Model NO.: MP
Application: Chemical Pump
Industry: Pharmaceutical Pump
Media: Sea Water Pump
Performance: No Leakage Pump
Theory: Electromagnetic Pump
Shaft Seal: Sealess
Trademark: SUOTO
Origin: Shanghai, China
HS Code: 841301090
Model NO.: MP
Application: Chemical Pump
Industry: Pharmaceutical Pump
Media: Sea Water Pump
Performance: No Leakage Pump
Theory: Electromagnetic Pump
Shaft Seal: Sealess
Trademark: SUOTO
Origin: Shanghai, China
HS Code: 841301090
OverviewMagnetic-driven plastic pump is running even the shaft and impeller, respectively, equipped with magnetic coupling and the mutual attraction, with no conventional mechanical seal, which is completely sealed.
Motor torque by rotating active magnetic and gravitational magnetic follower driven operation. Nowadays, magnetic drive pump used great disadvantage is the lack of fluid is absolutely no circumstances will be running machine or damage, it caused users unnecessary trouble and annoyance. But "Haihe Pumps" magnetic drive pumps do not have to worry about above case. It selects a special formula specifically designed for ceramic bearings, with very strong resistance to abrasion and corrosion resistance to the advanced performance and quality to ensure absolute safety.
Magnetic drive circulation pump adopt seal-free design, completely avoid the traditional mechanical pump seal leak the existence of liquid after the pollution caused by corrosion of the defects, industrial equipment is the most ideal liquid pump.
Specification
Flow Range: 8 ~ 330L/min
Head Range: 1 ~ 18m
Main materials: GFRPP
Power range: 3 ~ 2200W
Liquid temperature range: 0 ~ 80 degree
Application:
This pump can transport acid, alkali, salt, oil, beverages and other media, are widely used in chemical, petrochemical, fine chemicals, dyes chemical industry, environmental protection, water treatment, medicine, food and other departments.
Performance Table
| Model                   |       Tube Connection | Thread Connection | MaxFlow (L/min) |
MaxHead  (m) |
Standard | S. G | Motor | ||||
| Inlet(mm) | Outlet(mm) | Inlet(inch) | Outlet(mm) | 50Hz/60Hz | 50Hz/60Hz | Flow(L/min)50Hz/60Hz  | Head(m) 50Hz/60Hz |
Power(w) 50Hz/60Hz |
Phase | ||
| MP-6R | 14 | 14 | - | - | 8/9 | 1/1.4 | 2.8/5 | 0.8 | < 1.2 | 3 | 1 |
| MP-6RZ | 14 | 14 | - | - | 5.5/6 | 2.1/2.7 | 3.2/4.5 | 0.8 | < 1.1 | 3 | 1 |
| MP-10R | 14 | 14 | - | - | 11/12 | 1.5/2.1 | 5/8 | 1 | < 1.1 | 6 | 1 |
| MP-10RN | 14 | 14 | - | - | 11/12 | 1.5/2.1 | 5/8 | 1 | < 1.1 | 6 | 1 |
| MP-15R | 16 | 16 | - | - | 16/19 | 2.7/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
| MP-15RN | 16 | 16 | - | - | 16/19 | 2.7/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
