High quality coil , solenoid valve port thread in china for air compressor parts
Â
High quality  coil , solenoid valve port thread  in chinaÂ
Size: G1/4, G1/2, G3/4, 1Â inch, 2Â inch, 3Â inch and others
Voltage: 12V, 24V, 220V and others
Operation method: normally closed, normally open
Type: 2Â way, 3Â way and others
| Characteristic |
1.pilot operated diaphragm structure with less power   comsumption for  long time working |
| 2.Applied to pressure system opened from 0.03 Mpa | |
| 3.Life span can be over 1Â million times | |
| Medium | Air, water etc. |
| Temperature | NBR:   -10°C to 80 °C |
| EPDM: -10°C to 120 °C | |
| VITON:-10°C to 150 °C | |
| Pressure | 0.03-1.6Mpa |
| Port size | 3/8'-1' |
| Port thread | G.BSPT,BSP,NPT,PT |
| Orifice | 12,15,20,25mm |
| Voltage | DC-12V,24V |
| AC-24V,120V,240V/60HZ,110V,220V/50HZ | |
| Tolerance | ±10% |
| Coils | 9VA(AC),6W(DC) IP 65,100% ED |
| ,22VA(AC),17W(DC) IP65,100% ED | |
| Special coils | Latching coil:DC6-24V as requested |
| Material | Body- brass or stainless steel |
| Seal- NBR,EPDM,VITON | |
| Amature tube-stainless steel 304 | |
| Plunger-stainless steel430F | |
| Stop-stainless steel 430F | |
| Springs-SS304 | |
| Shading rings- stainless steel 304 |
Â
Company information
Â
Â
Hongkong Fengguang Industry Limited was established in 2000, located in Chang'an town,
Dongguan city-- "China National Machinery and Hardware town"
We're a Hi-Tech company specialize in research, development, manufacture andÂ
distribution of air compressor sparts. With our rich experience, profession technology
and rigorous quality control, our products are widely used in air compressor fieldÂ
with good feedback and continuous orders from more than 2,000 customers in domestic
and oversea market.We can solve any technical problems you may encounter
with your air compressor and provide many kinds of air compressor parts for you.
Â
Â
Â
Main products:
Services kits:unloading valve kits, Minimum pressure valve kit,
Stop oil valve kit, check valve kit, thermostat valve kit and more
Valve assembly:air intake valve, thermostat valve, solenoid valve, minimum pressure valve kit, blow off valve, drain valve and more
Rubber parts: hose, coupling, elbow, anti-vibration pad, housing, belt
Sensor: temperature sensor, pressure sensor, oil level sensor
Other parts: gear wheel, controller, temperature switch, pressure switch, cleaning agent
FAQ
Â
Â
Q1: Are you factory or trade company? Â
A1:We are factory.
Q2:Â What the exactly address of your factory?Â
A2: Our head office is located in 2F Xingshun Technology Park, Chongtou community,Chang'an, Dongguan City Guangdong Province,china.
And our factory is located in Area B,Industry Zone,Lian hua County, Pingxiang City, Jiangxi Porvince, China. (That is our boss's hometown)
Q3:Â Warranty terms of your machine?Â
A3: One year warranty for the machine and technical support according to your needs.
Q4:Â Will you provide some spare parts of the machines?Â
A4: Yes, of course. we can provide all spare parts for the machines
Q5:Â How long will you take to arrange production?Â
A5:380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 14-18days
Q6:Â Can you accept OEM orders?Â
A6: Yes, with professional design team, OEM orders are highly welcome.
