The forklift manufacturer tells you how to prevent the forklift from malfunctioning.
The method of prevention. According to the manufacturer's rules, establish a life list of parts and components; each forklift sets up a statistical table of the use of parts, and records the various parts of the consumables, the hours of operation of the forklift, etc., and compares them with the life table. In case of extreme working time, replace it in time.
Human error. For example, when the carburetor is maintained, the spring washer is dropped into the intake pipe, causing the piston to be abolished; the anti-freezing water is loose, causing the oil sump to enter the water; if the repair is accidentally, the crankshaft timing gear is bumped by the object, presenting A bulge, the bulge against the timing gear on the camshaft caused an abnormal noise in the engine. The seal ring device on the valve guide improperly caused the exhaust pipe to smash the oil; if the abnormal sound was not adopted, the shaft was scrapped; the connecting rod bolt was too tight and damaged, causing the engine cylinder to be invalid.
Anti-leakage method. Carefully dispose of all kinds of pads. Such as oil pan or valve cover, because of the large touch area, it is not easy to compact, and simply forms oil leakage. The oil leaks from the oil seal at the rear of the crankshaft, and the oil will enter the clutch, which will bother the oil and cause the clutch plate to slip and burn. Or repair the main bearing in time. When the cooperation gap between the main bearing and the journal is too large, the front and rear oil seals will lose the sealing due to the impact effect of the crankshaft, forming oil leakage from the crankshaft head or oil leakage into the clutch, and then polluting the friction plate to cause slippage and failure of operation.
Round Open Water Cooling Tower
The whole structure is solid and light;the body and water pond is manufactured with reinforced glass fibre (FRP glass fiber reinforced plastics),never being corrosive. The surface finish is added with ultraviolet inhibitor,which can resist sunshine attack and damage.
All steel and iron material is processed through galvanizing by dipping,Ocorrosion resisting and durable.
Special designed axial-flow type air blower applies belt reduction gear,reducing low noise and sufficient wind; tailor-made water-drop noise
reduction carpet to eliminate water sound.
Apply special design PVC water block curtain (water-stop) to prevents plashing) remarkably; pressure drop loss is slight and splashing loss i under 0.001%.
Special designed water sprinkler with big bore diameter,which won' t cause blocking but the sprinkling effect is very good. It is installed in the tower,so it won' t bee polluted by outside dust and foreign matters.
Apply cellular vacuum molding heat dissipation material, stagger arrangement surface has grooves and the heat exchange effect is especially good.
Water pond applies slant design, easy to wash, containing less water; the operating weight is lower, but the water tank is very big, so it won't absorb air.
The cooling tower support is light and solid, convenient to assembly no matter there is suspension iron rack or not.
Round Open Water Cooling Tower,Water Cooling Tower,Round Cooling Tower,Cool Water Towers
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com