Screw Barrel for PE Injection Molding Machine Best Quality

HS Code: 84779000
HS Code: 84779000
Production Description

Technical Index:
Depth of Nitrated Layer:0.5~0.8mm
Hardness of nitration: 950~1100Hv
Fragility of nitration: Less than grade 1
Surface Hardness of Nitrated Cr coating layer: 950Hv
Hardness of Bimetallic Layer: HRC55~72
Thickness of Cr-coating Layer: 0.03~0.08mm
Depth of Bimetallic Layer:>2mm

Material :quality alloy steels

1.38CRMOALA
2.SKD61
3.stainless steel
4. Bimetallic 

Supply Capacity:
Production Capacity: 1500 sets/month 
Packing: Fumigation wooden case 
Delivery Date: 30~40 days

The product specification

Screw: 15 mm in diameter-250 mm diameter screw

Screw length: 300 mm to 8000 mm screw length

Machine tube diameter 40 mm to 400 mm: barrel outer diameter

Length-diameter ratio: L/D: 10-46



Product Display
Screw Barrel for PE Injection Molding Machine Best Quality



Screw Barrel for PE Injection Molding Machine Best Quality


Equipment Display
Screw Barrel for PE Injection Molding Machine Best Quality



Packing&Delivery
Screw Barrel for PE Injection Molding Machine Best Quality



Contact Us
Screw Barrel for PE Injection Molding Machine Best Quality



 

Production Description

Technical Index:
Depth of Nitrated Layer:0.5~0.8mm
Hardness of nitration: 950~1100Hv
Fragility of nitration: Less than grade 1
Surface Hardness of Nitrated Cr coating layer: 950Hv
Hardness of Bimetallic Layer: HRC55~72
Thickness of Cr-coating Layer: 0.03~0.08mm
Depth of Bimetallic Layer:>2mm

Material :quality alloy steels

1.38CRMOALA
2.SKD61
3.stainless steel
4. Bimetallic 

Supply Capacity:
Production Capacity: 1500 sets/month 
Packing: Fumigation wooden case 
Delivery Date: 30~40 days

The product specification

Screw: 15 mm in diameter-250 mm diameter screw

Screw length: 300 mm to 8000 mm screw length

Machine tube diameter 40 mm to 400 mm: barrel outer diameter

Length-diameter ratio: L/D: 10-46



Product Display
Screw Barrel for PE Injection Molding Machine Best Quality



Screw Barrel for PE Injection Molding Machine Best Quality


Equipment Display
Screw Barrel for PE Injection Molding Machine Best Quality



Packing&Delivery
Screw Barrel for PE Injection Molding Machine Best Quality



Contact Us
Screw Barrel for PE Injection Molding Machine Best Quality



 

Polyester Hot-rolled Non-woven Fabric Production Line

The polyester non-woven fabric production line is made of PET (polyethylene terephthalate) chip raw material, using chip spinning process route, air drafting device and rotary swing plate technology to produce filament needle punched non-woven fabric. The design adopts advanced technology, uses the collected data, digests and absorbs to design a filament needle punched non-woven fabric workshop. Non-woven fabrics with a width of 6.8 meters, with an annual output of 5,500 tons, using spunbond needle punching production lines.

Non-woven equipment, polyester spunbond non-woven equipment, polyester non-woven production line, polyester (PET) thermobonded non-woven production machinery,Polyester (PET) hot-rolled non-woven fabric production machinery

Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.czsmmsmachine.com

Posted on