Electric constant temperature incubator features
1, the shell is made of high quality cold-rolled steel plate, the surface of the use of electrostatic spray process.
2, the studio uses stainless steel or high-quality cold-rolled steel sheet processing, and rust-proof anti-corrosion treatment.
3, optional pointer type temperature controller or microcomputer intelligent temperature controller, intelligent temperature controller using PID control program, large-screen digital display, touch-type operation buttons, with over-temperature alarm function.
4. There is a double-glazed glass observation window in the middle of the door to facilitate direct observation of changes in the culture.
5, magnetic tape seal, convenient opening and closing, good sealing.
How to install and debug the electrothermal thermostat in use? What are the things to watch out for in the installation process? Below are some aspects of this kind of knowledge.
1. Take care not to force on the glass during transportation, and do not hit the box. When the instrument is under normal working conditions, such as opening the door for too long, closing the door after a temporary change in the temperature inside the box, this is a normal phenomenon.
2. After the electric heating constant temperature incubator falls to the ground, it should be placed as smooth as the ground unevenness should be corrected.
3, do not use the instrument in direct sunlight or hot and humid places.
4. The equipment should be far away from sources of electromagnetic interference, and the grounding wire of the equipment should be effectively grounded.
5. When the equipment is in normal operation, placing the contents in the box should not affect the air circulation to ensure that the temperature inside the box is uniform.
6, the power supply is AC 220V 50HZ, must use more than 16A three-core socket, and a reliable grounding line, not to use two-pin socket. Do not press the power cord to the back of the power cord, and do not allow the instrument or other object to press on the power cord, so as not to damage the power cord.
Before the products leave the factory, they have undergone rigorous testing, and generally do not need to be corrected. If the environment is harsh and the ambient temperature exceeds the suitable range, the temperature display value and the actual temperature error in the cabinet will be caused. If the temperature exceeds the range of the technical specifications, you can refer to the temperature control. Operating instructions are corrected as needed.
Ningbo Dasky Life Science/ Eralab Scientific Instrument(HK)Co., Limited. , https://www.daskyswab.com