Pressure Steam Bolier Feed Water Pump

Model NO.: D
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump, Multistage Pump
Warranty: 1 Year
Drive: Electric Motor/ Diesel Engine
Voltage: 220V/380V/410V/460V/High Voltage
Frequeccy: 50Hz/60Hz
Color: as Customer Required
Sealing: Mechanical Seal/ Packing Seal
Material1: Cast Iron
Material2: Cast Steel
Material3: Stainless Steel
Material4: High Chrome
Trademark: DEPON
Transport Package: Plywood Cases/ as Customer Required
Specification: DN40mm-DN300mm
Origin: China
HS Code: 8413709990
Model NO.: D
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump, Multistage Pump
Warranty: 1 Year
Drive: Electric Motor/ Diesel Engine
Voltage: 220V/380V/410V/460V/High Voltage
Frequeccy: 50Hz/60Hz
Color: as Customer Required
Sealing: Mechanical Seal/ Packing Seal
Material1: Cast Iron
Material2: Cast Steel
Material3: Stainless Steel
Material4: High Chrome
Trademark: DEPON
Transport Package: Plywood Cases/ as Customer Required
Specification: DN40mm-DN300mm
Origin: China
HS Code: 8413709990
Pressure Steam Bolier Feed Water Pump

Pressure Steam Bolier Feed Water Pump


Introduction:
Depon D series multistage water pump is a widely used system of high-pressure pump, run hot and cold water as a booster pumps in parallel water supply of the high-rise building, fire, boiler feed water and cooling water systems and a variety of irrigation fluid conveying. 

Type D pump can deliver water without solid particle or the liquid which the chemical and physical feature are similar with water and temperature is≤80ºC, it is suitable for delivering mater in mine and urban water project etc.

Type DG pump can deliver clean water without solid particle or the liquid which the chemical and physical feature are similar with water, and temperature is≤105ºC, it is suitable for delivering boiler feed water or heat water.

Type DM pump can deliver the neuter mineral water which solid particles percent≤1.5% (solid Dia.<0.5mm) and other similar sewage, the temperature of the liquid is ≤80ºC, it is suitable for steel works, mines, cities projects etc.

Type DF pump can deliver the corrosive liquid without solid particle, which temperature is from -20ºC~150ºC.

Type DY pump deliver oil or oil products without solid grain, viscosity≤120ct, range of temperature is from -20ºC~150ºC.

Inlet pressure of pumps is less than 0.6Mpa. 


Application:
Pressure Steam Bolier Feed Water Pump

 

Sectional Arrangement
1 Suction Casing
2 Diffuser
3 Stage Casing
4 Delivery Casing
5 Impeller of First-stage
6 Impeller
7 Balance Disc
8 Balance Ring
9 Stuffing Box Housing
10 Packing
11 Balance Sleeve
12 Packing Gland
13 O-ring
14 Bearing
15 Wearing Ring of First-stage
16 Wearing Ring
17 Diffuser Bush
18 Shaft
19 Shaft Sleeve
20 Balance Water Piping
21 Water Seal Piping
 
* Long distance water transferring
* Boiling water feeding and transferring
* Water system boosting
* Agricultural irrigation
* Mining water supply
* Fire fighting
* Offshore projects


Pump Performance:
Pressure Steam Bolier Feed Water Pump

Model Capacity 
(m3/h)
Head(m) Speed
 (rpm)
Motor Power
 (kw)
Impeller Dia
 (mm)
D/DG6-25*3 6.3 75 2950 5.5 138
D/DG6-25*5 6.3 125 2950 7.5 138
D/DG6-50*4 6.3 200 2950 18.5 198
D/DG6-50*6 6.3 300 2950 30 198
D/DG6-80*3 6.3 240 2950 18.5 235
D/DG12-25*4 12.5 100 2950 11 146
D/DG12-50*6 12.5 300 2950 30 273
D/DG12-80*4 12.5 320 2950 45 235
D/DG25-30*3 25 90 2950 15 160
D/DG25-50*5 25 250 2950 37 196
D/DG46-30*5 46 150 2950 37 162
D/DG46-50-7 46 350 2950 90 210
D/DG85-67*4 85 268 2950 110 235
D/DG85-67*8 85 536 2950 220 235
D/DG120-50*5 120 250 2950 132 213
D/DG150-30*8 150 240 2950 160 172
D/DG150-100*6 150 600 2950 400 289
D/DG200-100*6 200 600 2950 560 290
D/DG280-65*6 280 390 1480 500 430
D/DG360-40*8 360 320 1480 500 360
D/DG450-60*8 450 480 1480 900 430
D/DG550-50*9 550 450 1480 1000 430
D/DG580-70*9 580 630 1480 1600 473
D/DG600-60*10 600 600 1480 1400 455
D/DG720-60*9 720 540 1480 1600 450
D/DG740-80*6 740 480 1480 1600 493

For reference only, more details please contact us!

