10 Years Factory Organic Waste Gas Treatment Machine System

Technical parameter:
 



 Introduction of two main type

A) Dry Exhaust Gas Scrubber:Dry scrubber use a catalyst to remove toxic components by chemisorption or adsorption to their surface. The required contact time is very short and does not depend on the inlet concentration. When most of the material has reacted, the cartridge with the catalyst has to be exchanged. This abatement method can be used for almost all processes used in the microelectronic industry. It does not require power, gases, or water for the gas cleaning. However, it requires maintenance. The catalyst has to exchanged regularly and the waste material has to be disposed. Adsorber material mixed with some color agent or indicator is used to indicate in a special window, when 90% of the catalyst has been used and the material needs to be exchanged. It is possible to install an automatic alarm based on an electronic color sensor. 

  B) Wet Exhaust Gas Cleaning:A wet scrubber is a simple method to clean exhaust air or exhaust gas and remove toxic or smelling compounds. In the flue gas scrubber, the gas gets in close contact with fine water drops in a co-current or counter current flow. This method is more effective when the water drop size gets smaller and the total surface between water or washing fluid and the gas gets larger. The water or washing fluid is recirculated normally in order to save water and reduce the amount of waste water.



Application:
  
 Acid gas: sulfuric acid, HLC, nitric acid, HF etc.
 Alkali gas: NAOH, KOH, NHS etc.
 Organic gas: benzenes, alcohols, phenols.
 We used different absorption solvent for dealing with different harmful gas.

Equipment characteristics

· Low fuel consumption, and low operating cost. When organic matter reaches a certain concentration , its burning calories are enough to maintain the normal operation of the equipment without additional fuel.
· High purification efficiency, which is more than 96% ,98% and 99% respectively for two- chamber , three-chamber and multi- chamber rotation type structures
· No econdary pollution of common organic matter with CHO
· Even heat accumulating type temperature change , good heating effect, small hearth capacity, and low equipment cost
· Even and slow temperature rise in furnace , no pulse phenomena caused due to pressure change , small furnace loss , and long service life of equipment.
· Full-automatic control, simple operation, and stable, safe and reliableoperation.
· Compact structure and small footprint.


 


Technical parameter:
 



 Introduction of two main type

A) Dry Exhaust Gas Scrubber:Dry scrubber use a catalyst to remove toxic components by chemisorption or adsorption to their surface. The required contact time is very short and does not depend on the inlet concentration. When most of the material has reacted, the cartridge with the catalyst has to be exchanged. This abatement method can be used for almost all processes used in the microelectronic industry. It does not require power, gases, or water for the gas cleaning. However, it requires maintenance. The catalyst has to exchanged regularly and the waste material has to be disposed. Adsorber material mixed with some color agent or indicator is used to indicate in a special window, when 90% of the catalyst has been used and the material needs to be exchanged. It is possible to install an automatic alarm based on an electronic color sensor. 

  B) Wet Exhaust Gas Cleaning:A wet scrubber is a simple method to clean exhaust air or exhaust gas and remove toxic or smelling compounds. In the flue gas scrubber, the gas gets in close contact with fine water drops in a co-current or counter current flow. This method is more effective when the water drop size gets smaller and the total surface between water or washing fluid and the gas gets larger. The water or washing fluid is recirculated normally in order to save water and reduce the amount of waste water.



Application:
  
 Acid gas: sulfuric acid, HLC, nitric acid, HF etc.
 Alkali gas: NAOH, KOH, NHS etc.
 Organic gas: benzenes, alcohols, phenols.
 We used different absorption solvent for dealing with different harmful gas.

Equipment characteristics

· Low fuel consumption, and low operating cost. When organic matter reaches a certain concentration , its burning calories are enough to maintain the normal operation of the equipment without additional fuel.
· High purification efficiency, which is more than 96% ,98% and 99% respectively for two- chamber , three-chamber and multi- chamber rotation type structures
· No econdary pollution of common organic matter with CHO
· Even heat accumulating type temperature change , good heating effect, small hearth capacity, and low equipment cost
· Even and slow temperature rise in furnace , no pulse phenomena caused due to pressure change , small furnace loss , and long service life of equipment.
· Full-automatic control, simple operation, and stable, safe and reliableoperation.
· Compact structure and small footprint.


 

FantasView can supply the Truck And Bus Wiper Arms same as original type, all with first-class quality.

They can use for CAERANO CARVIN (I) CITROEN DAF DEN OUDSTEN DODGE EBRO(MOTOR IBERICA) ERF FODEN FORD IVECO(OM) JONCKHEERE KASSBOHRER KASSBOHRER (SETRA) MERCEDES-BENZ OBRADORS ORENSTEIN U.KOPPEL PEGASO SMIT STEYR TAM VAN HOOL VOLKSWAGEN VOLVO

Truck and Bus Wiper Arms

Truck And Bus Wiper Arms,Heavy Duty Wiper Arms,Heavy Duty Truck Wiper Arms,Truck Windshield Wiper Arms

NINGBO FANTASVIEW WIPER BLADES CO., LTD. , http://www.fantasview.com