Specialist in pump industry for over 35 years.
Brief introduction Â
Gear Oil Pump with Classification Society Approval
2CY series Gear pump is mainly to carry the lubricator in various lubricating system of mechanical equipments, also it's suitable to carry the oils with the lube feature and their viscosity should below 300cst and the temperature should less than 300 degree centigrade, furthermore, the gear pump in stainless steel can transport the edible oils, beverages and so on. The pump hasn't valve itself. Shaft seal has skeleton oil seal, mechanical seal and stuffing seal.
| Model | Capacity (m3/h) |
Pressure (MPa) |
Vaccum (m. H2O) |
Diameter (inch/mm) |
Face to Face (mm) |
Power (KW) |
| 2CY1.1/14.5 | 1.1 | 1.45 | 5 | G3/4" | 200 | 1.5 |
| 2CY2/14.5 | 2 | 1.45 | 5 | G3/4" | 200 | 2.2 |
| 2CY3.3/3.3 | 3.3 | 0.33 | 5 | G1" | 200 | 1.5 |
| 2CY5/3.3 | 5 | 0.33 | 5 | G1 1/2" | 200 | 2.2 |
| 2CY8/3.3 | 8 | 0.33 | 5 | G2" | 260 | 3 |
| 2CY8/6 | 8 | 0.6 | 5 | G2" | 260 | 4 |
| 2CY8/10 | 8 | 1 | 5 | G2" | 260 | 5.5 |
| 2CY12/1.3 | 12 | 0.13 | 5 | G2" | 260 | 4 |
| 2CY12/3.3 | 12 | 0.33 | 5 | G2" | 260 | 5.5 |
| 2CY12/6 | 12 | 0.6 | 5 | G2" | 260 | 5.5 |
| 2CY12/10 | 12 | 1 | 5 | G2" | 260 | 7.5 |
| 2CY18/3.6 | 18 | 0.36 | 5 | 70 | 234 | 5.5 |
| 2CY18/6 | 18 | 0.6 | 5 | 70 | 234 | 7.5 |
| 2CY29/3.6 | 29 | 0.36 | 5 | 70 | 234 | 7.5 |
| 2CY29/6 | 29 | 0.6 | 5 | 70 | 234 | 11 |
| 2CY38/2.8 | 38 | 0.28 | 5 | 100 | 280 | 11 |
| 2CY38/6 | 38 | 0.6 | 5 | 100 | 280 | 22 |
| 2CY60/3 | 60 | 0.3 | 5 | 100 | 280 | 22 |
| 2CY100/3 | 100 | 0.3 | 5 | 150 | 400 | 30 |
| 2CY100/6 | 100 | 0.6 | 5 | 150 | 400 | 55 |
| 2CY120/3 | 120 | 0.3 | 5 | 150 | 400 | 30 |
| 2CY120/6 | 120 | 0.6 | 5 | 150 | 400 | 55 |
| 2CY150/3 | 150 | 0.3 | 5 | 150 | 400 | 37 |
| 2CY150/6 | 150 | 0.6 | 5 | 150 | 400 | 75 |
After sale service
Within warranty period, for non-artificial quality problem, we will repair and replace spare parts for free. Except for normal wear and tear of parts.
We can provide all kind of pump
- centrifugal pump
- screw pump
- vortex pump
- gear pump
- diaphragm pump
- hydraulic deep well cargo pump
- electric deep well cargo pump
- hand pump
- bulkhead seal
- tank washing machine
What is the difference between a SDLG Torque Converter and a gearbox?
The torque converter is part of the automatic transmission (AT).
The torque converter consists of a pump wheel, a turbine wheel and a guide wheel. It is installed between the engine and the transmission and uses hydraulic oil (ATF) as the working medium to transmit torque, change torque, speed change and clutch.
The pump wheel and turbine of the torque converter form a closed working chamber that allows the liquid to circulate. The pump wheel is installed on the input shaft, and the turbine is installed on the output shaft. When the power machine (internal combustion engine, electric motor, etc.) drives the input shaft to rotate, the liquid is thrown out by the centrifugal pump wheel. After this high-speed liquid enters the turbine, it drives the turbine to rotate, and transfers the energy obtained from the pump wheel to the output shaft. Finally, the liquid returns to the pump wheel, forming a cyclical flow. The torque converter transfers torque by generating changes in momentum moment by the interaction of the liquid with the impeller and turbine blades. Its output torque is equal to the input torque minus the friction torque, so its output torque is always less than the input torque. The input shaft and output shaft of the torque converter rely on liquid connection, and there is no rigid connection between the working components.(Sdlg Loader Torque Converter,Hydraulic Converter Parts,Torque Converter,Low Speed Turbine Set)
Torque Converter
Sdlg Loader Torque Converter,Hydraulic Converter Parts,Torque Converter,Low Speed Turbine Set
Shandong Tianfu International Trade Co.,Ltd. , https://www.tfloaderparts.com