Pay attention to the following when installing the jaw crusher :
1. Since the jaw crusher has a large vibration during operation, the machine should be installed on the concrete foundation. In order to reduce the vibration, noise and the impact on the foundation of the nearby building and structure, a hardwood mat is placed between the crusher and the concrete foundation. Plate, rubber band or other shock absorbing material.
2, the base of discharge grooves for laying a layer of metal plate, and has a sufficient inclination angle (depending on the flow of materials to be determined, not less than 50 °), so as not to hinder the smooth discharge of the crushed product.
3. The size of the discharge opening should be adjusted according to the required product size. When adjusting, loosen the T-row bolt and tension spring. Use the top bolt to open the adjusting seat, insert or withdraw the gasket of the corresponding thickness, and then retract the lifting bolt. Adjust the seat under the action of the weight of the moving jaw, and close it to the bracket ear seat, and press the gasket. Get together. Thereafter, adjust the spring preload to ensure that the thrust plate and the thrust plate pad fit snugly when the machine is in operation. However, the pre-pressure should not be too large, as long as no knocking sound occurs, and finally the adjustment seat is locked.
Silver Polishing Machine,Silver Chains Polishing,Jewellery Polishing Machines,Gold Silver Polishing Machine
Dongguan Bayi Automation Equipment Co., Ltd , https://www.bayipolisher.com