Claim:
1. The auxiliary support, vehicle sensing and shooting device, and auxiliary light source are reasonably configured in combination with the road traffic conditions at the construction site. All illegal vehicles can be automatically captured 24 hours a day, 24 hours a day; captured images contain all the characteristics of the vehicle, plus time, place, and direction characteristics. Implement illegal vehicle capture. With various types of information database management and system (including functional modules and their power supply) automatic fault diagnosis and remote monitoring, remote maintenance and other functions.
2. Brackets (cantilever racks or columns) must comply with the relevant technical specifications, standards, and actual conditions of intersections, and provide relevant technical parameters and standards. The height of the support arm should ensure that the height of the camera and the auxiliary light source after installation is not less than 6.0m. The base of the bracket shall be firmly fixed on the reinforced concrete base embedded in the anchor bolts for the roadside (relevant drawings are provided), which can withstand the wind speed of 35m/s. The lightning protection device and interface box should be reasonably set on the bracket.
How to install the monitoring pole for traffic electronics*?
Installation process:
1. The auxiliary light source should be a high-efficiency, energy-saving, long-life LED cold light fixture with a power of no more than 60W. Do not use a light source or illumination method that may cause glare and affect the safety of the vehicle when the angle between the light beam and the ground or the horizontal line is less than 75 degrees. The power supply of the auxiliary light source should be relatively independent of the power supply of the vehicle sensing and shooting device. It can be controlled by the control panel at preset times to turn on the lighting at night or during daytime when the light is insufficient. When the light is sufficient during the day, the lighting is turned off.
2. Induction coil detection must be used for vehicle sensing.
3, choose high-resolution, low illumination, good stability, with a dynamic anti-back light, automatic compensation of background light, white balance automatic adjustment and other features of the industrial-grade camera, the matching lens should use large aperture, fast automatic aperture adjustment professional Lens. The camera should be equipped with an outdoor protective cover. It is required that both the images of the vehicles captured during the day and night must be able to see both the entire vehicle and the vehicle number plates.
4, industrial control host must use high-performance industrial-grade control machine. According to the actual situation of each construction site, the video acquisition and control device should be reasonably configured, and suitable expansion and upgrade margins should be left. Chinese interface, simple and intuitive, easy to operate. The use of video image fusion technology is required to increase the capture rate and recognition rate of vehicles and license plates. Each functional module (including operating parameters, etc.) can be flexibly configured and managed according to actual needs. Can store no less than 500,000 vehicle image information, automatic refresh, circular storage. With perfect system management (including user operation rights management, hacking and virus prevention, etc.) functions and software support. The system upgrade should be automatically downloaded on the client after the server upgrade.
5, optical cables, power cables, etc. should be in place, reliable connection between the plug and plug, power cord and signal lines, control lines should be clearly separated. All cables shall have clearly identifiable numbers or logos, and their concealed parts, bare or curved parts shall be required to be sheathed and protected according to the equipment material requirements. The strong and weak parts of each point must be properly equipped with lightning protection devices. The connection, arrangement, direction, bending and grounding of cables and pipelines shall comply with the relevant national regulatory requirements.
1. The auxiliary support, vehicle sensing and shooting device, and auxiliary light source are reasonably configured in combination with the road traffic conditions at the construction site. All illegal vehicles can be automatically captured 24 hours a day, 24 hours a day; captured images contain all the characteristics of the vehicle, plus time, place, and direction characteristics. Implement illegal vehicle capture. With various types of information database management and system (including functional modules and their power supply) automatic fault diagnosis and remote monitoring, remote maintenance and other functions.
2. Brackets (cantilever racks or columns) must comply with the relevant technical specifications, standards, and actual conditions of intersections, and provide relevant technical parameters and standards. The height of the support arm should ensure that the height of the camera and the auxiliary light source after installation is not less than 6.0m. The base of the bracket shall be firmly fixed on the reinforced concrete base embedded in the anchor bolts for the roadside (relevant drawings are provided), which can withstand the wind speed of 35m/s. The lightning protection device and interface box should be reasonably set on the bracket.
How to install the monitoring pole for traffic electronics*?
Installation process:
1. The auxiliary light source should be a high-efficiency, energy-saving, long-life LED cold light fixture with a power of no more than 60W. Do not use a light source or illumination method that may cause glare and affect the safety of the vehicle when the angle between the light beam and the ground or the horizontal line is less than 75 degrees. The power supply of the auxiliary light source should be relatively independent of the power supply of the vehicle sensing and shooting device. It can be controlled by the control panel at preset times to turn on the lighting at night or during daytime when the light is insufficient. When the light is sufficient during the day, the lighting is turned off.
2. Induction coil detection must be used for vehicle sensing.
3, choose high-resolution, low illumination, good stability, with a dynamic anti-back light, automatic compensation of background light, white balance automatic adjustment and other features of the industrial-grade camera, the matching lens should use large aperture, fast automatic aperture adjustment professional Lens. The camera should be equipped with an outdoor protective cover. It is required that both the images of the vehicles captured during the day and night must be able to see both the entire vehicle and the vehicle number plates.
4, industrial control host must use high-performance industrial-grade control machine. According to the actual situation of each construction site, the video acquisition and control device should be reasonably configured, and suitable expansion and upgrade margins should be left. Chinese interface, simple and intuitive, easy to operate. The use of video image fusion technology is required to increase the capture rate and recognition rate of vehicles and license plates. Each functional module (including operating parameters, etc.) can be flexibly configured and managed according to actual needs. Can store no less than 500,000 vehicle image information, automatic refresh, circular storage. With perfect system management (including user operation rights management, hacking and virus prevention, etc.) functions and software support. The system upgrade should be automatically downloaded on the client after the server upgrade.
5, optical cables, power cables, etc. should be in place, reliable connection between the plug and plug, power cord and signal lines, control lines should be clearly separated. All cables shall have clearly identifiable numbers or logos, and their concealed parts, bare or curved parts shall be required to be sheathed and protected according to the equipment material requirements. The strong and weak parts of each point must be properly equipped with lightning protection devices. The connection, arrangement, direction, bending and grounding of cables and pipelines shall comply with the relevant national regulatory requirements.
This product [500t Cement Silos" is adopt chip-mounted cement silo is specially designed and developed for the difficulty of packing and the high transportation cost. The top of the warehouse is equipped with a pressure relief valve to balance the pressure inside the chamber. Prevent explosions. Each cement silo is provided with an upper and lower material level indicator, which can display the empty state of the silo.
500 Ton Cement Silo,500T Concrete Cement Silo,500T Cement Silos,500T Bolted Cement Silo
Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.zeyuconcretemachine.com