What are the installation methods of explosion-proof lamps?

What are the installation methods for explosion-proof lamps?

Xiaobian gives you a brief introduction. First of all, there are many kinds of explosion-proof lamps, including LED explosion-proof lamps, explosion-proof metal halide lamps, explosion-proof sodium lamps, explosion-proof street lamps, explosion-proof energy-saving lamps, explosion-proof fluorescent lamps, explosion-proof emergency lamps, etc. There are various installation methods for explosion-proof lamps, such as ceiling type, tube hanging type, suction wall type, bracket type, flange type, guardrail type, street light type, platform type, etc. The most commonly used ones are ceiling lamps and suctions. Wall type, bracket type.

Explosion-proof lamps should be checked from the nameplate and the product manual before installation, explosion-proof type, category, grade, group, installation method and fastener requirements for installation. The installation of the explosion-proof lamp should ensure that the fixing parts are firm, the fastening bolts must not be replaced arbitrarily, and the spring washers should be complete. At the cable entry point, the cable and the gasket should be closely matched. The section of the cable should be round, and the surface of the sheath should not have defects such as bumps. The excess inlet port shall be sealed according to the type of explosion-proof, and the compression nut shall be tightened to seal the inlet port.

Explosion-proof lamps are dangerous places for the presence of flammable gases and dusts. They can prevent arcs, sparks and high-temperature flammable gases and dusts in the surrounding environment, thus achieving explosion-proof requirements. There are mainly explosion-proof explosion-proof lamps, safety explosion-proof lamps, mobile explosion-proof lamps and so on. Explosive gas environment in Zone 1 and Zone 2. Combustible dust environment in Zone 21 and Zone 22.