Water requirements
When the high-pressure cleaning vehicle uses a river ditch or a pond as a water source, pay attention that all the ends of the suction pipe do not enter the water. In order to avoid inhaling stones or more sand and drift debris, the suction pipe end is generally provided with a filtering device, and it is forbidden to remove the filtering device during the water absorption. If the water source is shallow, it is necessary to dig up the water absorption area in advance so as to ensure that it does not contain impurities and air.
Add water diversion
Every time the centrifugal pump absorbs water, a certain amount of water must be added to the pump. After the addition, the water inlet must be closed. When the self-priming pump is used for the first time, it is necessary to add water, and it is unnecessary to add water afterwards.
Inlet pipe must be vacuumed
The water inlet system must maintain a certain degree of vacuum before it can suck water into the tank. The inlet pipe system must be sealed reliably, the hose can not be damaged, the hard pipe can not have cracks, otherwise it will have a phenomenon of air leakage, which will result in the situation that it cannot suck water.
Parking stall
Before the high-pressure cleaning vehicle is absorbing water or before the operation, the power take-off device must be stopped while parking.
Winter water
Before the advent of winter, the water in the pumps and pipes should be vented to prevent freezing. The northern part of the country is generally no longer under construction during the severe winter. Therefore, after the construction is completed, the water in the pump and the water pipe will be drained immediately to prevent future problems.
Regular sewage
The storage tank of the high-pressure cleaning vehicle is provided with a sewage pipe, and the inlet of the pipe is the lowest point of the water tank. After a period of use, the discharge pipe switch should be opened periodically to remove the accumulated debris from the tank until the water becomes clear.
When the high-pressure cleaning vehicle uses a river ditch or a pond as a water source, pay attention that all the ends of the suction pipe do not enter the water. In order to avoid inhaling stones or more sand and drift debris, the suction pipe end is generally provided with a filtering device, and it is forbidden to remove the filtering device during the water absorption. If the water source is shallow, it is necessary to dig up the water absorption area in advance so as to ensure that it does not contain impurities and air.
Add water diversion
Every time the centrifugal pump absorbs water, a certain amount of water must be added to the pump. After the addition, the water inlet must be closed. When the self-priming pump is used for the first time, it is necessary to add water, and it is unnecessary to add water afterwards.
Inlet pipe must be vacuumed
The water inlet system must maintain a certain degree of vacuum before it can suck water into the tank. The inlet pipe system must be sealed reliably, the hose can not be damaged, the hard pipe can not have cracks, otherwise it will have a phenomenon of air leakage, which will result in the situation that it cannot suck water.
Parking stall
Before the high-pressure cleaning vehicle is absorbing water or before the operation, the power take-off device must be stopped while parking.
Winter water
Before the advent of winter, the water in the pumps and pipes should be vented to prevent freezing. The northern part of the country is generally no longer under construction during the severe winter. Therefore, after the construction is completed, the water in the pump and the water pipe will be drained immediately to prevent future problems.
Regular sewage
The storage tank of the high-pressure cleaning vehicle is provided with a sewage pipe, and the inlet of the pipe is the lowest point of the water tank. After a period of use, the discharge pipe switch should be opened periodically to remove the accumulated debris from the tank until the water becomes clear.
Shackles are a versatile tool for connecting lifting slings, wire rope, chain, and rope - these links are essential for a number of rigging, lifting, pulling, and hoisting applications.
Because they come in a wide variety of styles and types, choosing the right one for the job can be confusing.
We've outlined some of the basics below. If you have any questions, contact one of our product specialists for more information.
Shackle 2 Sets,Recovery Lifting Shackles,Black Snap Shackle,Lifting Slings And Shackles
WINNERLIFTING SAFETY EQUIPMENT CO., LTD. , https://www.winnerslackline.com