Pz Vertical Gravity Bottom Discharge Centrifuge

Model NO.: PZ Model
Condition: New
Trademark: Huaxiang
Transport Package: Wooden Case
Origin: China
HS Code: 842119100
Model NO.: PZ Model
Condition: New
Trademark: Huaxiang
Transport Package: Wooden Case
Origin: China
HS Code: 842119100
Name:PZ bottom discharge centrifuge
Other Name:Bottom centrifuge
Selling Point:simple structure, convenient operation, continuous operation,automatic operation
Simple Description:  
  1. Vertical Bottom discharge
  2. Liquid damping isolators, no installation foundation
  3. Independent bearing seat, large bearing support span, low basket gravity center, larger carrying capacity
  4. Fully-automatic operation program control
  5. Automatic operation, continuous operation
  6. Excellent dehydrating performance
  7. Stable running even when the flow changes
  8. No damage on article
Detailed Description:
Properties and uses:
  1. It can be used to dehydrate the large articles over than 2mm, as well as to apart all kinds suspension that was difficult to separate. The grains are discharged automatic and will not be broken at random
Operating principle
  1. The automatic bottom discharge scraper centrifuge is vertical fully-automatic filtration centrifuge. The motor drives the drum to rotate at high speed through the belt, and under the control of pre-written program, the material to be separated is fed into the drum through the feed system. After the material is filtered through the filtration medium ( filter cloth/screen) under the action of centrifugal force, the liquid phase discharges out of the centrifuge through the liquid pipeline, and the solid phase is retained in the drum. Once separation cycle is complete, the drum upraise and all articles are discharged by itself based on its gravity.
Main Characteristics
  1. Novelty structure, convenient operation and maintenance.
  2. Adopts with big cover structure, convenient to discharge the material and thoroughly was the space between the shell and drum.
  3. The lid is quipped with a mechanical balancer, it is less labor cost and needs no energy.
  4. No dead angle exists and completely transited smoothly, an optional washing effect can be achieved with a CIP cleaning system
  5. Grains can be well preserved
Special Allocation
  1. Cleaning and spraying system
  2. PLC program control
  3. Hydraulic action system
  4. No basic form(equipped with vibration isolation chassis +vibration damper).
  5. The corresponding stainless steel(SUS304,321,316L,or titanium) is adopted according to anticorrosive requirements for users' materials to be separated.
Product Parameter:
 
Item Models
PZ800 PZ1000 PZ1250 PZ1600
Drum Diameter (mm) 800 1000 1250 1600
Drum volume (L) 100 150 305 425
Loading limit(kg) 140 200 400 600
Drum speed(r/min) 1200 1000 900 600
Separation factor 645 560 567 302
Motor power(kw) 7.5 11 30 37
Overall Weight 1800 2000 4000 5000
Physical size(mm) 1800X1250X1450 2050X1500X1700 2400X1740X2180 3000X2200X2900





  Name:PZ bottom discharge centrifuge
Other Name:Bottom centrifuge
Selling Point:simple structure, convenient operation, continuous operation,automatic operation
Simple Description:  
  1. Vertical Bottom discharge
  2. Liquid damping isolators, no installation foundation
  3. Independent bearing seat, large bearing support span, low basket gravity center, larger carrying capacity
  4. Fully-automatic operation program control
  5. Automatic operation, continuous operation
  6. Excellent dehydrating performance
  7. Stable running even when the flow changes
  8. No damage on article
Detailed Description:
Properties and uses:
  1. It can be used to dehydrate the large articles over than 2mm, as well as to apart all kinds suspension that was difficult to separate. The grains are discharged automatic and will not be broken at random
Operating principle
  1. The automatic bottom discharge scraper centrifuge is vertical fully-automatic filtration centrifuge. The motor drives the drum to rotate at high speed through the belt, and under the control of pre-written program, the material to be separated is fed into the drum through the feed system. After the material is filtered through the filtration medium ( filter cloth/screen) under the action of centrifugal force, the liquid phase discharges out of the centrifuge through the liquid pipeline, and the solid phase is retained in the drum. Once separation cycle is complete, the drum upraise and all articles are discharged by itself based on its gravity.
Main Characteristics
  1. Novelty structure, convenient operation and maintenance.
  2. Adopts with big cover structure, convenient to discharge the material and thoroughly was the space between the shell and drum.
  3. The lid is quipped with a mechanical balancer, it is less labor cost and needs no energy.
  4. No dead angle exists and completely transited smoothly, an optional washing effect can be achieved with a CIP cleaning system
  5. Grains can be well preserved
Special Allocation
  1. Cleaning and spraying system
  2. PLC program control
  3. Hydraulic action system
  4. No basic form(equipped with vibration isolation chassis +vibration damper).
  5. The corresponding stainless steel(SUS304,321,316L,or titanium) is adopted according to anticorrosive requirements for users' materials to be separated.
Product Parameter:
 
Item Models
PZ800 PZ1000 PZ1250 PZ1600
Drum Diameter (mm) 800 1000 1250 1600
Drum volume (L) 100 150 305 425
Loading limit(kg) 140 200 400 600
Drum speed(r/min) 1200 1000 900 600
Separation factor 645 560 567 302
Motor power(kw) 7.5 11 30 37
Overall Weight 1800 2000 4000 5000
Physical size(mm) 1800X1250X1450 2050X1500X1700 2400X1740X2180 3000X2200X2900





 

316 Stainless Steel Cut Wire Shot

Longlived 316 stainless steel Cut Wire Shot are all produced through German craftsmanship with bright, defect-free and pollution-free material. After strict processing like heat treating, wire drawing, electronic spiral cutting, passivation molding and other processes, our products are strictly in a accordance with German Spring Association standard VDFI8001, German industrial standards DIN8201 and American Aerospace Material Specification Standard. It is widely used for surface shot blasting, sand blasting and shot blasting of stainless steel parts, aluminum alloy die castings, and copper alloy parts. According to different composition, stainless steel is classfied several grades such as 304, 410, 430, 201 and 316 stainless steel cut wire shot is the most popular abrasive of them as its excellent performance. The composition of 316 stainless steeel is: C≤0.08, Cr 16.00-18.50, Ni 10.00-14.00, Mn ≤2, P≤0.035, S≤0.030, Mo 2.00-3.00, Si≤1.00. So you can check if 316 Stainless Steel Shot could meet your requirement. Generally 316 stainless tseel cut wire shot could be classfied two kinds. One is as cut and the other is conditioned. Compared with as cut one, conditioned is without sharpe edges and corners and has near round shape. According to this, you can choose the more suitable one.

316 Stainless Steel Cut Wire Shot,Sus316 Stainless Steel Cut Wire Shot,Ss316 Stainless Steel Shot,Bulk Stainless Steel Shot

Longlived Metal Products Co ., Ltd , https://www.stainlesssteelshotcn.com

Posted on