The three-wheel suction truck is a device widely used in rural methane tanks, manure pools, fish ponds, etc. It can also be used to clean up wastes and urban sewage. It is easy and flexible to use and has high work efficiency. The working principle of the three-wheel suction truck can be understood from the following aspects.
First, the workflow. The operation of the three-wheel suction vehicle is to discharge the air in the sealed tank to form a vacuum inside the tank. The pressure inside the tank is less than the atmospheric pressure. A connected pipe can be used to put the excrement pool, digester or fish pond. The waste inside allows the atmospheric pressure to propel the tank, thus achieving the purpose of the suction truck operation. The core of this process is the use of a vacuum pump. It can be mounted on a tricycle to drive the air inside the tank through the engine, and it can also be operated by an electric motor.
Second, the suction pump vacuum pump works. The vacuum pump is the core equipment of the suction truck. Let's take a look at how it works. The rotor inside the vacuum pump rotates at a relatively high speed. The blades in the pump will slide against the inner wall of the pump under the effect of centrifugal force. This will increase the capacity of the suction, and the gas withdrawn from the tank will enter. To the inside. As the rotor continues to rotate, the extracted air is gradually compressed, which creates a high pressure. When this pressure exceeds the pressure at the exhaust port, these gases can be discharged. After a certain period of time, the air inside the tank can be discharged to form a vacuum. Afterwards, the suction truck can start working until the entire work is completed.
Third, the problem that should be paid attention when using a three-wheel suction truck. When working with a suction truck, pay attention to the installation and use of the vacuum pump. If the tricycle itself cannot provide powerful power, then an external engine is required so that the effect of pumping the air out of the tank can be achieved. In addition, the vacuum pump of the suction truck is generally an oil pump. Pay attention to adding oil and antifreeze oil to ensure that the equipment can be used normally.
Medical Consumables Plastic Mould
Hospital and medical consumables refers to waste bins, disposable medical syringe, medical disposable bucket and baskets, the molding material is medical grade PP, volume can be different from 1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 50ml, 60ml to 100ml, and needle is 16G-27G, Needle material: stainless steel 304 and life is 5 years. Please review the following specifications in details:
Standard needle size:
Usage:
Tear the single bag of syringe, remove the syringe with needle, remove the syringe needle protection sleeve, pull the plunger back and forth slide, tighten the injection needle, and then into the liquid, needle up, slowly push the plunger to exclude air, subcutaneous or Intramuscular injection or blood.
Storage condition:
Disposable Medical Plastic 2 ml Syringe Luer Slip store in the relative humidity not to surpass 80%, non-corrosiveness gas, cool, ventilates good, in dryly the clean room. Product sterilized by Epoxy hexylene, asepsis,non-pyrogen without unusual toxicity and hemolysis response.
Machining equipment:
FAQ:
Q1: How do you control quality of Disposable syringe mould quality?
A: We use our CMM measuring equipment to inspect mould critical dimensions and mould tryout sample parts, all dimension reports will be shared with customer and discussed with customer the best solutions to solve "NG" dimensions.
Q2: What are the MOQ and leading time?
A: 200000pcs each type; leading time is within 35 days or based on your quantity;
Q3: What are the terms of payment?
A: 50% in advance by T/T; the balance 50% by T/T before shipping or again copy of B/L, L/C are acceptable.
Q4: How to keep us away from risk?
A: Our manufacturing is with rules of CE, ISO, welcome to visit our factory, and we can send you samples before placing an order.
Medical Consumables Plastic Mould,Metal Injection Molding,Medical Syringe Plastic Injection Mould,Disposable Syringe Plastic Injection Mould
Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com