Tube Fin Type Air Cooled Condenser (4R-6T-2200)

Tube Fin Type Air Cooled Condenser 

The technology to create perfection:
1. The fins produced are of very high standard of quality having flare position made of plain,
Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.

Condenser Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8- 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing
Note: For further information please contact us
Condenser Pictures:

Used for vehicle and vessel etc transportation devices  Tube Fin Type Air Cooled Condenser 

The technology to create perfection:
1. The fins produced are of very high standard of quality having flare position made of plain,
Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.

Condenser Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8- 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing
Note: For further information please contact us
Condenser Pictures:

Used for vehicle and vessel etc transportation devices 

Precast Concrete Batching Plants

Features of concrete batching plant

The overall steel structure of the mixing station is made of high-quality steel, which has high overall structural strength and strong stability.The mixing machine adopts the twin-shaft forced mixing main machine, which has strong mixing performance, uniform mixing and high productivity.Excellent pneumatic components, electrical components, etc.; to ensure the reliability of the equipment, accurate metering performance.Each maintenance and repair site is provided with a walking platform or a check ladder, and has sufficient operation space.

Precast Concrete Batching Plants,Belt Conveyor Concrete Plant,Cement And Concrete Mixing Plants,Concrete Batching Plant

Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.zeyumixer.com