F1 tire supplier Pirelli has launched a pair of aggressive tyres for soft tyres and medium tyres at the Belgian station this weekend. They hope that the addition of soft tyres will make the competition more unpredictable, even if the last one has a chance to stage a big turn. Good play. And this formula has never been used at Spa in the past two years.
Pirelli hopes that this week's tire tactics will add more overtaking and accidents to the game, so they offer a mix of soft and medium tires this week. The combination of these two tires has never appeared on the Spa track in the past two years. Last year, the match between the neutral tire and the hard tire was used.
According to the analysis of Pirelli's sports director Hambri, the drivers will definitely use the soft tires for the qualifying competition. Considering the length and characteristics of the Spa, it is possible to leave the soft tires in the tire tactics. More manipulation space.
Pirelli's director has a special liking for Spa: "Spa is a place of extraordinary epic in the annual calendar. We are all familiar with this track, and it is also held 24 times a year. Known for the endurance race. It is very important to use a tire suitable for racing. The width of this track can be fully utilized, and the weather changes on the track are also opportunities for people to grasp."
Hambri believes that controlling tire consumption is also a key factor: “Spa is a very expensive track for tires. This is the first time we have used soft tyres on this track since 2011. Compared to a slightly harder neutral tire, the soft tyre allows the driver to get better results in qualifying."
In the end, Hambor hopes that the game will be more exciting because of the different tire tactics: "Because of the length of the track, this also means that the use of tire tactics played a decisive role in the Spa, at the right time. Changing tires is more effective than playing on other tracks. As long as you seize the opportunity, even the last one can kill the first place, so that you can present a wonderful Grand Prix for everyone."
Polymer leaf disc filter is also called disc filter element, used for high viscosity melt filtration. The disc filter design maximizes the effective filtration area per cubic meter, realizing the efficient utilization of space and miniaturization of filtration devices. The main material is stainless steel sintering felt or multilayer stainless steel sintered wire mesh.
Features: filter element bear the pressure equably, stable filtration performance, can be repeatedly cleaned, long service .
Polymer leaf disc filter is divided into two kinds, according to the material is divided into: stainless steel sintering felt, stainless steel sintered wire mesh; According to the structure: hard and soft. Among the above types, stainless steel sintered mesh filter material has the greatest advantages of high strength and impact resistance, and sintered felt has the advantages of long service cycle and good air permeability.
Application
1,BOPP bidirectional stretch polypropylene film
2,BOPA bidirectional stretch nylon film
3,BOPET bidirectional stretch polyester film
4, high viscosity melt filtration
5, chemical fiber liquid filtration
Polymer Leaf Disc Filter ,BOPET Film Disc Filter ,SS316 Polymer Leaf Disc Filter,Polymer Filter Element
Suzhou Haoxiang Screen Stencil Products Co.,Ltd , https://www.shaiwanghaoxiang.com