PE Plastic Processed Extrusion Blow Molding MachineÂ
Â
Product Description
ABLB75 extrusion bottle blow molding machine was specially designed for making plastic water bottles, lubricant oil bottles, detergent bottles, plastic toys and other plastic containers not over 8L.The features of this machine:
(1)It is suitable for producing PE, HDPE, PP, PVC, PETG, PS so on, plastic containers and bottles in all shapes are available, the max. Product volume is up to 8L.
(2)Single station single die head design, very easy to operate and maintenance.
(3)Most components of the blow moulding machine are from famous world brand.
(4)Fully automatic process with low power consumption, high efficiency, quick and safe operation, easy for maintenance.
(5)Multiple screw available for double layer or tranparent liquid lever line.
(6)Auto deflashing device available, can remove the extra parts of bottles.
(7)Auto lubricant system controlled by PLC.
Â
|
electronic parts |
 |
| Name | Trader |
| Micro computer control system | Japanese MITSUBISHI |
| Temperature Controller | TAIWAN YANHUAÂ PID |
| Auxiliary Relay | OMRON |
| contactor | Schneider from France |
| Electric motor | Three phase 220V or 380V |
| Power Source | TAIWAN MEANWELL |
| Transducer | TAIDA FROM CHINA |
| hydraulic parts |
 |
| Name | Trader |
| Oil pump | TAIWAN HIGH-TECH |
| Valve | JAPAN YUKEN |
| Oil pump and connection | JAPAN YUKEN |
| Sealed part | HALLITE |
| air control system |
 |
| Name | Trader |
| Cylinder | AIRTAC |
| Air Valve | FESTO |
| Max. Product volume | 8 liters |
| Output capacity | 120pcs/h |
| Screw diameter | 75mm |
| Screw L/D ratio | 24 L/D |
| Screw drive power | 22 KW |
| Screw heating capacity | 6 KW |
| No.of heating zone | 4 zones |
| Output of HDPE | 100KG/H |
| Oil pump drive power | 11 KW |
| Clamping force | 78KN |
| Max.size of mold | 188-600mm |
| Mold stroke | 400 X 450mm |
| Max.die diameter | 180mm |
| Blowing pressure | 0.6 mpa |
| Air Volume | 0.7 M³/MIN |
| Cooling water pressure | 0.3mpa |
| Water consumption | 60 L/MIN |
| Size of Machine | 3.6x1.8x2.8m |
| Weight of machine | 6.3 ton |
Â
Actually, a wiper assembly that refuses to move might have a simple blown fuse. But usually fuses don't blow on their own. Even at full stall, the current draw of the motor should be well below the fuse's rating. If the fuse is blown, odds are there's something else wrong, like a shorted wiper-motor armature or faulty wiring anywhere along the harness between the motor and the switch. Even a mechanical problem like a seized bushing can make a fuse eventually fail.
The fuse is okay, or you've replaced it with one that has the appropriate amp rating. There's still no action? With the wipers and ignition on, whack the motor assembly with the handle of a screwdriver or a rubber mallet. If that gets things moving, you've got a bad commutator or an open winding on the armature. When the motor parks, if the brushes are sitting on the bad segment, no current flows. Whacking the whole business smartly can sometimes jolt things into motion. Because there are often a dozen windings on the armature, the motor runs fine until the next time it comes to rest on the bad spot.
Pin Shaft Wiper Arm,Rear Windshield Wiper Arm,Window Wiper Arm,Marine Wiper Arm
COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD , https://www.capwiper.com