Main Features:
1. Can identify the car model with photoelectric and approaching sensors.
2. Hot-dip galvanized frame can keep the whole machine stable and long life use.             Â
3. PLC electronic control panels system can easy to operate and maintenance. 4. The nylon material brush makes the car washing more quiet and clean.
5. High quality control systems, pumps and motors from Italy.
6. The high sensor on the top brush can keep the bus from damage.
7. The motor with IP67 make the machine work well in the water condition.
8. Fully automatic to wash the bus and truck body thoroughly.
9. With on-site installation and operate training for free and long time quality guarantee to whole wash machine.  Â
Â
Â
The advanced structure and parts of CB-730 bus wash machine
1. LED light systems.
2. PLC control systems imported from Japan.
3. Automatic wax and foam formulating system.
4. Wax sprinkling system automated.
5. The second generation nylon brush.
6. Hot-dip galvanized frame.
7. High pressure water systems.
8. The sensor made by BN from America.
9. The operate panel with flame retardant and weather resistance.
10. The frequency converter made by SL from Taiwan.
11. The air cylinder made by YDK from Taiwan.
12. The IP67 waterproof motor made by CD from Italy.
| Specifications | |
| Overall dimensions | 2150x4680x5200mm |
| Assembling range | 25000x6580mm |
| Moving range | 25000x5114mm |
| Available size for car | 18000x3500x4200mm |
| No. of brushes | 2-3 brushes |
| Available car to wash | bus, double-decker bus |
| Washing time | -- |
| Car wash capacity | 12-15buses/hour |
| Mains voltage | 3PHASE AC380V /50HZ |
| Total power | 8.86KW |
| Water supply | DN25mm/Waterflow rate≥120L/min |
| Water/electricity consumption | 220L/Bus, 0.59kw/Bus |
| Shampoo consumption | 25ml/Car |
All of us at Risense take great pride in offering our car wash for your consideration. We happy to answer any questions you may have or discuss with you which machine is best suit for your needs.Â
FAQ
Which service will you offer?
1. Beside to manufacture touch-free car wash, rollover car wash, tunnel car wash, bus and truck wash, wheel wash system with our own brand. We also offer ODM and OEM from all customers' requirements.
Who will install my car wash?
2. We offer you the construction design drawings for your car wash bay, then we will send our engineer to your side to install and operation training.
How long will the machine quality guarantee?
1. We have made the car wash machine running-in times before leave factory, and the failure rate is approaching zero, for the pumps, motors and electronic control panel systems all form Japan.
2. The whole car wash machine guaranteed one year, and parts of components guaranteed 2-3 years. The wearing parts will offer you additional, such as wheels, chains and nozzles.
3. The working life of the car wash can up to 15-20years. CB-730 Automatic bus and truck wash machine
Main Features:
1. Can identify the car model with photoelectric and approaching sensors.
2. Hot-dip galvanized frame can keep the whole machine stable and long life use.             Â
3. PLC electronic control panels system can easy to operate and maintenance. 4. The nylon material brush makes the car washing more quiet and clean.
5. High quality control systems, pumps and motors from Italy.
6. The high sensor on the top brush can keep the bus from damage.
7. The motor with IP67 make the machine work well in the water condition.
8. Fully automatic to wash the bus and truck body thoroughly.
9. With on-site installation and operate training for free and long time quality guarantee to whole wash machine.  Â
Â
Â
The advanced structure and parts of CB-730 bus wash machine
1. LED light systems.
2. PLC control systems imported from Japan.
3. Automatic wax and foam formulating system.
4. Wax sprinkling system automated.
5. The second generation nylon brush.
6. Hot-dip galvanized frame.
7. High pressure water systems.
8. The sensor made by BN from America.
9. The operate panel with flame retardant and weather resistance.
10. The frequency converter made by SL from Taiwan.
11. The air cylinder made by YDK from Taiwan.
12. The IP67 waterproof motor made by CD from Italy.
| Specifications | |
| Overall dimensions | 2150x4680x5200mm |
| Assembling range | 25000x6580mm |
| Moving range | 25000x5114mm |
| Available size for car | 18000x3500x4200mm |
| No. of brushes | 2-3 brushes |
| Available car to wash | bus, double-decker bus |
| Washing time | -- |
| Car wash capacity | 12-15buses/hour |
| Mains voltage | 3PHASE AC380V /50HZ |
| Total power | 8.86KW |
| Water supply | DN25mm/Waterflow rate≥120L/min |
| Water/electricity consumption | 220L/Bus, 0.59kw/Bus |
| Shampoo consumption | 25ml/Car |
All of us at Risense take great pride in offering our car wash for your consideration. We happy to answer any questions you may have or discuss with you which machine is best suit for your needs.Â
FAQ
Which service will you offer?