Construction & Material:
 

Pump Part D Series DM Series DG/DY Series DF Series
Suction Casing HT250 ZGCr17Mo2-CuR HT250 Cast Steel or 
cast stainless steel
Stage Casing HT250 ZGCr17Mo2-CuR HT250 Cast Steel or 
cast stainless steel
Discharge Casing HT250 ZGCr17Mo2-CuR HT250 Cast Steel or 
cast stainless steel
Impeller HT250 KmTbCr15Mo3 HT250 Cast Steel or 
cast stainless steel
Diffuser HT250 KmTbCr15Mo3 HT250 Cr Steel
Shaft C45 C45 C45 Cast Steel or 
cast stainless steel
Balance Disc ZQAI9-4 ZGCr17Mo2-CuR ZQAI9-4 Cast Steel or 
cast stainless steel


Pressure Steam Bolier Feed Water Pump
Pressure Steam Bolier Feed Water Pump

FAQ

1. What is your product range?
A: centrifugal pump. Centrifugal pump includes slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, self-priming pump and diesel engine pump.

2. What's your MOQ, payment term and lead time?
A: MOQ for centrifugal pump is 1set, MOQ for conveyor belt is 100cbm.
Payment Term: T/T, L/C, Western Union, Paypal and Trade Assurance.
Lead time: in general 7 working days for slurry pump, 15working days for water pump.

3. What information should I let you know if I want to get a quotation:
A: Pump capacity, pump head, medium, medium temperature, pump material, quantity, if possible, please also provide the pump model you are using now, price will be calculated as per the pump model, if not, we will recommend relevant product for reference.

4. If I put a bigger motor on my pump, will it pump more?
A: No. The amount of water and the pressure (head) that a centrifugal pump process is related to the rotational speed, impeller diameter and size of the impeller vanes.

5. Do you impact the finished product?
A: Yes, each batch of production and finished product will be quality checked strickly before delivering, testing report or video can be sent to clients for reference.

6. How do you ship the finished product?
A: By sea, By air, By international express.

Inquiry of Pump

1. Head: _____meter
2. Capacity: _____m3/h
3. Liquid media: ______
4. PH: _____
5. Concentration: ____%
6. Temperature: _____degree
7. Specific density; ______kg/m3



Contract Us:
Shirley She
Tel: +86-312-6795175
Fax: +86-312-3085383
Mob: +86-13932278621

 
Pressure Steam Bolier Feed Water Pump

Pressure Steam Bolier Feed Water Pump


Introduction:
Depon D series multistage water pump is a widely used system of high-pressure pump, run hot and cold water as a booster pumps in parallel water supply of the high-rise building, fire, boiler feed water and cooling water systems and a variety of irrigation fluid conveying. 

Type D pump can deliver water without solid particle or the liquid which the chemical and physical feature are similar with water and temperature is≤80ºC, it is suitable for delivering mater in mine and urban water project etc.

Type DG pump can deliver clean water without solid particle or the liquid which the chemical and physical feature are similar with water, and temperature is≤105ºC, it is suitable for delivering boiler feed water or heat water.

Type DM pump can deliver the neuter mineral water which solid particles percent≤1.5% (solid Dia.<0.5mm) and other similar sewage, the temperature of the liquid is ≤80ºC, it is suitable for steel works, mines, cities projects etc.

Type DF pump can deliver the corrosive liquid without solid particle, which temperature is from -20ºC~150ºC.

Type DY pump deliver oil or oil products without solid grain, viscosity≤120ct, range of temperature is from -20ºC~150ºC.

Inlet pressure of pumps is less than 0.6Mpa. 


Application:
Pressure Steam Bolier Feed Water Pump

 

Sectional Arrangement
1 Suction Casing
2 Diffuser
3 Stage Casing
4 Delivery Casing
5 Impeller of First-stage
6 Impeller
7 Balance Disc
8 Balance Ring
9 Stuffing Box Housing
10 Packing
11 Balance Sleeve
12 Packing Gland
13 O-ring
14 Bearing
15 Wearing Ring of First-stage
16 Wearing Ring
17 Diffuser Bush
18 Shaft
19 Shaft Sleeve
20 Balance Water Piping
21 Water Seal Piping
 
* Long distance water transferring
* Boiling water feeding and transferring
* Water system boosting
* Agricultural irrigation
* Mining water supply
* Fire fighting
* Offshore projects


