The dump truck is a special vehicle that drives the hydraulic lifting structure through its own power. It can be seen in the mining site of the mine, mainly used for the loading and unloading of ore and sand, and is indispensable for large-scale projects. helper. The front lift dump truck has many features such as the loading of goods and a wide range of applications. Therefore, it has been increasing year by year in the market share of China and has become a hot-selling special vehicle. However, in the process of use, some owners report to the manufacturers that when the goods are being lifted, sometimes there will be cases where the cars will fall back. Today we will do some analysis on this phenomenon.
Front lift lift trucks are suitable for some sanitation garbage and sand and earth cinders used in construction projects, in which ore cargo is not more than 200 mm in diameter, but it is relatively easy to fall back when transporting clay and other difficult dumping goods. . Most of the cylinder drop occurs in the following situations: The first one, the fall phenomenon is mostly not filled with heavy cargo, but this phenomenon will not occur when the empty vehicle is lifted; The second one, when it came down, most of the carriages were cargoes with strong adhesion, such as clay and silt, when the cylinders were lifted to the 34th. The cargo still stays at the front end of the carriage, causing the cylinder to fall back on its own. The third one, when the fall occurs, just adjust the manual reversing valve to the neutral stop position to prevent the cylinder from continuing to fall, indicating that the cylinder is only falling back. Occasionally, it is not frequent.
So how do you avoid falling down? Is there any good way to avoid it, because it will hurt the car itself to some extent. Here are some suggestions for manufacturers of fuel tanks: 1. As a manufacturer, we must maintain good communication with customers. When problems are encountered, we must send people to solve them in time, and regard customer needs as our greatest pursuit. This can guarantee the brand's credibility and praise. 2. Continuously strengthen the R&D and investment in the technology of cylinders, and gradually increase the load on the cylinders, so that the weight that can be lifted by the cylinders will continue to increase. 3. Strengthen the basic inspection of the cylinder when it leaves the factory, and strive to achieve the long service life of the products that the manufacturers go out.
Cutting Fork Type Aerial Working Platform
Cutting Fork Type Aerial Working Platform,Electric Slab Scissor Lift,Aerial Working Platform Truck,High Altitude Aerial Working Platform
Porema (Suzhou) Logistics Machinery and Equipment Co., LTD , https://www.jsporema.com