How to solve centrifugal pump cavitation?

Centrifugal pump cavitation phenomenon:
1 sewage pump, the use of temperature of about 80 degrees, pump pressure rose to normal after the pump open the pump pressure is normal, about 10 minutes rapid decline in pump pressure, accompanied by noise, vibration, cavitation occurs, check the sewage station valve closed ,
2 material pump, about 90 degrees of material easy to gasify the organic matter Pump open after the pump pressure rose to normal, due to feed small pump outlet, the pump outlet opening small, normal pump pressure, pump pressure decreased about 30 minutes, accompanied by noise vibration, Occurrence of cavitation phenomenon The above phenomenon occurs, you will find two situations occur:
1, one is the opening of the valve is not large;
2, the other is the pump inlet and outlet material temperature was significantly increased than the original found in these two cases of cavitation occurs because the outlet valve opening is not enough or not caused when the outlet valve is not open or opening hours, the material obtained from the pump Energy is not promptly sent away, that is, the kinetic energy of materials is converted into heat energy, so that the material temperature increases, when reaching a certain temperature cavitation occurs in the pump body.
After analyzing the reasons for the clear solution to the pump outlet plus a return line, open the appropriate back to open the pump valve, there have been no cavitation.

More keyword search: Centrifugal pumps

Oxygen Sensor Spacer

* Fits all standard oxygen sensors with M18 x 1.5 O2 sensor adapter.

* Straight bolt-on, no modification needed, quick and easy installation to remove check engine light.
* High Quality Material-Made of Stainless steel which can avoid cracking and excessive heat expansion,
* Backed by 1 year warranty and our 100% satisfaction guarantee
* Built in micro catalytic converter, eliminate checking engine light(CEL) after modifing exhaustor or removing catalytic converter. The cell size of the cell 400. Euro 3.

Product Description:
*Solve the problem of P0420/P0042 codes faulty.

*Faulty catalytic converter is the most common reason to cause fault codes P0420/P0042. Include:
1. Check Engine Light is on.
2. Lack of power after vehicle warms up.
3. Speed of vehicle may not exceed 30-40 mph.
4. Rotten egg smell coming from the exhaust pipe.
* Install our Oxygen Sensor adapter which includes mini converter could help solve the problem.

Oxygen Sensor Spacer,O2 Sensor Spacer,Mini Catalytic Sensor Spacer,180 Degree Oxygen Sensor Spacer

Dongguan Jiaxing Precision Machinery Co., Ltd. , https://www.jiaxingmachinery.com

Posted on