Recently, GE announced that it will cooperate with the Carnival Group to upgrade the propulsion control system of the "Dawn Princess" cruise ship. The new control system after the upgrade will reduce the installation cost, while enhancing redundancy and improving operational safety.
It is reported that the "Dawn Princess" is 856 feet long and has a tonnage of 77,441 tons. It is reported that this is not the first time GE has provided propulsion technology for the "Dawn Princess". As early as 1993, GE will supply the ship with the Syconum digital control system. Today, GE's Ship Solutions division will provide the ship with the latest generation of PECe digital control systems.
Mr. Greg Jackson, an Australian P&O ship under the Carnival Company, said, “GE is our long-term partner. In the past, we have cooperated with many ship projects. We are deeply impressed by the quality of GE's solutions and the new propulsion control system for GE. Full of confidence, in line with our high standards."
GE will use the real-time simulator at its Belfort Center of Excellence in France to conduct extensive shop trials of the control system, allowing the entire upgrade installation to be completed within 12 days of the dry dock.
During the upgrade, the Visor remote controller will also be upgraded to provide better diagnostics, help troubleshoot remotely, and reduce unplanned downtime. At the same time, GE will provide technical assistance for the first voyage after the dry dock.
Silicone Rubber Mould
Silicone mould is a special mold for making crafts. According to performance, the raw materials of glue can be divided into ordinary silicone and weather silicone. The characteristics of silicone are high temperature resistance, corrosion resistance, strong tear resistance, high simulation precision, and it is used to make various handicrafts mold.
Mold should be made in time after the silicone is matched. Pour the glue on the highest part of the mold in a trickle, let it flow naturally, brush it in place with an oil paintbrush where the flow is not in place, if it is a piece of silicone, not only fill the entire product, but also brush the glue evenly. Each product should be brushed with at least three layers of silicone. The thickness of each layer of silicone is 1mm. In the process of brushing the silicone, each layer is required to be cured before the other layer can be brushed. When brushing the third layer, add one layer on top of the second layer. The thickness of the silica gel part of the whole mold is controlled in 3-4mm according to the different requirements of the size of the product, and the width is not greater than 60 mm of the product width. The time for the silicone to set is 20 minutes.
Silicone Injection Molding, Moulding Silicone, Rubber Molds, Rubber Mold Making
Sung Precision Mould & Plastic Co., Ltd. , https://www.injectionmoldingfactorys.com
