Catain One Step Tyre Sealant & Inflator

Model NO.: ID-309
HS Code: 35069190
Model NO.: ID-309
HS Code: 35069190
Catain One Step Tyre Sealant & Inflator
Catain One Step Tyre Sealant & Inflator
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.

Uses:
Just connect, inflate & go! !
Catain One Step Tyre Sealant & Inflator
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.

Catain One Step Tyre Sealant & Inflator
Catain One Step Tyre Sealant & Inflator
Catain One Step Tyre Sealant & Inflator
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.

Uses:
Just connect, inflate & go! !
Catain One Step Tyre Sealant & Inflator
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.

Catain One Step Tyre Sealant & Inflator

Six-axis Robot

Six Axis Robot,Robot Manipulator,Small Six Axis Robot,Mobile Manipulator Robot

Foshan Youngmax Machine Co.LTD , https://www.ymaxmachine.com

Posted on