1 Pair DC 12V 115dB 5A Tone Loud Car Horn 8 Sounds Air Snail Horn Boat Motor Car Truck SUV Motorcycle Accessories High Quality

Technical parameter:
Features:
1.The real test in our laboraroy that show to us the horn can get 110db at least.
2.Super long surround sound,it make the sound powerful and comfortable so that decrease the trafficaccident.
3.We used the imported high quality manganese steel to make the soundboad so that can make the fullest possible "BABA~~" sound.
4.We use the most advanced Teflon coat technology.I can be dust-proof and water-proof effectively(We must inform you that there are not have any horn factory can make a universal horn that all waterproof).It prolong the lifetime of the horn effectively.
5.We used the 100%ABS material to make the horn bulb.It has very good Heat resistance,impact resistance,anti-corrosion so that can prevent the dinas and the heat of the engine damage for the horn.Anyway,it also has high hardness characteristic.It can drop from 1 meter that is not easy to break.

What should I note when I am Installing and using?
a. Snail down or 45 degree Angle installation, Prevent water  into coiled directly
b. If you are not special peason , dont change the angle degree of Steel Support,or it will change the Original air gap
c. mounting torque of Steel support is between 6Nm to 11Nm.
d. The horn support should be mounted to Solid surface to avoid resonance.
e. In order to avoid contact with other parts of the car,The horn should be connected with horn support and installed to wide and Ventilated place.
f. Nonpolarity requirements for this product, the connected place of the wire should solid enough, Double horn should installed on solid part of car body in parallel way.
g. Keep away from car motor and much Radiation place. Not be too low mounting.
h. Don't keep the horn on for 60 seconds, or it will lead to the coil burned down.
i. Using copper wire, more than 1.5mm for wire Diameter, the wire length should less than 4m.
j. Standard mounting Voltage, input working current more than 30A,12V horn voltage: 9-14.5V  


Our company is a professional manufacturer and exporter that is concerned with the design , development and production of auto parts , we are
fully committed to producing technologically advanced auto parts.


Contact us:
Guangzhou Jindong Electronic Technology Co.,LTD 
Add: No.1,Gudong Industrial Zone,Gulong Road,ShawanTownship,Panyu District,Guangzhou

Benki Huang

Tel:+86-020-34738085                                  
Mob:+86-13922729780
Fax:+86-020-84737552 
 
 
                                         
 
 




Technical parameter:
Features:
1.The real test in our laboraroy that show to us the horn can get 110db at least.
2.Super long surround sound,it make the sound powerful and comfortable so that decrease the trafficaccident.
3.We used the imported high quality manganese steel to make the soundboad so that can make the fullest possible "BABA~~" sound.
4.We use the most advanced Teflon coat technology.I can be dust-proof and water-proof effectively(We must inform you that there are not have any horn factory can make a universal horn that all waterproof).It prolong the lifetime of the horn effectively.
5.We used the 100%ABS material to make the horn bulb.It has very good Heat resistance,impact resistance,anti-corrosion so that can prevent the dinas and the heat of the engine damage for the horn.Anyway,it also has high hardness characteristic.It can drop from 1 meter that is not easy to break.

What should I note when I am Installing and using?
a. Snail down or 45 degree Angle installation, Prevent water  into coiled directly
b. If you are not special peason , dont change the angle degree of Steel Support,or it will change the Original air gap
c. mounting torque of Steel support is between 6Nm to 11Nm.
d. The horn support should be mounted to Solid surface to avoid resonance.
e. In order to avoid contact with other parts of the car,The horn should be connected with horn support and installed to wide and Ventilated place.
f. Nonpolarity requirements for this product, the connected place of the wire should solid enough, Double horn should installed on solid part of car body in parallel way.
g. Keep away from car motor and much Radiation place. Not be too low mounting.
h. Don't keep the horn on for 60 seconds, or it will lead to the coil burned down.
i. Using copper wire, more than 1.5mm for wire Diameter, the wire length should less than 4m.
j. Standard mounting Voltage, input working current more than 30A,12V horn voltage: 9-14.5V  


Our company is a professional manufacturer and exporter that is concerned with the design , development and production of auto parts , we are
fully committed to producing technologically advanced auto parts.


Contact us:
Guangzhou Jindong Electronic Technology Co.,LTD 
Add: No.1,Gudong Industrial Zone,Gulong Road,ShawanTownship,Panyu District,Guangzhou

Benki Huang

Tel:+86-020-34738085                                  
Mob:+86-13922729780
Fax:+86-020-84737552 
 
 
                                         
 
 

Blue and White Filter / Air Inlet Filter

Blue and White Filter also called, Air Inlet Filter, Pre Filter Media, coarse filter media.

hetic particles larger than 5μm; the air control system of general ventilation equipment filters the filter structure as pre- or coarse fiber; the dust-free woven filter layer structure composed of combined resistance PET is used, according to the extensive characteristics of dust, use Various characteristics, using the size of the dust to be blocked in the range, the high quality of the dust is more effectively used; it has the measurement volume and low resistance, economical practicability;

· Contains no silicon and is resistant to chemicals such as chemical solvents and acid fumes;

· Meet the fire classification standard DLN53438-F1 in Europe and UL900-class2 in America;

· Mostly used for plate type and dense folding filter;

· With paper frame galvanized frame or aluminum frame, etc.

It can be cut out according to the size of the air supply port and installed directly to the air supply port. It can also be made into plate type, folding type and bag type filter. After waterproof treatment, it has the function of cleaning. It can be used for automatic coiling filter unit with single side net, coiling core and paper tube.

Under the condition of rated air volume, it can be used normally for 1~2 months, that is, the filter cotton needs to be replaced; Or when the resistance of the filter cotton reaches more than 200Pa, the filter cotton must be replaced; If the filter cotton is washable, replace the filter material, can be washed with water or containing neutral detergent solution, compressed air dry or cool dry, and then change; It can be cleaned twice at most, that is, new filter cotton must be replaced, and each cleaning, the filtering efficiency will be reduced by 15%; If the dust concentration in the service environment is large, the service life cycle will be reduced.

Blue and White Filter is suitable for various industrial uses, such as pollution prevention, public construction, air conditioning, electronics, pharmaceutical, food industry, etc.

It is also suitable for coarse dust filtration and pre-filtration of medium-effect air filtration system.

Pre filter media a big category, It covers Air intake filter, Floor filter, paint stop filter, fiberglass filter, non woven filter, Activated Carbon Filter, Flame-retardant filter media, synthetic filter media, etc.

Blue And White Filter / Air Inlet Filter,Bule And White Filter,Ceiling Filter,Cell Pockets Filter

Guangzhou Airy Filter Media Co.,ltd , https://www.gzairy.com