There are a wide variety of concrete transportation tools and different transportation methods. It is better to use high efficiency and low transfer times to determine the transportation method. Commonly used transport equipment include single wheel carts, two-wheel rack trucks, dump trucks, automobiles, belt conveyors, tower cranes, gantry cranes (with buckets) and pumped concrete. Commodity concrete production, from the mixing station to the pouring site, is transported using special concrete mixer trucks.
Concrete transport is mainly based on concrete mixer trucks. This vehicle belongs to large-scale industrial vehicles. What do you need to pay attention to when driving safely? First of all, before starting, pay attention to: 1. Check whether the appearance of the organization scratches, check the hydraulic pump, the hydraulic motor should be no oil and other undesirable phenomena. 2, check the power take-off device - PTO situation, there is no loose screws and bearing oil leakage and other phenomena. 3, check the gearbox, engine oil, power steering fluid, battery fluid is enough, in line with the requirements of manufacturers. 4. Check whether the safety devices are effective and have no aging. 5, check the tubing, air pipe leakage aging phenomenon. 6, check the tire pressure is standard. During operation, it should be noted that 1, after the engine is started, the engine is idle for 5-10 minutes or more. 2. Rotate the drum at low speed for a few minutes. The oil pump and drum should be normal. 3. When the vehicle is stopped and cleaned, pay attention to the drum driving position and other rotating parts. 4. If the driver leaves the cab due to material preparation or discharge, the vehicle should be fully braked. 5. Be careful when operating the lever and avoid rough operation. 6. Prohibit rapid shifting, hurry up, and stop suddenly. 7, concrete feed, stirring, discharge should follow the operating procedures. 8, before walking, check the water tank. 9, downhill on the road to pay attention to the situation. Things to note when parking are: 1. After the work is completed, thoroughly clean the machine, ensure that there is water in the tank before cleaning, and do not turn the pump under the condition of sewage. 2, thoroughly remove the drum inside and outside the concrete. 3. Add grease and engine oil to the joint according to the lubrication map. 4, check the drum blade wear. 5 Clean all the water after cleaning.
The concrete transport vehicle has made great contributions to the construction of our country's building area and the building of various buildings, and has promoted the development of the concrete transportation industry. The price of concrete trucks varies from tens to hundreds of thousands, depending on the loading capacity. Of course, there is also a special concrete truck rental company. If you rent a car, it is much cheaper and it is also very convenient. With the constant innovation of technology, the concrete transporter is developing in a simpler, more compact and lighter direction, enhancing safety.
YUKA Compressed Air Filter design in according with ISO8573.1-2010 standard. With die-casting integrated technology, housing with 15 years spanlife, internal & external anti-corrosion treatment, 100% leakage tested in three time for each air filter.With sodium borosilicate fiber glass element material which help filtration up 0.01 micron for particles dust removal, 0.001mg/m³ for oil vapor residual.
Compressed air filter type:
Coalescing Filters
Coalescing Filters are probably the most important items of purification requirements in a compressed air system,which are designed not only to filter oil vapor and water, but also to filter solid particulates to an acceptable level as small as 0.01micron in size. Usually, in the installation system, the first filter's purpose is to pre-filter, protect the highefficiency filters from bulk contamination so as to provide high quality compressed air. If the air filters worked under damp or full of water adsorption condition, it would prevent the compressed air from getting through the filter element and the air low would force the liquid to get through from the pores of the element media. Thus increase working pressure drop and reduce filtration performance.
Activated Carbon Filters
Oil vapor can easily get through the coalescing filters in a state of gaseous, so the adsorptive filter must provide large activated carbon adsorption bed. Because the damp air will reduce the adsorptive ability of the activated carbon, the adsorptive filter usually installed after the adsorptive dryer, in order to guarantee effective removal of oil vapor and peculiar odor. it's not used to remove the liquid oil or aerosols, thus poor maintenance and lack of pre-filter will accelerate its invalidation.
Aluminum Air Filter,Coalescing Air Filter,Air Compressor Filter,Activated Carbon Filter
Hongrijia Depurate Facility Science & Technology Co.,Ltd. , https://www.yukafilter.com