First, simply ask for a vehicle before getting on the bus. After renting a vehicle, it is first necessary to understand how the current condition of the vehicle is, especially if the operating system is sensitive and where problems are more likely to arise. Particular attention should be paid, especially to braking, steering, and lighting that directly affect traffic safety. In addition, check the fuel, coolant, lubricating oil, brake fluid, and main components of the transmission system. If necessary, try some distances to familiarize yourself with and check the working conditions of the clutch, throttle, brake, and engine. If any problems are found, promptly explain to the owner. In particular, vehicles rented from car rental companies need to be scrutinized carefully. Even some small problems must be made clear. You can't drive away with a glance. First, avoid traffic accidents. Second, reduce the number of vehicles returned. The trouble that arises. Second, find out the location of all instruments and operating systems.
Second, after entering the cab, you must first adjust the position of your driver's seat, and then from left to right, familiarize yourself with the role of each instrument and the location of the operating components. In order to grasp the position of the instrument and operating parts, first, you can read the manual for the use of the vehicle. As shown in the reference manual, it is clear that there are many auxiliary instruments, especially imported vehicles, which are difficult to understand at once and should be carefully examined. Second, in the absence of manuals, the owner can be directly informed to prevent chaos in the driving and distract. In particular, the position of the switch of each gear, horn, wiper, light switch, automatic door lock, instrument and various warning lights. Third, launch the vehicle, hands-on operation.
Third, before the road should be hands-on operation several times in front of the operating parts, not only helps to remember their location, but also can check their working conditions, more importantly, can avoid confusion in the operation of traffic. For example, light control switches, some are screwed, some are pulled, and some are pushed; some reverse gear is pushed directly, some are pressed first, and then pushed; wiper switches are on the steering wheel, and some on the dashboard ... These need to be handled through a few operations in order to be able to apply freely and avoid driving mistakes after traveling.
Fourth, start the vehicle, carefully look at the instrument and warning signals before the first few steps to clarify, but also in the case of engine operation, carefully observe the operation of various instruments and warning signal devices, with particular attention to the odometer and fuel gauge, engine Water temperature gauges, oil pressure gauges and ammeters indicate conditions. Many vehicles have used warnings to replace various meter pointers. They should carefully observe the flashing warning lights and be familiar with their location, purpose, and work situation. Each signal displayed on the dashboard reminds some of the issues that need attention. In short, when renting a vehicle, you must be more cautious and cautious. You must not behave rashly. You must be responsible for yourself from a safety perspective, and consider it from the point of view of your car. Can not just for the moment, no matter what, take the car away, once an accident, will regret it.
Propylene glycol is an important raw material for unsaturated polyester, epoxy Resin, and polyurethane resin. The amount in this area accounts for about 45% of the total consumption of propylene glycol. This unsaturated polyester is used in large quantities for surface coatings and reinforced plastics.
Propylene Glycol,Mono Propylene Glycol,PG 99.5%
Yucheng Jinhe Industrial Co.,Ltd , https://www.hncarbonblack.com