Plastic Extruder Machine Single Extruder Screw and Barrel

  • Screw: Single-Screw
  • Material: Nitriding Steel
  • Nitrided Hardness: HRC56-58
  • Specification: ISO 9001: 2008 approved
  • HS Code: 84779000
  • Size: Customize
  • Nitrided Layer Depth: 0.5-0.8mm
  • Trademark: ZHONGYANG
  • Origin: China
Plastic Extruder Machine Single Extruder Screw and Barrel

Screw Diameter: Ø 15- Ø 300
L/D ratio: 15-46

Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc.

Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
(3)4Cr5MoSi V1 (JIS SKD-61)
(4)9Cr18MOV
(5)HPT

Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide

Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting

Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm

Warranty and service: 1 year.
Focus on quality and service.
Experienced manufacturer, we will be the best choice.

Angle Cutting Band Sawing Machine

Bandsaw Machine,Band Sawing Machine,Metal Vertical Band Saw,Portable Metal Cutting Band Saw

Zhejiang Hujin Machine Tool Co., Ltd. , https://www.hujinmachine.com

Posted on