The wiper system is one of the main safety devices of the car. It can eliminate raindrops and snowflakes on the windows in snow or rain, and muddy water splashed on the front windshield when driving on muddy roads ensures drivers are clean. The line of sight ensures the safety of the vehicle. Today, I would like to introduce to the majority of cardmates the glass water nozzles associated with the wiper system.
The configuration of glass water nozzles in the vehicle is not often overlooked by most car owners. If glass water is an important factor in cleaning the front windshield, the glass water nozzle is a necessary link to determine this important factor. When we use glass water to clean the front windshield, we will find that the spray is sometimes too low, and sometimes the spray is too high. What should we do in this situation? In fact, solving this problem is very simple. Today we will talk about how to adjust the columnar glass water nozzle.
â— Let's talk about what we need to pay attention to in daily use.
1. Energizer Avoid the use of glass water mixed with alcohol and tap water. Alcohol contains glycol, which can corrode the wiper strips. The presence of water and alkali in the water will cause scale after long-term use, resulting in blockage of the water outlet. It is recommended to use special glass water for automobiles.
2. Cardmates can regularly clean them, mainly dealing with some residue and dirt. However, attention should be paid to cleaning so as not to cause nozzle angle change.
â— How to adjust the angle
The tool to adjust the angle of the nozzle is very simple, only a small nail is enough. First of all, we first spray glass water, pay attention to see if the water column is in a reasonable area, if not, probably remember the location of the water spray with a small nail ready to insert the water inlet for fine-tuning.
â— Observe the appropriate height
The angle of water spray should not be too high or too low. Spraying too low may make the driver's line of sight uncleanable. The effect of spraying too high is not good, and the glass water sprayed during driving may be carried to the roof of the car by air. It is on the rear of the vehicle, so it is advisable to spray glass water in the middle of the front glass.
â— Postscript:
If you find your car nozzle spray angle is too high or too low, then move your finger, the entire adjustment process just takes a few minutes. If you go to a repair shop or a roadside repair shop to repair it, the average car repairer will need to replace it. In fact, only a few adjustments can be made. If you insist on a new one, you can't stop you. .
Glass Spider Fittings,Glass Fitting Spider,Spider Fittings,Spider Connection Glass
DONGYING SHENGYU METAL PRODUCT CO.,LTD , https://www.sycastingprocess.com