1,Description
The sprayer are high pressure sprayer series. To four-stroke gasoline engine as the driving force, high-pressure piston pump is as the working source, the application of special gun spray height can reach vertical spray 6-8 meters. If you need a higher spray, you can extend the high pressure hose to work on a long pole.
2,Feature
1. Please check carefully before starting each of the fasteners are tightened to ensure that sprayer and motor are mounted on a tripod.
2. Adjust the drive belt and two pulleys to a parallel state , elastic medium.
3. Each locking tube connector to prevent leakage.
4 .Turn off the water before starting the motor switch , loosen the screw regulator , the regulator handle is pulled to the top.
3,Parameter
| Engine type | WDL-160 | ||
| Cylinder diameter | 68mm | ||
| Piston stroke | 45mm | ||
| Displacement | 163mm | ||
| Carburetor | Transistor ignition magnets (non-contact) | ||
| Start method | Recoil start | ||
| Allocation | 20 meters thick tube, 30 meters high pressure outlet pipe, 1.2 m spray gun, 0.9m spray gun | ||
| Sprayer height | 6-8m | ||
| Water tank | 160L | ||
| Spray model | 45A | ||
| Flow | 21-37.5 L/min | ||
| Working Pressure | 2-3.5Mpa | ||
| Dimension | 115*85*95cm | ||
contact informationÂ
Â
1,Description
The sprayer are high pressure sprayer series. To four-stroke gasoline engine as the driving force, high-pressure piston pump is as the working source, the application of special gun spray height can reach vertical spray 6-8 meters. If you need a higher spray, you can extend the high pressure hose to work on a long pole.
2,Feature
1. Please check carefully before starting each of the fasteners are tightened to ensure that sprayer and motor are mounted on a tripod.
2. Adjust the drive belt and two pulleys to a parallel state , elastic medium.
3. Each locking tube connector to prevent leakage.
4 .Turn off the water before starting the motor switch , loosen the screw regulator , the regulator handle is pulled to the top.
3,Parameter
| Engine type | WDL-160 | ||
| Cylinder diameter | 68mm | ||
| Piston stroke | 45mm | ||
| Displacement | 163mm | ||
| Carburetor | Transistor ignition magnets (non-contact) | ||
| Start method | Recoil start | ||
| Allocation | 20 meters thick tube, 30 meters high pressure outlet pipe, 1.2 m spray gun, 0.9m spray gun | ||
| Sprayer height | 6-8m | ||
| Water tank | 160L | ||
| Spray model | 45A | ||
| Flow | 21-37.5 L/min | ||
| Working Pressure | 2-3.5Mpa | ||
| Dimension | 115*85*95cm | ||
contact informationÂ
Â
Stainless Steel Pipe,Stainless Steel Tubing,Stainless Pipe,304 Stainless Steel Pipe
Shandong Shifeng Metal Products Co., Ltd. , https://www.qfgygs.com