This type machines are very popular type. It is the high speed type roll forming machine.
1:Main parameter of metal roofing sheet shape color steel tile roll forming machineÂ
| 1 | Suitable material | PPGI,PPGL,GI,GL |
| 2 | Main motor power | 5.5KW with Hydraulic motor |
| 3 | Cutting type | Stop cutting |
| 4 | Meterial Thickness | 0.2-1.0mm |
| 5 | Shaft stations | 18 rows |
| 6 | Shaft material | 45# steel with tempering. |
| 7 | Voltage | 380V 3phase 50HZ or as your need |
| 8 | Roller material | 45# steel with chromeplating |
| 9 | Plating thickness | 0.05mm |
| 10 | Drive type | Hydraulic motor |
| 11 | Frame | 300 H steel |
| 12 | Middle panel | 14mm |
2:Please see the details machine pictures:(Hydraulic motor:Speed can reach to 25M/Min,Other company machines' speed is 8-10M/Min.)
Strong middle panel wall for steady and Best cutting material: Cr12 with heating treatment. Hardness:60-62degree.
3:Other type machines may you like:
4:Advantage:
21 years wealth experience.
Exported to more than 30 countries.
We can design according to clients' need.
We are different from others:Good quality machines are from good quality parts:
5:Company profile:
6:Other machines may you need:
7:FAQ:
1. Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
2. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep your business running.
3. How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi(1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
4. How to get a quotation?
a. Give me the profile drawing and thickness, this is the important. If no,I will suggest you some.
b. Other specific requirements are welcome, such as the speed, power and voltage you want.
5. What can you do if the machine broken?
Our machine's warranty period is 12months! If the broken parts can't repair, we can send the new parts replace the broken parts free. If after warranty period,we can through negotiation for to solve the problems, and we supply the technical support for the whole life of the equipment.
6. Can you be responsible for transport?
Yes, please tell me the destination port or address. We have rich experience in transport.
7. You are trade company or factory?
We are factory. Welcome to our workshop for visiting.
8. How long the machine could be made?
Normally speaking, common roof profile roll forming machine could be made within 45 working days.
If you need machines in a hurry, we can make it for you less than a month.
8:If need more machine pictures or videos,welcome to contact with me.
Â
PC Hollow Sheet Line is applicable to produce PC,PP,PE hollow profile board. The products is used widely for building, decorating, advertisement laying, road noise isolation ,roofing and packing. PP hollow profile board can instead of carton which have feature like light weight, high strengthen, moisture-proof, antisepsis.
Machine part detailed introduction of PC hollow sheet production line/PE hollow sheet production line /PP hollow sheet production line
1. The vacuum calibrator featured with wear-resistance, dirty free and the lifting, falling and leveling for the forming plates is much easier to be controlled.
2. High speed screw, low energy consumption with high rotation speed to match gear pump and stable pressure; output capacity is 25% higher than other brand extrusion lines. because of special design of forming plates.
3. Special designed cooling system for all section of forming plates, and unique designed vacuum system for each section of forming plate.
4. Special designed temperature control oven with cross heat shrink forming, which is much easier to be controlled than other brand extrusion lines.
5. The softness of pull rolls could be customized on request to extend its stretch.
6. The air capacity of hollow sheet and low pressure could be adjusted and controlled slightly, which is easily to be controlled than any other brand extrusion lines.
7. Unique T-Die made by JC Times is specially designed for PP hollow sheet. The thickness of hollow sheet could be from 2mm to 10 mm with twin-wall. The ribbed between walls could be rectangular and diagonal shape.
8. Anti-UV co-extrusion layer could be one sided or two sided, outer surfaces could be sandy or glossy according to configuration requirement.High percentage of recycled flakes could be mixed with the virgin materials.
Pc Hollow Sheet Line,Pc Hollow Sheet Machine,pc hollow sheet extrusion machine,pc pp hollow grid sheet production line
zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstars-machineries.com