| MP-15RM | - | - | 3/4 | 13 | 16/19 | 2.4/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
| MP-20R | 18 | 18 | - | - | 27/32 | 3.1/4.3 | 17/22 | 2 | < 1.2 | 20 | 1 |
| MP-20RM | - | - | 3/4 | 16 | 27/32 | 3.1/4.3 | 17/22 | 2 | < 1.2 | 20 | 1 |
| MP-20RX | 26 | 26 | - | - | 46/52 | 1.8/2.5 | 30/40 | 1 | < 1.3 | 20 | 1 |
| MP-20RXM | - | - | 1 | 20 | 46/52 | 1.8/2.5 | 30/40 | 1 | < 1.3 | 20 | 1 |
| MP-2RZ | 18 | 18 | - | - | 10/11 | 4.6/6.9 | 7/10 | 4 | < 1.1 | 20 | 1 |
| MP-20RZM | - | - | 3/4 | 13 | 10/11 | 4.6/6.9 | 7/10 | 4 | < 1.1 | 20 | 1 |
| MP-30R | 20 | 20 | - | - | 33/38 | 3.8/5.4 | 16/25 | 2.5 | < 1.3 | 45 | 1 |
| MP-30RM | - | - | 3/4 | 16 | 33/38 | 3.8/5.4 | 16/25 | 2.5 | < 1.3 | 45 | 1 |
| MP-30RX | 26 | 26 | - | - | 62/72 | 2.9/4.1 | 32/46 | 2 | < 1.1 | 45 | 1 |
| MP-30RXM | - | - | 1 | 20 | 62/72 | 2.9/4.1 | 32/46 | 2 | < 1.1 | 45 | 1 |
| MP-30RZ | 18 | 18 | - | - | 15/17 | 8/11 | 10/14 | 6 | < 1.1 | 45 | 1 |
| MP-30RZM | - | - | 3/4 | 13 | 15/17 | 8/11 | 10/14 | 6 | < 1.1 | 45 | 1 |
| MP-40R | 20 | 20 | - | - | 45/52 | 4.6/6.5 | 22/34 | 4 | < 1.1 | 65 | 1 |
| MP-40RM | - | - | 3/4 | 16 | 45/52 | 4.6/6.5 | 22/34 | 4 | < 1.1 | 65 | 1 |
| MP-40RX | 26 | 26 | - | - | 75/85 | 3.3/4.7 | 47/65 | 2 | < 1.1 | 65 | 1 |
| MP-40RXM | - | - | 1 | 20 | 75/85 | 3.3/4.7 | 47/65 | 2 | < 1.1 | 65 | 1 |
| MP-55R | 26 | 26 | - | - | 60/70 | 5.6/8.2 | 30/45 | 4 | < 1.2 | 90 | 1or3 |
| MP-55RM | - | - | 1 | 20 | 60/70 | 5.6/8.2 | 30/45 | 4 | < 1.2 | 90 | 1or3 |
| MP-55RZ | 26 | 26 | - | - | 25/28 | 10/14 | 15/22 | 8 | < 1.1 | 90 | 1or3 |
| MP-55RZM | - | - | 1 | 20 | 25/28 | 10/14 | 15/22 | 8 | < 1.1 | 90 | 1or3 |
| MP-70R | 26 | 26 | - | - | 86/97 | 6.7/9.7 | 50/72 | 4 | < 1.1 | 150/180 | 1or3 |
| MP-70RM | - | - | 1 | 20 | 86/97 | 6.7/9.7 | 50/72 | 4 | < 1.1 | 150/180 | 1or3 |
| MP-100R | 26 | 26 | - | - | 120/130 | 8.6/11.6 | 60/70 | 7/9 | < 1.3 | 250/265 | 1or3 |
| MP-100RM | - | - | 1 | 20 | 120/130 | 8.6/11.6 | 60/70 | 7/9 | < 1.3 | 250/265 | 1or3 |
| MP-100RX | - | - | 1 1/4 | 32 | 170 | 9.0 | 100 | 5.0 | < 1.3 | 250 | 1or3 |
| MP-120R | - | - | 1 1/2 | 36 | 220 | 10.5 | 140 | 6.0 | < 1.3 | 370 | 1or3 |
| MP-120RT | - | - | 2 1/4 | 48 | 220 | 10.5 | 140 | 6.0 | < 1.3 | 370 | 1or3 |
| MPH-400CV5-D | - | - | 1 1/2 | 36 | 260 | 12.5 | 150 | 8.5 | < 1.3 | 370 | 3 |
| MPH-401CV5-D | - | - | 1 1/2 | 36 | 330 | 18 | 200 | 12 | < 1.3 | 750 | 3 |
| MPH-422CV5-D | - | - | 2 | 1 1/2 | 300 | 21 | 200 | 18.5 | < 1.3 | 1500 | 1or3 |
| MPH-423CV5-D | - | - | 2 | 1 1/2 | 360 | 22 | 300 | 20.5 | < 1.3 | 2200 | |
Overview
Magnetic-driven plastic pump is running even the shaft and impeller, respectively, equipped with magnetic coupling and the mutual attraction, with no conventional mechanical seal, which is completely sealed.
