How to prevent accidents and handling measures of the wireless remote control system in the driving industry 1) Inadequate working experience and mental paralysis of the driver. After the crane is placed, blind lifting is performed when the object to be lifted cannot be carefully checked and evaluated.
(2) The driver violated regulations and did not pass strict rules strictly concerning the technical parameters when the crane was hoisted. As a result, the secondary arm was too long and the boom was too large, causing an accident.
(3) The lack of management of the vehicle management department failed to arrange special personnel to conduct on-site command during the lifting operation.
Objective Causes of Industrial Wireless Remote Control Accidents (1) The vehicle crane does not have a torque limiter device, and thus cannot provide the driver with accurate technical parameters to avoid such accidents.
(2) The constructor fails to provide the driver with details (such as size, weight, etc.) of the lifting object. When the crane is hoisted, the connecting arm is still lying in a closed cabin. The driver cannot lift it before lifting it from the cabin. Take a detailed look and estimate the weight.
Pre-driving industry wireless remote control accident measures (1) Strengthen the driver's safety operation procedures education so that he can master the relevant technologies.
(2) Strictly abide by the requirements of laws and regulations such as the "Regulations on the Supervision and Administration of Special Equipment Safety". Drivers must hold certificates, and carry out regular inspections and inspections of vehicles.
(3) For a special site operation project, the lifting unit shall conduct detailed inspection and demonstration, and formulate a detailed operation plan, and must also arrange full-time personnel to conduct on-site command.
(4) Torque limiters are added to the vehicle to fundamentally eliminate the potential safety hazards due to overload.
(5) When selecting the hoisting site, you must choose a flat, hard and open site with no looseness, collapse, and sewer manhole cover.
(6) Maintain and maintain the vehicle to ensure that the vehicle is in a state of perfect technical condition. In particular, it is necessary to frequently inspect the main arm, the support leg cylinder, the support cushion, and the amplitude change cylinder for cracks and oil leakage.
(7) Before lifting, the driver must estimate the weight of each piece of lifting gear, and blind lifting is forbidden.
(2) The driver violated regulations and did not pass strict rules strictly concerning the technical parameters when the crane was hoisted. As a result, the secondary arm was too long and the boom was too large, causing an accident.
(3) The lack of management of the vehicle management department failed to arrange special personnel to conduct on-site command during the lifting operation.
Objective Causes of Industrial Wireless Remote Control Accidents (1) The vehicle crane does not have a torque limiter device, and thus cannot provide the driver with accurate technical parameters to avoid such accidents.
(2) The constructor fails to provide the driver with details (such as size, weight, etc.) of the lifting object. When the crane is hoisted, the connecting arm is still lying in a closed cabin. The driver cannot lift it before lifting it from the cabin. Take a detailed look and estimate the weight.
Pre-driving industry wireless remote control accident measures (1) Strengthen the driver's safety operation procedures education so that he can master the relevant technologies.
(2) Strictly abide by the requirements of laws and regulations such as the "Regulations on the Supervision and Administration of Special Equipment Safety". Drivers must hold certificates, and carry out regular inspections and inspections of vehicles.
(3) For a special site operation project, the lifting unit shall conduct detailed inspection and demonstration, and formulate a detailed operation plan, and must also arrange full-time personnel to conduct on-site command.
(4) Torque limiters are added to the vehicle to fundamentally eliminate the potential safety hazards due to overload.
(5) When selecting the hoisting site, you must choose a flat, hard and open site with no looseness, collapse, and sewer manhole cover.
(6) Maintain and maintain the vehicle to ensure that the vehicle is in a state of perfect technical condition. In particular, it is necessary to frequently inspect the main arm, the support leg cylinder, the support cushion, and the amplitude change cylinder for cracks and oil leakage.
(7) Before lifting, the driver must estimate the weight of each piece of lifting gear, and blind lifting is forbidden.
UNI flange is Italian flanges standard, flanges pressure PN6 PN10 PN16 PN25 PN40, flanges type plate, blind, lapped, screwed, weld neck, flanges norm UNI2276, UNI2277, UNI2278, UNI6092, UNI6093, UNI6094, UNI6083, UNI6083, UNI6084, UNI6089, UNI6090, UNI225, UNI2254, UNI2280, UNI2281, UNI2282, UNI2283, UNI2284 etc
Uni Flanges manufacturer, uni 2276 2277 2278 flanges, uni 6089 6090 flanges, uni 6091 6092 6093 6094 6095 flanges, uni 2280 2281 2282 flanges
Jinan Hyupshin Flanges Co., Ltd , https://www.iflange.com