Does the engineering cylinder make you feel relieved or I feel like saving money every second

   The analysis of the wear and tear of the engineering cylinder is detailed in three aspects:

1. Before the piston slides on the external surface of the wound to convey the piston device, the sliding surface is marked with scars, no treatment is performed, and the device is performed intact. These marks will in turn cause scratches on the inner and outer surfaces of the cylinder wall. Therefore, before the installation, it is necessary to make adequate repairs to these scars.

2. Exfoliation of the hard chromium layer on the outer surface of the cylinder

3. Slurry formed by the piston sliding outside and outside the gauge pressure is too large to make the piston skew due to the effect of the piston rod's own weight, showing the other appearance, perhaps because of the effect of the lateral load, etc., the pressure on the sliding surface of the piston rises, which will lead to sintering appearance. It is necessary to study its working conditions in the design of the engineering cylinder, and it is necessary to pay sufficient attention to the length of pistons and bushes and the dimensions of voids.

Company Name::Dezhou City Decheng Hydraulic Machinery Factory

Contact: Manager

Phone : 0534-2468201

Hand Machine: 13589918201

Website address:  

Mailbox:

Address: 56 West Industrial Park , Dezhou City