Detailed analysis of assembly line classification and characteristics

The assembly line is also called the assembly line. According to the assembly line, it can be roughly divided into seven types of assembly lines: belt assembly line, plate chain line, double speed chain, plug-in line, mesh belt line, suspension line and drum line.

The belt flow assembly line is characterized by lighter weight and fewer shape restrictions; it can be used for the product's climbing and turning in synchronism with the production line; the belt can be used as a carrier and conveying, which can realize smooth conveying of the product with low noise; light material can be realized. Or the product is transported over longer distances.

The characteristics of the plate chain assembly line are that the products it carries are heavy, and the production line can run synchronously, which can realize the climbing of the products; the production is not fast; the chain plate surface is used as the bearing, which can realize the smooth delivery of the products.

The double-speed conveying line is more complicated. Double-speed chain traction is adopted. The tooling plate can be freely conveyed. The blocker is used to position the workpiece to move freely or stop. The workpiece can be automatically lifted at both ends, and the transition can be shifted laterally. It is also possible to install rotation (90 degrees, 180 degrees), special planes, testing equipment, robots, etc. on the body or on the side of the body.

Plug-in lines are widely used in the electronics industry. The combination and configuration of the plug-in line can be arbitrarily changed. The speed of the plug-in line can be adjusted with the speed-changing knob to achieve the required conveying speed. The width can be made at any time with the width of the circuit board. The body is made of aluminum alloy. The hand-push plug line uses the aluminum profile rail as the transmission medium. Therefore, the thread body has a small friction, no noise, and no need to add any lubricating oil, and there is no any pollution to the printed board conveyed.

Mesh belt line is a line equipment that uses metal mesh as a carrier and is commonly used for drying products.

Suspension line is the hanging chain conveying line, which completes the product transportation in a hanging manner. It is often used together with spray painting and drying equipment for the surface treatment of hardware lighting plastic wood devices.

Drum type line is characterized by a wide range of product types, and it is subject to less restrictions; in conjunction with the use of stoppers, it can achieve continuous, taktaging and accumulation of products; with the lifting translation device, offline rework of products can be achieved or Detection does not affect the operation of the entire assembly line.

These are the characteristics of each of the seven assembly lines. Each customer can customize an appropriate assembly line based on the products and scale of their own factories. It is believed that the production efficiency will be greatly improved.