Special Swivel Car Seat S-Lift for Disabled and Elder

S-LIFT Lifting Seat
1. Introduction
S-LIFT Series turning seat is a kind of equipment to make easy entrance of cars, buses, taxi, ambulance and etc. It can work stable, reliable and safe. Loading capacity can be 150KG.
It is operated by remote control. Turning seat can stop at any position you want by press keys on the remote control. 

² Description
Ø This seat makes easy entrance of cars, buses, taxi, ambulance and etc.
Ø Easy operation and reliable function;
Ø It is operated by driver or user;
Ø Working voltage can be 12V or 24V;
Ø Water-proof connectors;
Ø There is warning sound during working;
Ø Working noise is less than 70dB;
Ø Every turning seat has SN which is for track and make after-sales easy;

² Installation
Ø Wholly assembled and easy installation
Ø At the front seat or middle seat of MPV
Ø Put seat 50mm near door, and distance between seat front end and door sheet should be over 280mm

² Application
Ø MPV, van, minivan, SUV;
Ø Handicapped car;
Ø Ambulance;
 

1. Technical Infomation 
UNIT: mm
2. Technical Function
Ø Volt: 12-24V 
Ø Generally, max electricity is 12A (during extending and stowing)
Ø Time for turing:5s
Ø Time for moving forward: 14s
Ø Time for lowering down: 30s
Ø Time for lifting: 50s
Ø Time for moving backward: 14s;
Ø Testing weight: 150kg;
Ø Safety grade: IP67;
Ø Safety loading capacity: 150kg;
Ø Noise: less than 70dB;
Ø Rotating angle: 0-120°
Ø Own weight: 68 KG
Ø Operation: remote control or operating switch
 

3. Safety Function
Ø Surface of seat step is anti-skip; 
Ø There is warning sound during seat working; 
Ø During seat working, if there is some barrier, press any key, working will stop; press key again, working will start again;
Ø This turning seat has high sensibility; 

 



S-LIFT Lifting Seat
1. Introduction
S-LIFT Series turning seat is a kind of equipment to make easy entrance of cars, buses, taxi, ambulance and etc. It can work stable, reliable and safe. Loading capacity can be 150KG.
It is operated by remote control. Turning seat can stop at any position you want by press keys on the remote control. 

² Description
Ø This seat makes easy entrance of cars, buses, taxi, ambulance and etc.
Ø Easy operation and reliable function;
Ø It is operated by driver or user;
Ø Working voltage can be 12V or 24V;
Ø Water-proof connectors;
Ø There is warning sound during working;
Ø Working noise is less than 70dB;
Ø Every turning seat has SN which is for track and make after-sales easy;

² Installation
Ø Wholly assembled and easy installation
Ø At the front seat or middle seat of MPV
Ø Put seat 50mm near door, and distance between seat front end and door sheet should be over 280mm

² Application
Ø MPV, van, minivan, SUV;
Ø Handicapped car;
Ø Ambulance;
 

1. Technical Infomation 
UNIT: mm
2. Technical Function
Ø Volt: 12-24V 
Ø Generally, max electricity is 12A (during extending and stowing)
Ø Time for turing:5s
Ø Time for moving forward: 14s
Ø Time for lowering down: 30s
Ø Time for lifting: 50s
Ø Time for moving backward: 14s;
Ø Testing weight: 150kg;
Ø Safety grade: IP67;
Ø Safety loading capacity: 150kg;
Ø Noise: less than 70dB;
Ø Rotating angle: 0-120°
Ø Own weight: 68 KG
Ø Operation: remote control or operating switch
 

3. Safety Function
Ø Surface of seat step is anti-skip; 
Ø There is warning sound during seat working; 
Ø During seat working, if there is some barrier, press any key, working will stop; press key again, working will start again;
Ø This turning seat has high sensibility; 

 

CNC Turning Parts

CNC turning is mainly used to process workpieces of revolving bodies, but sometimes it is also possible to clamp workpieces by customizing fixtures to process non-revolving products, such as planes, grooves, etc. Compared with manual turning and automatic turning, CNC turning has the characteristics of high efficiency and high precision. Moreover, with the development of science and technology, the requirements for workpieces are getting higher and higher, and more complex and higher precision workpieces need to be processed. In order to deal with such workpieces, multi-axis linkage CNC lathes have appeared, and multi-axis linkage turning machining usage is becoming more and more common.

SCZY has multiple three-axis CNC lathes, as well as multiple 4-axis linkage and 5-axis linkage CNC lathes, we can process complex-shaped rotating parts, usually the tolerance can reach ±0.01mm (specifically, it depends on the product material and structure. ), if we need better precision requirements, we can cooperate with the grinding machine for finishing, which can achieve a high precision of ±0.002mm. Our processing range includes the processing of stainless steel, alloy steel, special steel, ordinary steel, aluminum, copper, plastic and so on. Here are some CNC turning products we have processed:

CNC Turning Services, CNC Turned Parts, CNC Turning Machining, Precision Turing Parts, CNC Turning

Shenzhen SCZY Technology Co.,Ltd , https://www.szsccasting.com