There are 4 steps in the wiring method of the explosion-proof platform lamp , as follows:
1. First choose the appropriate installation method.
2. Determine the installation position of the explosion-proof platform lamp, lay the steel pipe, and prepare the three-core cable wire of the corresponding length to be worn in the steel pipe. The cable should be exposed to a steel pipe of about 90 mm, and the cable at the front of the cable should be stripped 40 mm to expose the internal wires.
3. Pass the cable through the nut connector, gasket, seal ring and the top cover, and use the wrench to clamp the wrench on the nut connector. Tighten the nut connector to ensure the inside of the cap. The cable sealing ring is fully compressed. After tightening, the nut connector can only expose one or two buckles of the top cover. Then connect the steel pipe to the nut connecting piece, and use a wrench to clamp the wrench on the nut connecting piece to tighten the steel pipe, and tighten the steel pipe with the M4 screw on the nut connecting piece.
4. Use a hex wrench to loosen the screw on the top of the top cover, open the pressure plate of the fixed top cover, open the top cover, and introduce the three-core cable into the lamp cavity for wiring. Then tighten the crimping screw, close the top cover, and tighten the upper screw.
Jewelry Polishing Machine
A jewelry polishing machine is a machine specially used for polishing and cleaning jewelry. It usually uses abrasive tools such as grinding wheels or brushes to polish the surface of jewelry to make the surface smooth and bright, and improve its texture and aesthetics.
Advantages of jewelry polishing machine:â—Improve the aesthetics of jewelry: Jewelry polishing machine can polish the surface of jewelry to make the surface smoother, smoother and brighter, and improve its aesthetics and texture.
â—Improve the value of jewelry: the surface of polished jewelry is brighter and the texture is better, which can increase its value and increase the sales price.
â—Improve production efficiency: Polishing jewelry by hand requires time and skill, but using a polishing machine can greatly improve production efficiency, shorten processing time, and increase production efficiency and output.
â—Convenient and easy to use: It is easy to use the jewelry polishing machine, just place jewelry on the machine, and then start the machine for polishing.
â—Protection of jewelry: manual polishing is easy to damage the surface of jewelry, but the proper use of polishing machine can reduce the damage to the surface of jewelry and protect the quality of jewelry.
Jewelry Polishing Machine,Jewelry Polisher,jewelry polishing equipment,Polishing Machine Jewelry
Dongguan Bayi Automation Equipment Co., Ltd , https://www.bayiautomation.com