Electric vehicles are also common vehicles in our daily life. In the process of driving electric trucks, there may be a gap in driving distance due to certain reasons, which leads to a direct cause of the large distance between driving distances. This may be due to the improper operation of the driver and the relatively poor battery life. Therefore, in order to be able to guarantee the good performance and long service life of electric vehicles, daily and periodic inspections and maintenance of vehicles are essential.
The pressure of the electric truck tires must be checked regularly. When the tire pressure is not normal, the power consumption will be fast, the mileage will be short, and the driving comfort will be affected. The service life of truck tires is reduced. The most serious situation is that it affects the safety factor of driving vehicles. Therefore, the tire pressure should be checked every 1-2 months. When cleaning the electric truck, it is necessary to wash the car in accordance with the correct cleaning method. During the entire cleaning process, it must be prevented that water flow into the vehicle causes a short circuit in the body circuit. Summer temperatures are high, so it is not advisable to park electric vehicles in the sun for prolonged periods of time. In a high-temperature environment, the internal pressure of the battery will increase, and the battery will lose water. When the vehicle owner is charging the electric vehicle, he must always refer to the frequency of daily use and driving mileage, and there should be no situation of excessive discharge and overcharging.
Because electric vehicles are used for a long time, they will cause noise due to certain faults. Specifically, how to solve the noise problems, you need to find the source before repairing it. There are several specific reasons for noise.
The noise caused by the failure of the electric control box of an electric truck, which is generally a current sound, checks whether there is a fault in the current connector or if some of the contacts have deteriorated. In such cases, the contacts and connectors should be replaced immediately before the noise can be eliminated. If the electric vehicle is driving, the noise caused by the friction between the electric gears, it should immediately stop the vehicle, and then check the operation of the electric gear in turn is not normal, observe the outer surface of the electric gear Whether there is damage, or the center axis can deviate from the position, etc., all result in an abnormal ringing of the gear oil. In addition, the noise at different locations also indicates that the failures are different. Therefore, it is necessary to perform an actual inspection immediately to be able to make the correct treatment.
Hydraulic Pilot Operated Check Valve
Hydraulic Pilot Operated Check Valve
Jiangsu haohong hydraulic Co.Ltd , https://www.jshhhydraulic.com