“Every day, 5 piles with a diameter of 800mm can be obtained in only 12 hours by Shanhe Intelligent 300H Rotary Drilling Rig, and the other three brands of Rotary Drilling Rigs on the construction site take 16 hours.†, Project manager Liu Zhiyong praised the outstanding performance of two Shanhe intelligent SWDM300H rotary drilling rigs on the construction site.
The construction site is the Wuhan Rongchuang Wangjiang House project, which is located under the Yingzhouzhou Yangtze River Bridge and beside Wujindi Road. The construction period is 6 months and a total of 2680 piles. The diameter of the hole is 800mm, the depth of the hole is 32m, and the rock is 2m. The supporting layer is weathered limestone. Liu Zhiyong said that because the project has a tight schedule, the pile foundation construction must be completed by the end of November, and the efficient construction of the Shanhe intelligent rotary drilling rig has guaranteed the progress of the project schedule.
Project Manager Liu Zhiyong
Shanhe Intelligent Rotary Drilling Rig not only works fast, but also saves fuel. Yang Bing, the warehouse director of the project, knows the fuel consumption of each rotary drilling rig on the construction site. "Under the same conditions, each Shanhe intelligent 300H rotary drilling rig can save about 50 liters of fuel per day compared to other brands." Yang Bing calculated a bill, and a Shanhe intelligent rotary drilling rig can save more than 300 yuan per day in fuel consumption.
Project warehouse supervisor Yang Bing
It is reported that SWDM300H Rotary Drilling Rig is a new product launched by Shanhe Intelligent at the 2018 Shanghai Bauma Exhibition. It continues the consistent characteristics of Shanhe Intelligent Rotary Drilling Rig “capable of hard bonesâ€. The maximum drilling diameter is 2.5m and the maximum drilling With a depth of 95m and a maximum torque of 320KN.M, it is suitable for the construction of pile foundations with large apertures and hard strata under various strata. One year after launching the market, it has been fully recognized by customers, and won the star product award at the CMIIC2019 China Construction Machinery Industry Internet Conference and Brand Event.
The rig uses the hydraulic and power system adaptive matching technology to save energy and reduce consumption. It has the advantages of good fuel economy and high reserve power. It can also run normally in high cold and high altitude areas.
The new-generation rig's 1-meter-wide cab has great air-conditioning effects, which greatly improves comfort and ergonomics. At the same time, Shanhe Intelligent took the lead in developing remote control operation technology to make it safer to assemble and transport the new machine.
Ethylene Decomposition Furnace Anchor
There are many types of anchors, and high-holding anchors are commonly used on drilling platforms, as shown in Figure 1. The main feature of this anchor is that its gripping force can only be guaranteed when the pulling force is in the horizontal direction. If the pulling force has a vertical component, the gripping force is reduced, and the anchor claw will be pulled out of the ground. Experiments show that the grip force starts to decrease when the anchor handle is turned up by 6°, and the grip force decreases significantly when the anchor handle is turned up by 12°. Therefore, when mooring, the lower end of the anchor chain must be tangent to the seabed, otherwise there is a danger of running the anchor. Lifting the anchor is to use this feature, pull the anchor chain upward to lift the anchor handle, the anchor loses its grip, and finally breaks out of the ground.
Ethylene Decomposition Furnace Anchor,Refractory Casting Anchors,Anchors For Pre Heater,304 Stainless Steel Refractory Anchor
Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com