Emily Tian
*****************************************Â
Hongkong Fengguang Industry LtdÂ
Mob:+86-15992782410
 Â
 Â
Web:www.fgparts.com
Â
High quality coil , solenoid valve port thread in china for air compressor parts
Â
High quality  coil , solenoid valve port thread  in chinaÂ
Size: G1/4, G1/2, G3/4, 1Â inch, 2Â inch, 3Â inch and others
Voltage: 12V, 24V, 220V and others
Operation method: normally closed, normally open
Type: 2Â way, 3Â way and others
| Characteristic |
1.pilot operated diaphragm structure with less power   comsumption for  long time working |
| 2.Applied to pressure system opened from 0.03 Mpa | |
| 3.Life span can be over 1Â million times | |
| Medium | Air, water etc. |
| Temperature | NBR:   -10°C to 80 °C |
| EPDM: -10°C to 120 °C | |
| VITON:-10°C to 150 °C | |
| Pressure | 0.03-1.6Mpa |
| Port size | 3/8'-1' |
| Port thread | G.BSPT,BSP,NPT,PT |
| Orifice | 12,15,20,25mm |
| Voltage | DC-12V,24V |
| AC-24V,120V,240V/60HZ,110V,220V/50HZ | |
| Tolerance | ±10% |
| Coils | 9VA(AC),6W(DC) IP 65,100% ED |
| ,22VA(AC),17W(DC) IP65,100% ED | |
| Special coils | Latching coil:DC6-24V as requested |
| Material | Body- brass or stainless steel |
| Seal- NBR,EPDM,VITON | |
| Amature tube-stainless steel 304 | |
| Plunger-stainless steel430F | |
| Stop-stainless steel 430F | |
| Springs-SS304 | |
| Shading rings- stainless steel 304 |
Â
Company information
Â
Â
Hongkong Fengguang Industry Limited was established in 2000, located in Chang'an town,
Dongguan city-- "China National Machinery and Hardware town"
We're a Hi-Tech company specialize in research, development, manufacture andÂ
distribution of air compressor sparts. With our rich experience, profession technology
and rigorous quality control, our products are widely used in air compressor fieldÂ
with good feedback and continuous orders from more than 2,000 customers in domestic
and oversea market.We can solve any technical problems you may encounter
with your air compressor and provide many kinds of air compressor parts for you.
Â
Â
Â
Main products:
Services kits:unloading valve kits, Minimum pressure valve kit,
Stop oil valve kit, check valve kit, thermostat valve kit and more
Valve assembly:air intake valve, thermostat valve, solenoid valve, minimum pressure valve kit, blow off valve, drain valve and more
Rubber parts: hose, coupling, elbow, anti-vibration pad, housing, belt
Sensor: temperature sensor, pressure sensor, oil level sensor
Other parts: gear wheel, controller, temperature switch, pressure switch, cleaning agent
FAQ
Â
Â
Q1: Are you factory or trade company? Â
A1:We are factory.
Q2:Â What the exactly address of your factory?Â
A2: Our head office is located in 2F Xingshun Technology Park, Chongtou community,Chang'an, Dongguan City Guangdong Province,china.
And our factory is located in Area B,Industry Zone,Lian hua County, Pingxiang City, Jiangxi Porvince, China. (That is our boss's hometown)
Q3:Â Warranty terms of your machine?Â
A3: One year warranty for the machine and technical support according to your needs.
Q4:Â Will you provide some spare parts of the machines?Â
A4: Yes, of course. we can provide all spare parts for the machines
Q5:Â How long will you take to arrange production?Â
A5:380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 14-18days
Q6:Â Can you accept OEM orders?Â
A6: Yes, with professional design team, OEM orders are highly welcome.
Emily Tian
*****************************************Â
Hongkong Fengguang Industry LtdÂ
Mob:+86-15992782410
 Â
 Â
Web:www.fgparts.com
Â
Precision Roll Forming Machine
Precision Roll Forming Machines aim to solve complicated profiles forming, e.g. electric cabinet frames, crane rails, noise shield panel, automobile window frame, train floor deck, stereo parking panel, door frame, etc. The precision roll forming line don't only solve complex roll forming in high precision, but also make progressive punching online. In a word, high technology of roll forming is embodied in precision Roll Forming Machine.
We don't only be able to make the precision roll forming machine, but also attend machine making cost, therefore, our roll former is competitive in technology and price. We aim to give a complete comprehensive solution of precision roll forming, welcome your consultation!
Precision Roll Forming Machine,High Precision Deck Machine,High Precision Roll Forming Machine,Upright Rolling Machine
Wuxi Jinye Complete Set of Equipment Co.Ltd. , https://www.machinejinye.com