1. Beside to manufacture touch-free car wash, rollover car wash, tunnel car wash, bus and truck wash, wheel wash system with our own brand. We also offer ODM and OEM from all customers' requirements.
Who will install my car wash?
2. We offer you the construction design drawings for your car wash bay, then we will send our engineer to your side to install and operation training.
How long will the machine quality guarantee?
1. We have made the car wash machine running-in times before leave factory, and the failure rate is approaching zero, for the pumps, motors and electronic control panel systems all form Japan.
2. The whole car wash machine guaranteed one year, and parts of components guaranteed 2-3 years. The wearing parts will offer you additional, such as wheels, chains and nozzles.
3. The working life of the car wash can up to 15-20years.
Combine Knife Section
1. Material: 65Mn (or T9.
2. Teeth: Pressing or Milling.
3. Surface: Only with anti-rust oil; varnish stoving; galvanized;
Chrome finish; blueing, etc. Different surface treatment to protect
against corrosion.
4. Wide variety of sections to fit most applications, smooth, top serrated and under serrated.
5. Hardness: 50-55 HRC, Induction hardening process guarantees long wear.
6. Thickness: 2.00MM; 3MM; 4MM; 5MM; Etc.
|
___________________________________________________________________________________________________
Combine Advantage:
1. We have been working internationally in the area of agricultu al parts and bearings since 2002 and have excellent knowledge,experience in the agricultural field.
2. We offer over 1000 different spare parts for a wide range of agricultural machinery, from combine harvesters, mowers,rakes to balers.They are used for various makes like John Deere, LAVERDA ,Claas, New Holland and Case/IH.
3. Averagely we add at least five new items monthly to our production range. This wide supply and quick development are our big advantages over our competitors
4. [Quality",[honesty"and[service" is our principle, we export to more than 56 countries at present, mostly to Europe.
|
Specification:
1. Function/Use: Widely used for John Deere, New Holland, Class, Case, Schumacher machinery
2. Feature/Characteristic: Knife assemblies come with heat treated knife connectors, providing maximum stability and strength
3. Advantages: Maximal safety due to rigorous quality checks and test.
|
4. Superiority: Very Strong, including in the connector area
5. We can supply the Cutter Bar Assembly with wide range length, also can supply all parts
6. Any samples or detailed drawings are welcome here. We have professional engineers to develop new products with you
7. Certificate: CE and ISO9001, Alibaba Trading Assessment
|
|
Constitute of knife assembly |
|
|
Material: |
65Mn or T9 |
|
Hardness: |
HRC50-55, Induction hardening process guarantees long wear |
|
Thickness: |
2.00-2.8mm |
|
Teeth: |
Pressing or Milling |
|
Surface: |
Only with anti-rust oil; varnish stoving; galvanized; Chrome finish; blueing, etc, |
|
Colors: |
natural varnished, red or green varnish, chromated sections or as requested |
|
Use: |
All kinds of knife sections suitable for John Deere, New Holland, Claas, Case,Schumacher, Kubota, Yanmar, Ford and so on |
|
Other advantage |
End section / half section, which reduces troublesome cutter bar clogging in thick |
|
2. Knife Head: |
|
|
Material: |
iron, steel, rubber |
|
Processing Craft |
Forged, machined and casting |
|
Use: |
Different kinds of knife heads for different makes of combine harvesters, swather,lawn mower, like John Deere, New Holland, Claas,Case and MF. |
|
Application: |
According to different working condition, forged, machined and casting quality is available. |
|
Special mould development,according to customers' requirements,based on the sample or drawing |
|
|
Popular models AH121075, AH89498, AZ50341, 059509P1 and so on. |
|
|
3. Knife back(Cutter Bar): |
|
|
Material: |
Cold drawn steel |
|
Surface Treatment: |
Zinc Plated, Pray Paint, and Powder painting |
|
Length |
1930mm, 6000mm, optional |
|
Width |
20mm, optional |
|
Thickness |
6mm, 7mm,optional |
|
Colour |
Black, Natural color |
|
Feature: |
The bar with exact measurement holes or without holes will be available |
|
4. Bolt and Nut: can be supply: |
|
|
|
Combine Knife Section
Knife Section Combine Parts, Knife Section, Pro Cut Knife Section
Ningbo Combine Machinery Co.,Ltd. , http://www.combine-harvester-parts.com