The three-wheel suction truck is a dump-type vehicle. It is the main tool for towns and small businesses to deal with sewers and septic tanks. Using the working principle of the vacuum pump, the use of a three-wheel suction truck has brought great help to the work of the sanitation workers. However, how should such a machine for cleaning metabolites be cleaned? Below, Xiao Bian took everyone to learn about the cleaning tips of the two models.
The first point is that the water used for cleaning must be clean water, because the sewage carrying fine sand will cause certain wear and tear on the machine.
The second point of attention when cleaning the suction truck is the frequency of cleaning. General requirements must not be too severe, and they will damage the vehicle paint. If you encounter the use of vehicles in the summer, it is best not to wash your car immediately after use, so as to avoid damage to its starting vehicle. The correct way is to wait for the engine to cool before cleaning.
The third cleaning point is waterproof work. Although it is a suction truck, but not all parts can meet the water, such as speakers, lights and other parts, must be done when cleaning the waterproof work to prevent damage.
The fourth point of attention is for placement after cleaning. Xiao Bian suggests placing it in a cool and ventilated place. This not only can prevent the sun from damaging the machine, but also can make the work more convenient.
When we wipe the machine, we'd better use a special clean towel, which is to avoid the normal rough towel damage to the machine.
The above five points are the main cleaning precautions for the three-wheel suction truck . In the summer, many vehicles are naturally in a state of unconsciousness. Therefore, when we clean vehicles, we will also take safety measures, turn off the power supply, and do a good job of protecting the machine from damage. Being familiar with these little common sense points can effectively reduce many of our daily mistakes that could have been avoided. Some seemingly simple tricks, if done well, will provide good protection for the vehicle, while neglect will cause invisible harm.
Crane Wire Rope
Made of multiple strands wound together, the steel wire rope is one of the most crucial components in a crane. Each strand has a tensile strength ranging between 1470 N/mm2 and 2160N/mm2.As the load carrying rope used in the hoisting mechanism, it can be sent through different surface treatment to suit specific environmental condition.
Advantages
High strength
Maximum flexibility
Stable, quiet operation
Torque balanced rope is not as easily kinked.
Good rotary stability
Long use life
Technical Features
Breaking Strength
Designed for higher breaking strength and better strength to weight ratio, our crane wire rope is made of high-toughness steel wires that have been stretched to their tolerance limit prior to being stranded together to form a rope with optimum spacing between each strand.
Even if wire strands are tightly twisted, there still be spaces in places where the strand touches with each other. To improve the fill factor of the wire rope, we have added irregularly-shaped wire strand to the rope and sent it through rotary swaging process. Steel wires that are laid in a parallel pattern increase the cross section of the rope.
Safety
Special-purpose steel rope is commonly seen in various engineering projects. Via precision design and rigorous test, the rope usually can meet very high safety standards. A large number of wires are arranged in a parallel pattern to form a strand. Various strands then are twisted to produce the steel rope. Such a rope-making method ensures an improved safety performance of the rope
Rotation
Our rotation-resistant wire rope contains several strands laid helically around an independent rope core. The lay direction of outer strands is opposite to that of the independent core so that the overall rope can be non-rotating. This series of rope mainly functions as a lifting tool in the crane. It also can be used in a rope take-up system that requires many times of rope winding.
Bending Fatigue
Increasing the number of strands within a rope and wires in a strand can lead to an extended contact between the rope and the sheave groove or grooved Cable Drum, thereby reducing the stress acted on average rope. Through adding irregularly-shaped strand to the wire as well as rotary
Swaging process, this contact area will increase to greater extent, as with the decrease of rope stress. Greater flexibility of our steel wire rope means that it can be wound in smaller, tighter circular patterns. When installing the rope onto the drum assembly, its steel and plastic combination design will increase the stability of the whole structure, avoiding internal wire breaking which in turn extends its use life.
Applications
Port, waste management, wind power, automobile, transformer, storage and logistics, steel, container, tunnel, construction machinery, metallurgy, and shipbuilding industries.
Wire Rope,Crane Wire Rope,High Strength Wire Rope,Quiet Operated Rope,Torque Balanced Rope
Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com