Motor torque by rotating active magnetic and gravitational magnetic follower driven operation. Nowadays, magnetic drive pump used great disadvantage is the lack of fluid is absolutely no circumstances will be running machine or damage, it caused users unnecessary trouble and annoyance. But "Haihe Pumps" magnetic drive pumps do not have to worry about above case. It selects a special formula specifically designed for ceramic bearings, with very strong resistance to abrasion and corrosion resistance to the advanced performance and quality to ensure absolute safety.
Magnetic drive circulation pump adopt seal-free design, completely avoid the traditional mechanical pump seal leak the existence of liquid after the pollution caused by corrosion of the defects, industrial equipment is the most ideal liquid pump.
Specification
Flow Range: 8 ~ 330L/min
Head Range: 1 ~ 18m
Main materials: GFRPP
Power range: 3 ~ 2200W
Liquid temperature range: 0 ~ 80 degree
Application:
This pump can transport acid, alkali, salt, oil, beverages and other media, are widely used in chemical, petrochemical, fine chemicals, dyes chemical industry, environmental protection, water treatment, medicine, food and other departments.
Performance Table
| Model                   |       Tube Connection | Thread Connection | MaxFlow (L/min) |
MaxHead  (m) |
Standard | S. G | Motor | ||||
| Inlet(mm) | Outlet(mm) | Inlet(inch) | Outlet(mm) | 50Hz/60Hz | 50Hz/60Hz | Flow(L/min)50Hz/60Hz  | Head(m) 50Hz/60Hz |
Power(w) 50Hz/60Hz |
Phase | ||
| MP-6R | 14 | 14 | - | - | 8/9 | 1/1.4 | 2.8/5 | 0.8 | < 1.2 | 3 | 1 |
| MP-6RZ | 14 | 14 | - | - | 5.5/6 | 2.1/2.7 | 3.2/4.5 | 0.8 | < 1.1 | 3 | 1 |
| MP-10R | 14 | 14 | - | - | 11/12 | 1.5/2.1 | 5/8 | 1 | < 1.1 | 6 | 1 |
| MP-10RN | 14 | 14 | - | - | 11/12 | 1.5/2.1 | 5/8 | 1 | < 1.1 | 6 | 1 |
| MP-15R | 16 | 16 | - | - | 16/19 | 2.7/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
| MP-15RN | 16 | 16 | - | - | 16/19 | 2.7/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
| MP-15RM | - | - | 3/4 | 13 | 16/19 | 2.4/3.4 | 8/12 | 1.5 | < 1.3 | 10 | 1 |
| MP-20R | 18 | 18 | - | - | 27/32 | 3.1/4.3 | 17/22 | 2 | < 1.2 | 20 | 1 |
| MP-20RM | - | - | 3/4 | 16 | 27/32 | 3.1/4.3 | 17/22 | 2 | < 1.2 | 20 | 1 |
| MP-20RX | 26 | 26 | - | - | 46/52 | 1.8/2.5 | 30/40 | 1 | < 1.3 | 20 | 1 |
| MP-20RXM | - | - | 1 | 20 | 46/52 | 1.8/2.5 | 30/40 | 1 | < 1.3 | 20 | 1 |
| MP-2RZ | 18 | 18 | - | - | 10/11 | 4.6/6.9 | 7/10 | 4 | < 1.1 | 20 | 1 |
| MP-20RZM | - | - | 3/4 | 13 | 10/11 | 4.6/6.9 | 7/10 | 4 | < 1.1 | 20 | 1 |
| MP-30R | 20 | 20 | - | - | 33/38 | 3.8/5.4 | 16/25 | 2.5 | < 1.3 | 45 | 1 |
| MP-30RM | - | - | 3/4 | 16 | 33/38 | 3.8/5.4 | 16/25 | 2.5 | < 1.3 | 45 | 1 |
| MP-30RX | 26 | 26 | - | - | 62/72 | 2.9/4.1 | 32/46 | 2 | < 1.1 | 45 | 1 |
