Yesterday morning, 200 electric taxis from the Tongzhou District Xiao Temple charging station, officially on the road operation. The nation's largest and most chargeable Tongzhou Xiao Sanmiao electric taxi charging station is also enabled at the same time, Tongzhou became the eighth after Beijing electric taxi demonstration operations of Yanqing, Huairou, Miyun, Changping, Pinggu, Fangshan, Daxing District.
Electric taxi starting price of 10 km within 10 km, more than 3 km 2 yuan per kilometer. "This black car near the starting price is 15 to 20 yuan, 10 yuan regular start of the electric taxi, which can certainly be welcomed by Tongzhou citizens." Master Zhou told reporters.
on site:
Charging a car easy
Yesterday morning, the reporter rushed to the east side of the Little Golden Temple charging station. At a glance, 210 spacious parking spaces neatly parked a lot of body under the orange, the upper is a white hatchback electric taxi, which is produced by the Beijing New Energy Co., Ltd. Beiqi New Energy E150EV models. Electric taxi with ordinary hatchback shape is not much difference, the roof is the blue dome light, wrote "Tongzhou" word, the door of the tower shadow and the intersection of the Five Rivers symbol shows the cultural characteristics of Tongzhou.
16,000 square meters of parking, behind each parking space, there is a distance from the phone booth like charging pile. Approaching the charging pile, driver Li Master is charging his car. I saw Master Li took out from the car an orange pipe, one plugged into the left side of the charging pile power connector, the other end is inserted into the car at the back of the dome lid, looks like to the car plus "gasoline ". "Look, the power of the red light above, indicating that you can start charging." Then, Master Li come up with a charging card.
"Do not worry, the card can be activated." Master Li inserts the card into the slot on the front of the charging post, and the LCD shows "Please enter the password." Each charging pile has A and B charging ports on each side, after inputting the password, Master Li chooses to "manually charge" on port A, and the green light above the LCD screen is on and charging begins. Reporter Minato past look, the LCD screen shows the charging voltage, current, power, amount, charging time and so on.
Zheng Hejia charging station owners introduction, the station can also provide 210 electric taxi charging service. DC fast charge half an hour can quickly charge 80% of the charge, AC slow charge 6 to 8 hours to allow the battery fully charged. Fully charged electric taxi can travel 160 kilometers, the maximum speed of up to 125 kilometers per hour.
Experience: Quiet Fast Lower cost
"This car's performance is good, start particularly quiet, power is quite enough." Master Zhou chef told reporters that he had opened an ordinary taxi, pull the town every day to work, from morning till night, very hard. The electric taxis only operate in the vicinity of Tongzhou's "entrance to the home", which means they are cheaper and have higher income. "The price is cheap ah!" Zhou master forget the account, each power to 0.814 yuan, a fully charged 25 degrees, you need 20 yuan, can open 160 km. However, the original car to open their own car to 100 kilometers fuel consumption 7 liters calculation, the same open 160 km, the fuel must reach nearly 90 yuan.
Yesterday morning, the reporter took an electric taxi experience one. In the cab, the gauge on the dashboard turns into a meter. In addition to neutral and reverse gear, only the economy and power of two forward gear, as long as the pre-set, halfway there will be no shift. After the vehicle started up, the speed of the car quickly climbed to 60 km / h, speeding fast. The main thing is, the car interior space, spacious and comfortable seats, driving the engine noise is particularly small, but can not smell gasoline.
"The biggest advantage of electric taxis compared to traditional vehicles is that the exhaust gas has reached zero emission and is more environmentally friendly," said the municipal power company official. It is estimated that only 200 electric taxis Tongzhou District, an annual total of 2,400 tons of carbon dioxide emissions can be reduced.
Accounting:
Energy-saving emission reduction up to 10,000 tons
As of yesterday, the city built a total of eight electric taxi charging stations, located in eight suburban counties, which can provide charging services for 950 electric taxis at the same time. It is estimated that a total of 11,400 tons of carbon dioxide emission reductions will be realized each year.
According to the municipal power company estimates, as of the end of August this year, Beijing City, Charging electricity service network has 16,88 various types of electric vehicles to provide 288500 times charging and discharging services, charging 10,768,000 kWh, service vehicle mileage of 16,672,000 Km, to achieve 7404 tons of carbon dioxide emission reduction.
It is understood that in Beijing, 65 electric car charging and discharging stations have been completed and the service network covers all districts and counties in Beijing. From the service object classification, including bus substation, taxi charging station, sanitation truck charging station, passenger car charging station and integrated station five types of sites, a total of 1274 charging pile Taiwan, to meet the 3500 charge and discharge of electric vehicles demand . It is estimated that by the end of 2017, the city's new energy and clean energy vehicles will reach 200,000 vehicles.
"Scattered charging pile is also siting, each can hold at least 5 charging pile for 10 vehicles at the same time charging." Tongzhou power supply company marketing director Dong Lixin introduction, according to Beijing Science and Technology Planning, in the future For a period of time, the power company will also build a number of DC charging posts in batches in hospitals, shopping malls and subways along the Tongzhou District as a fast recharging facility to form a service network for regional charging so that the electric taxi can be recharged more conveniently and conveniently Operational efficiency.
Q: Can we get out of the black car
Tongzhou District yesterday formally operated 200 electric taxi pricing for 10 yuan within 3 km, more than 3 km 2 yuan per kilometer. Reporter self-service taxi
Cobalt-based alloy powders are commonly used in plasma transfer arc welding (PTAW) due to their excellent high-temperature properties and resistance to wear and corrosion. These alloys are typically composed of cobalt as the base metal, with various alloying elements such as chromium, tungsten, nickel, and carbon added to enhance specific properties.
The use of cobalt-based alloy powders in PTAW offers several advantages, including:
1. High-temperature strength: Cobalt-based alloys exhibit excellent strength and resistance to deformation at elevated temperatures, making them suitable for welding applications that involve high heat.
2. Wear resistance: These alloys have a high hardness and resistance to wear, making them ideal for welding applications where the welded parts are subjected to abrasive or erosive conditions.
3. Corrosion resistance: Cobalt-based alloys offer good resistance to corrosion, making them suitable for welding applications in aggressive environments, such as those involving chemicals or saltwater.
4. Thermal conductivity: Cobalt-based alloys have good thermal conductivity, allowing for efficient heat transfer during welding and reducing the risk of heat-affected zone (HAZ) defects.
5. Compatibility with other materials: Cobalt-based alloys can be easily welded to a wide range of base metals, including stainless steels, nickel alloys, and other cobalt-based alloys, providing versatility in welding applications.
To use cobalt-based alloy powders for PTAW, the powder is typically fed into the plasma arc using a powder feeder. The powder is then melted by the high-temperature plasma arc and deposited onto the workpiece, forming a weld bead. The specific welding parameters, such as arc current, travel speed, and powder feed rate, will depend on the specific alloy and application requirements.
It is important to note that the selection of the cobalt-based alloy powder should be based on the specific welding application and the desired properties of the final weld. Different cobalt-based a
Co Powder,Cobalt 6 Powder,Cobalt 12 Powder,Cobalt 21 Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.lyshieldcutters.com