The rainy weather in summer is a headache, especially for car owners who have car owners. If they don’t pay attention, they will turn the car into a soaking car. The internal handling of the cabin is even more troublesome. Because of these issues, we must pay attention to the following six major issues in the rainy days:
1. Clean the windshield to maintain a good vision. In the rain we need to slow down, we must turn on the wiper in time. Turn on the low beam when the weather turns dark. Once there is zero on the glass, we need to turn on the air-conditioning to blow away the cold air. If there is zero gas on the glass, we must remove the heater as soon as possible.
2. Prevent slippery roads. We all know that in rainy weather, the road is not very easy to drive. It can degrade the system's functional capabilities and also cause rollovers. Therefore, in the face of this situation, we must control the steering wheel with both hands, pay attention to the driving route in front of us, maintain good speed, and we must gently brake at the transition. Prevent vehicles from slipping.
3. Hang the lowest gear and go slowly. Drivers with many years of driving experience know that regardless of whether the road is good or bad, or driving in the rain, we must always observe the distance between our own vehicles and other vehicles in order to be prepared for the emergency. If we need to stop, we need to reduce the speed of the car 110 meters in advance, and then slowly step on the brakes to give enough emergency preparation to the car behind.
4. Prevent vehicles from falling into the water. When our vehicle encounters a place where there is standing water, we first get off the car to see the depth of the water. If the depth of water exceeds the exhaust pipe, if we drive, we will cause the vehicle to turn off directly. Don't be tough on the road surface. . Once you increase the intensity of tough driving will cause the engine to enter the water directly.
5. Remember that you must not start the vehicle immediately after the engine stalls. Because the vehicle is afraid of water entering the combustion chamber during startup. Once you enter the water, it will directly cause damage to the engine's connecting rod and other parts.
6. Pay attention to the neighboring car. Everyone must be careful not to get too close to the vehicle next to them, especially large vehicles. First, it will block our sight, and second, we may not be able to cross the surface of the road where the cart can go. Once we encounter a place with water, our car will suffer.
Injection Molds,Injection Molding Part,Plastic Molding Injection,Plastic Injection Moulds
Shenzhen Yuheng Precision Machinery Co., Ltd. , https://www.ypcncmachining.com