| MP-30RXM | - | - | 1 | 20 | 62/72 | 2.9/4.1 | 32/46 | 2 | < 1.1 | 45 | 1 |
| MP-30RZ | 18 | 18 | - | - | 15/17 | 8/11 | 10/14 | 6 | < 1.1 | 45 | 1 |
| MP-30RZM | - | - | 3/4 | 13 | 15/17 | 8/11 | 10/14 | 6 | < 1.1 | 45 | 1 |
| MP-40R | 20 | 20 | - | - | 45/52 | 4.6/6.5 | 22/34 | 4 | < 1.1 | 65 | 1 |
| MP-40RM | - | - | 3/4 | 16 | 45/52 | 4.6/6.5 | 22/34 | 4 | < 1.1 | 65 | 1 |
| MP-40RX | 26 | 26 | - | - | 75/85 | 3.3/4.7 | 47/65 | 2 | < 1.1 | 65 | 1 |
| MP-40RXM | - | - | 1 | 20 | 75/85 | 3.3/4.7 | 47/65 | 2 | < 1.1 | 65 | 1 |
| MP-55R | 26 | 26 | - | - | 60/70 | 5.6/8.2 | 30/45 | 4 | < 1.2 | 90 | 1or3 |
| MP-55RM | - | - | 1 | 20 | 60/70 | 5.6/8.2 | 30/45 | 4 | < 1.2 | 90 | 1or3 |
| MP-55RZ | 26 | 26 | - | - | 25/28 | 10/14 | 15/22 | 8 | < 1.1 | 90 | 1or3 |
| MP-55RZM | - | - | 1 | 20 | 25/28 | 10/14 | 15/22 | 8 | < 1.1 | 90 | 1or3 |
| MP-70R | 26 | 26 | - | - | 86/97 | 6.7/9.7 | 50/72 | 4 | < 1.1 | 150/180 | 1or3 |
| MP-70RM | - | - | 1 | 20 | 86/97 | 6.7/9.7 | 50/72 | 4 | < 1.1 | 150/180 | 1or3 |
| MP-100R | 26 | 26 | - | - | 120/130 | 8.6/11.6 | 60/70 | 7/9 | < 1.3 | 250/265 | 1or3 |
| MP-100RM | - | - | 1 | 20 | 120/130 | 8.6/11.6 | 60/70 | 7/9 | < 1.3 | 250/265 | 1or3 |
| MP-100RX | - | - | 1 1/4 | 32 | 170 | 9.0 | 100 | 5.0 | < 1.3 | 250 | 1or3 |
| MP-120R | - | - | 1 1/2 | 36 | 220 | 10.5 | 140 | 6.0 | < 1.3 | 370 | 1or3 |
| MP-120RT | - | - | 2 1/4 | 48 | 220 | 10.5 | 140 | 6.0 | < 1.3 | 370 | 1or3 |
| MPH-400CV5-D | - | - | 1 1/2 | 36 | 260 | 12.5 | 150 | 8.5 | < 1.3 | 370 | 3 |
| MPH-401CV5-D | - | - | 1 1/2 | 36 | 330 | 18 | 200 | 12 | < 1.3 | 750 | 3 |
| MPH-422CV5-D | - | - | 2 | 1 1/2 | 300 | 21 | 200 | 18.5 | < 1.3 | 1500 | 1or3 |
| MPH-423CV5-D | - | - | 2 | 1 1/2 | 360 | 22 | 300 | 20.5 | < 1.3 | 2200 | |
Groove and raceway machining of bearing ring is the final processing procedure of bearing ring.The surface roughness, high quality and low noise of bearing products can be obtained by ultra-precision machining of bearing rings after fine grinding with oilstone.
It is mainly used for superfinishing the outer groove of deep groove ball bearings, angular contact ball bearings& double-row ball bearings.
Main Structures and Features
1.Adopting
SIEMENS.FANUC.MITSUBISHI
full-digital servo-control system.
2.Centerless
clamp, bearing support, bearing pressure on the end face of workpiece.
3.The
adjustment of groove position is controlled by servomtor
4.The
consumption of oilstone can be compensated automatically.
5.The
oscillation frequency of oilstone and the turning speed of work can be adjusted
by frequency convertor, rough or fine superfinishing converted automatically.
Bearing Ring Super Finish Machine
Super Finishing Machine,Bearing Ring Super Finish Machine,Grooves Super Finish,Bearing Super Finish Machine
Xinxiang Sunrise CNC Bearing Equipment Co., Ltd. , https://www.cncsunrise.com