Pump Performance:
Pressure Steam Bolier Feed Water Pump

Model Capacity 
(m3/h)
Head(m) Speed
 (rpm)
Motor Power
 (kw)
Impeller Dia
 (mm)
D/DG6-25*3 6.3 75 2950 5.5 138
D/DG6-25*5 6.3 125 2950 7.5 138
D/DG6-50*4 6.3 200 2950 18.5 198
D/DG6-50*6 6.3 300 2950 30 198
D/DG6-80*3 6.3 240 2950 18.5 235
D/DG12-25*4 12.5 100 2950 11 146
D/DG12-50*6 12.5 300 2950 30 273
D/DG12-80*4 12.5 320 2950 45 235
D/DG25-30*3 25 90 2950 15 160
D/DG25-50*5 25 250 2950 37 196
D/DG46-30*5 46 150 2950 37 162
D/DG46-50-7 46 350 2950 90 210
D/DG85-67*4 85 268 2950 110 235
D/DG85-67*8 85 536 2950 220 235
D/DG120-50*5 120 250 2950 132 213
D/DG150-30*8 150 240 2950 160 172
D/DG150-100*6 150 600 2950 400 289
D/DG200-100*6 200 600 2950 560 290
D/DG280-65*6 280 390 1480 500 430
D/DG360-40*8 360 320 1480 500 360
D/DG450-60*8 450 480 1480 900 430
D/DG550-50*9 550 450 1480 1000 430
D/DG580-70*9 580 630 1480 1600 473
D/DG600-60*10 600 600 1480 1400 455
D/DG720-60*9 720 540 1480 1600 450
D/DG740-80*6 740 480 1480 1600 493

For reference only, more details please contact us!

Construction & Material:
 

Pump Part D Series DM Series DG/DY Series DF Series
Suction Casing HT250 ZGCr17Mo2-CuR HT250 Cast Steel or 
cast stainless steel
Stage Casing HT250 ZGCr17Mo2-CuR HT250 Cast Steel or 
cast stainless steel
Discharge Casing HT250 ZGCr17Mo2-CuR HT250 Cast Steel or 
cast stainless steel
Impeller HT250 KmTbCr15Mo3 HT250 Cast Steel or 
cast stainless steel
Diffuser HT250 KmTbCr15Mo3 HT250 Cr Steel
Shaft C45 C45 C45 Cast Steel or 
cast stainless steel
Balance Disc ZQAI9-4 ZGCr17Mo2-CuR ZQAI9-4 Cast Steel or 
cast stainless steel


Pressure Steam Bolier Feed Water Pump
Pressure Steam Bolier Feed Water Pump

FAQ

1. What is your product range?
A: centrifugal pump. Centrifugal pump includes slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, self-priming pump and diesel engine pump.

2. What's your MOQ, payment term and lead time?
A: MOQ for centrifugal pump is 1set, MOQ for conveyor belt is 100cbm.
Payment Term: T/T, L/C, Western Union, Paypal and Trade Assurance.
Lead time: in general 7 working days for slurry pump, 15working days for water pump.

3. What information should I let you know if I want to get a quotation:
A: Pump capacity, pump head, medium, medium temperature, pump material, quantity, if possible, please also provide the pump model you are using now, price will be calculated as per the pump model, if not, we will recommend relevant product for reference.

4. If I put a bigger motor on my pump, will it pump more?
A: No. The amount of water and the pressure (head) that a centrifugal pump process is related to the rotational speed, impeller diameter and size of the impeller vanes.

5. Do you impact the finished product?
A: Yes, each batch of production and finished product will be quality checked strickly before delivering, testing report or video can be sent to clients for reference.

6. How do you ship the finished product?
A: By sea, By air, By international express.

Inquiry of Pump

1. Head: _____meter
2. Capacity: _____m3/h
3. Liquid media: ______
4. PH: _____
5. Concentration: ____%
6. Temperature: _____degree
7. Specific density; ______kg/m3



Contract Us:
Shirley She
Tel: +86-312-6795175
Fax: +86-312-3085383
Mob: +86-13932278621

 

Multi-function Artificial Grass

Multifunctional artificial grass is a synthetic turf material, usually made of polypropylene, polyethylene, polyurethane and other materials. It has the following characteristics:


1. Strong durability: Multi-functional artificial grass is specially treated to withstand high intensity use and various weather conditions, and is not easy to wear and fade.


2. Good environmental protection: compared with natural grass, multi-functional artificial grass does not need to use pesticides and fertilizers, and will not cause pollution to soil and water.


3. Easy maintenance: Multi-functional artificial grass does not need watering, pruning and fertilizing, and only needs regular cleaning to keep it beautiful.


4. Strong versatility: multi-functional artificial grass can be used in a variety of occasions, such as indoor and outdoor decoration, sports venues, public places, etc.


5. High safety: Multifunctional artificial grass surface is smooth, not easy to slip, more safe for athletes and children.


In short, multi-functional artificial grass is an excellent lawn material, with durable, environmental protection, simple maintenance, multi-functional and other advantages, suitable for various occasions.

Multi-Function Artificial Grass,Artificial Grass For Pets,Artificial Turf For Sporting Fields,Grass For Backyard Landscaping

MCG Industry Group Inc. , https://www.jsmccp.com

Posted on