How to use wing brakes correctly

Wing brakes are becoming more and more common in real life, and security products have entered every industry. In the correct use process, the noise and impact problems during running can be reduced. To improve the service life of the whole machine, in order to give full play to the advantages of the wing brake, the following matters must be observed during use:

A: During the use of the wing gate, the cardholder swipes the card outside the yellow line. Do not stand at the infrared alarm of the wing gate to swipe the card. You can enter only when the wing gate is opened to a certain degree and there are indication arrows. Zui is good not to stay in it. Convenient to improve the fluency of the channel.

B: The cardholder should not fold, alter, or put the card with magnetic items together to avoid the card becoming invalid. If the card is lost, it must be re-registered with the management department in time to prevent information from being leaked.

C: During the passage of the wing gate, do not follow it into the wing gate passage. Do n’t force the wing brake plate away, so as to avoid the pinch of the wing plate, the front staff has passed the middle point, and the rear staff can swipe the card. (Customers who have used the old wing brake should pay attention to it. 2012 is new, old wing The gate must be closed when the gate is in place to swipe the card.) When the card is swiped, an arrow indicates that the gate is opened at the same time, so that the gate can be quickly passed. Do not pass the machine if there is an alarm or voice prompt. If there is a problem with the machine, notify the management department to check it immediately, and have a professional engineer perform maintenance.

D: The cardholder swipes the card in the induction zone. Don't overdo it so as not to be inducted. Do not post the card in the induction zone. It is correct to hold the card in the right side and parallel to the induction zone. The voice of "Di" proves that the card has been successfully swiped.

E: The wing brake also needs frequent maintenance. Don't think it is almighty. Regularly dust the inside and outside of the case. (Refer to the maintenance and treatment method of swing gate and wing gate) to ensure the normal operation of the equipment.