API 6A Hydraulic Choke Valve

Valve needle and spool are made of tungsten carbide, with sufficient corrosion resistant, anti-eroding an wearable capacity.
The two kinds of adjustable and external sleeve type could apply to wellheads&X-mass tree and choke manifold.
Features:
The coupling nut used for connecting the bonnet and body allows fast make-up and break-out;
Stem tip and bean adapter are fabricated from special carbide alloys for corrosion and abrasion resistance;
Indicator lens with scale marks allows the operator to know stem's position and actual orifice area;
Turn hand wheel counter-clockwise and the valve will open;turn hand wheel clockwise and the valve will close;
Main technical date:
Working pressure: 2000~20000PSI
Nominal bore: 2-1/16"~7-1/16"
Working temp: P~U
Product specification level: PSL1~4
Performance requirement: PR1~2
Material class: AA~FF
Working medium: crude oil, natural gas, drilling fluid

                                                                      


                                            

  Valve needle and spool are made of tungsten carbide, with sufficient corrosion resistant, anti-eroding an wearable capacity.
The two kinds of adjustable and external sleeve type could apply to wellheads&X-mass tree and choke manifold.
Features:
The coupling nut used for connecting the bonnet and body allows fast make-up and break-out;
Stem tip and bean adapter are fabricated from special carbide alloys for corrosion and abrasion resistance;
Indicator lens with scale marks allows the operator to know stem's position and actual orifice area;
Turn hand wheel counter-clockwise and the valve will open;turn hand wheel clockwise and the valve will close;
Main technical date:
Working pressure: 2000~20000PSI
Nominal bore: 2-1/16"~7-1/16"
Working temp: P~U
Product specification level: PSL1~4
Performance requirement: PR1~2
Material class: AA~FF
Working medium: crude oil, natural gas, drilling fluid

                                                                      


                                            

 

Pipe Cutting Machine

A pipe cutting machine shear, historically known as a lever shear and sometimes as a crocodile shear, is a metal-cutting shear with a hinged jaw, powered by a flywheel or hydraulic cylinder. Alligator shears are generally set up as stand-alone shears; however, there are types for excavators. They are generally used to cut ferrous members, such as rebar, pipe, angle iron, or I-beams.

Steel Pipes Shear, Iron Pipes Shear, Metal Pipes Shear, Copper Pipes Shear

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecometalsrecycling.com