Zhejiang Sujing Purifying Equipment Co., Ltd. specializes in the production of clean benches, biological safety cabinets, air showers and other laboratory-specific air purification complete sets of equipment. The company has ISO9001, medical equipment manufacturing enterprise license and other relevant qualification certificates, and the greatest guarantee in quality. User's rights. Zhejiang Sujing's production clean bench is an all-in-one machine that requires no additional parts to be installed. Simply plug in the power supply when you use it.
Clean bench installation
1. The selection of the installation position of the clean bench will directly affect the use effect and service life. Therefore, when installing the clean bench, it must be installed in a factory with good sanitary conditions. It is better to have a plastic floor or a water mill floor in order to clean the dust, and pay attention to the sealing of the doors and windows to avoid external dust particles affecting the interior, so as to extend Service life and ideal purification effect.
2. Open the package and check whether the items listed in the physical and packing list are in compliance.
3. The installation position of the clean bench should be kept away from places with large vibrations and noises, especially the impact of vibration on it. Measures should be taken if there is vibration around it.
4. In order to increase the service life of the filter, it is strictly prohibited to install it in the work area that generates high-speed dust particles.
5. The normal flow of air in the purification zone is an important factor to ensure the purification effect, and it is strictly prohibited to install it in places susceptible to the influence of the outside air flow.
6. If there are conditions, check the leakage air flow. The inspection of the leak is to move the probe of the energy meter along the edge of the outlet end face of the operating area and observe the pointer of the meter. When the pointer is deflected once, there is a hole. Repeatedly inspect the entire outlet section, determine the location of the leak, and correct it. Leakage may be caused by the fact that the edge seal sponge pad is not compressed or damaged, or that the high efficiency filter has a leak. The inspection of the air leakage was performed with a hot ball anemometer. After the fan was started, the anemometer probe was placed at 200 mm from the operating table. The probe was placed on each position and the dial pointer reading was observed. Whether there was an abnormal wind speed or not. produce.
The composition and use of the clean bench
The composition of the clean bench: fan, air filter, box, frame, work surface, lights and other components.
Purification table use: widely used in medical and health, bio-pharmaceuticals, food, medical science experiments, optics, electronics, sterile room experiments, sterile microbiological testing, plant tissue culture inoculation and other needs of the local clean sterile working environment of scientific research and production department. Can also be connected into an assembly line with low noise, mobility and other advantages. It is a kind of air purification equipment that provides a high degree of local cleanliness and working environment. Its use has a good effect on improving process conditions, improving product quality and increasing the yield.
maintain:
1, according to the actual use of the situation, the initial efficiency of the filter is periodically removed and cleaned, the cleaning cycle is generally 3 to 6 months. (If you don't wash it for a long time, dust will affect the insufficient air intake and reduce the cleansing effect.)
2. After the normal exchange or cleaning of the primary efficiency air filter can not reach the ideal cross-section wind speed, you should adjust the fan's working voltage (rotate the knob), so as to achieve the ideal uniform wind speed (when the new bench is used, the fan The operating voltage can be adjusted to 80V~90V.)
3. Generally, when the fan operating voltage is adjusted to the highest point after 18 months of use, the ideal wind speed can still not be reached. This indicates that the high-efficiency air filter has excessive dust accumulation (filter material has basically been blocked by the filter hole. Timely update), the use period of general high-efficiency air filter is 18 months.
4. When replacing the high-efficiency air filter, it should be noted that the model size is correct (formerly the manufacturer's configuration), press the arrow wind direction device, and should pay attention to the surrounding sealing of the filter, absolutely no leakage occurs.
Zhejiang Sujing Purification Equipment Co., Ltd. is located in Daoshui Town, Shangyu District, Shaoxing City, Zhejiang Province, and is a leading manufacturer of purification equipment in East China. Can provide professional air purification systems for industries such as microelectronics, biomedicine, hospital operating rooms, fiber optic cables, food and beverages, precision instruments, semiconductors, and new material applications in accordance with the ISO14644-1 standard, GB50073-2001 national standard, and national GMP specifications. Engineering design, construction, testing and technical services.
The company's main purification table series, air shower series, fume hood series, biological safety cabinet series are widely used in medical and health, electronics, pharmaceuticals, biology, food, agriculture, forestry, animal husbandry and veterinary, inspection and quarantine, aerospace, automotive manufacturing, Precision instruments, universities and research institutes enjoy a high reputation in the domestic and Southeast Asian markets.
Zhejiang Sujing Purifying Equipment Co., Ltd. is dedicated to serving consumers and distributors all over the world. We will provide you with the best quality products, the most humane services and the lowest price. We sincerely welcome you to join us!
Gantry Crane can be a Single Girder Gantry Crane, Double Girder Gantry Crane, Rtg Crane or project gantry cranes with capacity 1t - 900t. Gantry cranes are usually employed to handle project materials, bulk material, containers, etc at outdoor working site, container yard, shipbuilding yard, bulking material site, road construction site, etc.
Features of Gantry Crane:
1. Box type girder, weld structure, large working space, and convenient installation and maintenance;
3. Components is of standardization, seriation and generalization;
4. Power supply can be from cable reel (left and right) and conductor bar( left and right);
5. Broad view of cab, equipped the internal linkage control console, flexible and comfortable operation, install of fan, heater, cooler, air-conditions and intercom according to the customers' requirements;
6. Customized lift height, span, power supply, operation (pendant, cabin) and gantry crane structure (girder, supporting legs, cantilever).
Main Data of Gantry Crane:
Capacity: 1t - 900t or custom
Lift Height: 6m - 40m or custom
Span: 6m - 70m or custom
Work Duty: A4, A5, A6,A7or custom
Weihua provide professional gantry crane solutions, customized cranes, Crane Components, installation, after sale service. Weihua products export to 110 countries such as Russia, Thailand, Malaysia, Egypt, Saudi Arabia, Parkistan, the Philippines, Mexico, etc. Our success comes from customers' success. Welcome to visit Weihua.
Gantry Crane
Goliath Crane,Gantry Crane,Rubber Tyred Gantry Crane,Light Gantry Crane
Henan Weihua Heavy Machinery Co., Ltd. , http://www.weihuacranefactory.com