Interpretation of the four elements that affect the light extraction efficiency of LED packages

Power LEDs have to enter the field of lighting to achieve daily lighting in the home. There are still many problems to be solved, the most important of which is luminous efficiency. Conventional LEDs are generally bracket type, encapsulated in epoxy resin, with low power, and the overall luminous flux is not large, and the high brightness can only be used as some special lighting. With the development of LED chip technology and packaging technology, in response to the demand for high-light flux LED products in the lighting field, power LEDs have gradually entered the market. The power type LED generally has a light emitting chip placed on a heat sink, and an optical lens is assembled thereon to achieve a certain optical spatial distribution, and the lens is filled with a low stress flexible silicone. Power LEDs have to enter the field of lighting to achieve daily lighting in the home. There are still many problems to be solved, the most important of which is luminous efficiency. At present, the highest lumen efficiency reported by power LEDs on the market is around 50 lm/W, which is far from the requirements of household daily lighting. In order to improve the luminous efficiency of power LED, on the one hand, the efficiency of the light-emitting chip needs to be improved; on the other hand, the packaging technology of power LED needs to be further improved, starting from structural design, material technology and process technology, and improving the product. Package light extraction efficiency. Package Elements Affecting Light Extraction Efficiency 1. Heat Dissipation Technology For light-emitting diodes composed of PN junctions, when forward current flows from the PN junction, the PN junction has heat loss, which passes through the adhesive, potting material, heat sink, etc. Radiation into the air, in this process each part of the material has a thermal impedance that blocks the heat flow, that is, thermal resistance, which is a fixed value determined by the size, structure and material of the device. Let the thermal resistance of the LED be Rth (°C/W) and the heat dissipation power be PD(W). At this time, the PN junction temperature rise due to the heat loss of the current is: T(°C)=RthPD. PN junction Temperature is: TJ=TA RthPD where TA is the ambient temperature. As the junction temperature rises, the probability of PN junction luminescence recombination decreases, and the brightness of the LED decreases. At the same time, due to the increase in temperature rise due to heat loss, the brightness of the LED will no longer continue to increase proportionally with the current, indicating thermal saturation. In addition, as the junction temperature rises, the peak wavelength of the luminescence will also drift toward the long wavelength, about 0.2-0.3 nm/°C, which is for the white LED obtained by mixing the YAG phosphor coated with the blue chip. Drift causes a mismatch with the excitation wavelength of the phosphor, thereby reducing the overall luminous efficiency of the white LED and causing a change in the white color temperature. For power LEDs, the drive current is generally several hundred milliamperes or more, and the current density of the PN junction is very large, so the temperature rise of the PN junction is very obvious. For packaging and applications, how to reduce the thermal resistance of the product, so that the heat generated by the PN junction can be dissipated as soon as possible, not only can improve the saturation current of the product, improve the luminous efficiency of the product, but also improve the reliability and life of the product. . In order to reduce the thermal resistance of the product, the choice of packaging materials is particularly important, including heat sinks, adhesives, etc., the thermal resistance of each material is low, that is, the thermal conductivity is required to be good. Secondly, the structural design should be reasonable, the thermal conductivity between the materials should be continuously matched, and the thermal connection between the materials is good, avoiding the heat dissipation bottleneck in the heat conduction channel and ensuring the heat is dissipated from the inner to the outer layer. At the same time, it is necessary to ensure that the heat is dissipated in time according to the pre-designed heat dissipation channel. 2. Selection of Filler According to the law of refraction, when light is incident from the optically dense medium to the light-diffusing medium, when the incident angle reaches a certain value, that is, greater than or equal to the critical angle, full emission occurs. In the case of a GaN blue chip, the refractive index of the GaN material is 2.3. When light is emitted from the inside of the crystal to the air, according to the law of refraction, the critical angle is 0 = sin - 1 (n2 / n1) where n2 is equal to 1, that is, air The refractive index, n1 is the refractive index of GaN, from which the critical angle 0 is calculated to be about 25.8 degrees. In this case, the light that can be emitted is only the light in the solid angle of the space of the incident angle of 25.8 degrees. It is reported that the external quantum efficiency of the current GaN chip is about 30-40, and therefore, due to the internal absorption of the chip crystal, it can be emitted. The proportion of light outside the crystal is small. It is reported that the external quantum efficiency of GaN chips is currently around 30-40. Similarly, the light emitted by the chip is transmitted through the encapsulating material to the space, and the effect of the material on the light extraction efficiency is also considered. Therefore, in order to improve the light extraction efficiency of the LED product package, it is necessary to increase the value of n2, that is, to increase the refractive index of the packaging material, so as to increase the critical angle of the product, thereby improving the package luminous efficiency of the product. At the same time, the encapsulation material absorbs light less. In order to increase the proportion of the emitted light, the shape of the package is preferably arched or hemispherical so that when the light is directed from the encapsulating material to the air, it is almost perpendicularly incident on the interface, so that no total reflection is produced. 3. Reflection treatment There are two main aspects of reflection treatment. One is the reflection treatment inside the chip, and the other is the reflection of the light by the encapsulation material. The reflection treatment of the inside and the outside is used to increase the proportion of the light emitted from the inside of the chip. The internal absorption of the chip improves the luminous efficiency of the finished power LED. In terms of packaging, power LEDs usually mount power chips on metal brackets or substrates with reflective cavities. Bracket-type reflective cavities generally use electroplating to improve reflection, while substrate-type reflective cavities are generally polished. In the mode, the plating treatment is carried out under conditions, but the above two treatment methods are affected by the precision and process of the mold, and the reflective cavity after the treatment has a certain reflection effect, but it is not ideal. At present, the substrate-type reflective cavity is made in China, because the polishing precision is insufficient or the metal plating layer is oxidized, the reflection effect is poor, which causes a lot of light to be absorbed after being incident on the reflection area, and cannot be reflected to the light-emitting surface according to the intended target, thereby resulting in the final The light extraction efficiency after packaging is low. Through various researches and experiments, we have developed a reflection treatment process using organic material coatings with independent intellectual property rights. Through this process, the light reflected into the carrier cavity is absorbed very little, and most of them can be used. The light hitting it is reflected to the light exiting surface. The light extraction efficiency of the processed product can be increased by 30-50 compared with that before the treatment. Our current 1W white light power LED can achieve 40-50lm/W (the test result on the remote PMS-50 spectral analysis test instrument). Get a good packaging effect. 4. Phosphor Selection and Coating For white power LEDs, the improvement in luminous efficiency is also related to phosphor selection and processing. In order to improve the efficiency of the phosphor to stimulate the blue chip, firstly, the selection of the phosphor should be appropriate, including the excitation wavelength, the particle size, the excitation efficiency, etc., and comprehensive evaluation is required, taking into account various performances. Secondly, the coating of the phosphor should be uniform, preferably the thickness of the glue layer of each light-emitting surface of the light-emitting chip is uniform, so as to avoid local light being unable to be emitted due to uneven thickness, and the quality of the spot can be improved. Good thermal design has a significant effect on improving the luminous efficiency of power LED products, and is also a prerequisite for ensuring product life and reliability. The well-designed light exit channel, which focuses on the structural design, material selection and process processing of the reflective cavity, the filling glue, etc., can effectively improve the light extraction efficiency of the power LED. For power-type white LEDs, the choice of phosphor and process design are also critical to the improvement of the spot and the improvement of luminous efficiency.

High Speed Winding Machine

High Speed Winding Machine,Groove Drum Winding Machine,Cheese Winding Machine,Sewing Thread Winding Machine

JIEPAI MACHINERY , https://www.jyjiepai.com

Posted on