Liberated compressed garbage _ Tiger V 6 party compressed garbage price
On this New Year's Day, the user of Shijiazhuang ordered 21 6-way compact garbage trucks in our company. The user brought the liberation chassis to the factory for modification. He bought a car in our company in the early stage, so he firmly believes in our products. To be anxious, President Wang must discuss that all construction must be completed within 15 days, and all trains must be completed within 20 days. The delivery time in 20 days will be the 26th of the month. In the cold weather, all our production workers went all out, not afraid of suffering or overtime, and did not complain that the quality and quantity were exceeded to complete the production task in advance, which has reached a record high for our company's production capacity in history. Contact Minister Liang
Contact Minister Liang
FAW Jiefang 6-party compression garbage truck chassis configuration:
The chassis is made by FAW Jiefang, new full interior, wide-body 1900mm cab, Wanliyang 5-speed gearbox, 7.00R16 steel tires, fixed-speed cruise, air brakes, power steering, clutch assist, ABS, 3.5-ton rear axle, ABS Anti-lock braking system.
Special configuration for FAW Jiefang 6-party compression garbage truck:
The box material is high quality manganese steel from Wuhan Iron and Steel. The thickness of the material is 3mm on the side plate and 4mm on the bottom plate (thickness can be thickened according to customer requirements). The loading capacity of the box is 6 cubic meters. Will change, the national standard 240 litre bin can hold 80-85 full barrels).
The vehicle is equipped with 2 sets of control systems:
1. Manual hydraulic system (manual hydraulic system can be used to prevent the electronic control system from being paralyzed);
2. Electric control system (using German Siemens electric control system, which can reduce one operator, one person can operate the entire vehicle system to automatically compress, reducing labor costs by about 3-4 million yuan per year);
The rear turning mechanism of the compressed garbage truck can be installed according to user requirements:
â‘ , Hanging 240L or 660L national standard plastic trash can turning mechanism (optionally equipped with sealing cover);
â‘¡, hanging iron bucket type turning mechanism (optional sealing cap);
â‘¢, swing arm type turning mechanism (the volume of the garbage bucket is about 3 cubic meters);
④ 〠Semi-sealed garbage truck / dustpan bucket type turning mechanism (advantage: easy to turn loose domestic garbage on the ground);
⑤ Fully sealed garbage bucket turning mechanism.
Special performance of FAW Jiefang 6-party compression garbage truck:
The whole vehicle adopts electro-mechanical and hydraulic integration technology, with the aid of mechanical, electrical, and hydraulic linkage control systems, to achieve garbage dumping, crushing and squashing through devices such as fillers and shovels. The garbage is squeezed into the compartment and compacted and pushed. There is a sewage collection tank at the bottom of the filler, and the sewage in the carriage can flow into it (prevention of fines for leakage of sewage), and can be discharged through the sewage outlet when the garbage is discharged from the landfill. The key parts are imported parts, which have the advantages of high pressure, good sealing, easy operation and safety.
The loading and unloading cycle is a one-button operation. The control operating system is divided into electric control and manual control. Manual control is to prevent the electronic control system from working normally when it fails.
When unloading garbage in the landfill, our company installed a patented one-key unloading system, which can completely clean the garbage in the garbage box and the filler. No more digging with shovel or hoe to unload garbage.
The lifting angle of the filler is large, and it will not happen when the garbage is unloaded:
Picture of compressed garbage truck control operating system:
Product Pictures of FAW Jiefang 6-Part Compression Garbage Truck
President Wang said that there are orders from 8 parties in the later period, and he also brought the chassis to the factory for modification. He looks forward to working with President Wang for the third time. Because the delivery time is too tight this time, the production director said that the car will be ordered again using new technology.
Manufacturer: Hubei Chusheng Automobile Co., Ltd.
Address: No. 9 Jiliang Avenue, Suizhou, Hubei
Contact Minister Liang
There are currently two processes for PVC roll: extrusion and calendering. We have two kinds of products: hard film and soft film, the thickness of hard film can reach 2mm, and the thickness of soft film can reach 5mm
Hard sheets are mainly used for blister packaging, printing, collars, etc.
The film is mainly in the packaging and the like
There are two kinds of film colors: normal and super-transparent
PVC can be customized color, processed is a very good packaging material
Pvc Roll,Pvc Roller,Pvc Roll Flooring,Pvc Jumbo Roll
SUZHOU OCAN POLYMER MATERIAL CO.,LTD , https://www.ocanplastic.com