Drying equipment industry is engaged in the development of small businesses, new products, and perfect introduction of new products is mainly to imitate each other. It is suggested to develop advanced technology and improve product quality. Compared with developed countries in the world, drying equipment technology in China has a certain gap in the same industry. The current market is dominated by products with lower technological content. With China's accession to the WTO, there will be more international counterparts entering the domestic market, and with increasingly serious international competition, we will face enormous competitive pressures.
It is expected that during the “10th Five-Year Plan†period, China’s drying equipment will have a market share of 90% in the domestic market. At present, there are two approaches to regional problems and technical innovation capabilities where performance is problematic. The majority of the enterprises in the drying equipment industry in China's drying equipment industry have gradually generated early-stage enterprises, relatively concentrated geographical locations, and serious defects in the personnel structure. So far, the enterprises are mainly distributed in Jiangsu, Zhejiang, Shanghai, Liaoning, and black. These enterprises account for almost 50% of the total number of the entire industry. In sharp contrast, some regions do not have dry equipment manufacturing in China. Business. In a highly competitive industry, some companies focus on immediate results, do not need any systematic development, improve the overall quality, and progress slowly, which seriously hampers the normal development of the industry.
Although there are many of our dryer equipment dryers, advanced countries still have far fewer industries than this consensus. How to improve the level of drying technology in China's accession to the World Trade Organization to deal with competition from all parties is the most thought of the dry industry. Combine expert opinions with the following suggestions on the water scarcity situation in China.
Increased user identification capabilities, drying equipment
Drying plant in China so much, and can be based on the market. It should be said that a large number of drying equipment in the factory production equipment technology and certain differences, the quality of the product, but why survive, it has the ability to establish a good relationship with other user groups. Drying equipment and other general machinery equipment, in addition to the quality of the appearance of different factors that indicate the technical content, the use of effects can not find the user. Drying due to fewer users is able to identify an objective, inferior dry plant that provides living space. Promote market penetration and purify dry knowledge, integration can play an active role in the market. Only in this way can the manufacturer survive and develop in the market where the fittest survives. Although the drying equipment is a special product rather than the user can not determine their own advantages and disadvantages in selecting a drying equipment drying equipment to deal with the following plants should be investigated.
(1) A visit to the factory plant research should first understand whether or not there is any material in the plant laboratory equipment, and the experimental results of the experimental data. Seriously listening to the phenomenon of plant experiments. The model needs to know if there is a manufacturing capacity of the processing plant means that it can ask to listen to the processing method in the factory type declaration.
(2) The level of factory performance depends to a certain extent on fulfilling its performance under normal conditions, with stronger capabilities to equipment manufacturers. Because by improving the production equipment technology. If it is the first time to create the model must be careful when the user's mature technology should seriously argue.
(3) Reliable drying equipment and maintenance to keep users from using the process sometimes difficult to solve this problem. Some common non-consumable parts factories can provide users with permanent technical advice, and the parts suppliers must consider when selecting drying equipment. Respond to other users to visit the factory in order to understand business reputation.
(4) The model mentioned earlier in the same study as the drying process during the amplification process will also appear in this issue in one or another way. Investigate whether there are user requirements, experience, and specifications for the same model of the manufacturer. If the accumulated experience of the equipment is relatively high success rate in this area.
(5) Examine the same or similar materials for further study, if drying the best plant material is dry, provide the same experience. This can improve the credibility of the project. Despite this kind of drying is very professional subjects non-professionals are hard to master in a short period of time. If possible, the best access project to hire expert quality dry options can enhance reliability of the plant equipment.
Strengthening basic research work
For many years, domestic drying equipment was mainly equipment, lacking the characteristics of imitation, and they themselves lacked competitiveness in the international market. First of all, according to the level of drying equipment drying technology is the current drying equipment manufacturers have created a lot of research, development of less dry, but technical staff. Drying equipment and some foreign companies engaged in technological development of some droughts and even more than some manufacturing personnel have been fighting for high technology in the market. If you want to have some professional standards that are highly competitive at home and abroad, refer to a complete test and development base. An effective way is to establish an integrated research and production institution, and the production of scientific research departments at the same time again to support research and production enterprises to improve the level of skills of dry goods in order to increase the technical content and production potential. The main points of technical development in the process are the following:
(1) Strengthen basic research on basic theory The basis of the research is that the development of new technologies is not only to strengthen the drying technology in the field of basic research, the continuous development of drying, and the development of drying technology to promote the progress of drying equipment. The basic research of a fully controlled basic research laboratory equipment should be established at our universities and research institutes to dry bases. The in-depth study of the mechanism, technological development, and thus laid the theoretical foundation, such a drying equipment in China to take a gradual approach to independent innovation.
(2) The physical properties of the research materials cannot be separated from the characteristics and requirements of the dry materials. Due to the different nature of the material, drying equipment will constitute a complex and versatile structural machine. For those who have been industrialized mechanisms, the structure of drying equipment and drying equipment is not difficult to grasp more difficult adjustments is the specific structure of the material to meet the requirements of the material drying. Drying equipment and technicians are more than factory machinery and equipment, school-based professional drying equipment, they are often regarded as a purely mechanical product. The limitations of professional teaching materials, which make them relatively neglected physical defects of the material nature of the resulting equipment are not ideal. Therefore, successful machine design is first and foremost a correct understanding of material and mechanical design is reasonable. Therefore, the amount of drying equipment design should focus on the study of the physical properties of the material.
(3) The automatic low-level automation of drying equipment is controlled by a common problem behind. It is not difficult to solve the control problem with the current degree of automation of the drying equipment, but the most important is the lack of a combination of professional self-controlled drying equipment and reasonable issues. The different materials mentioned in the previous machine also have different requirements. The same material has different requirements for different control methods. The role of automation control is well known as a clothes dryer, but it is also a investment control device that one-time investors are most concerned about, sometimes even exceeding the dry price of the mechanical parts. Unreasonable or if the program cannot handle the waste caused by the request or investment, these are the concerns of investors. Should be applied to the drying and drying process to determine the most reasonable means of control, dry specific projects to determine the appropriate control means should be carried out.
(4) Specially high value-added dry research In recent years, various new materials have successfully covered all aspects of the country's products. Many new materials, stable product quality, strict control of the drying process, high-tech, high value-added materials. At the same time, new materials seem to be drying up with new challenges. Ultrafine powders, such as physics, materials made of large-viscosity powders, and dry nanoparticle powder capsules are a pressing specialty for drying.
(5) Amplification studies: This process of drying equipment, expanding geometry is not just about fluid mechanics amplification, mechanics, thermodynamics, heat transfer, materials science, corrosion removal, and electrical control subjects. Some problems may occur during the amplification process. The drying equipment is enlarged and therefore not a simple geometric enlargement. In this respect, it depends to a great extent on the experience of industrialization, the physical properties of materials and the knowledge of drying equipment. The phenomena that may occur during the amplification process should be reasonable and objective and corresponding prediction procedures. The amplification effect The so-called research is to grasp the theory of drying and drying techniques, accumulate practical experience, and at the same time pay attention to the expansion of the engineering experience of the amplification equipment.
It is expected that during the “10th Five-Year Plan†period, China’s drying equipment will have a market share of 90% in the domestic market. At present, there are two approaches to regional problems and technical innovation capabilities where performance is problematic. The majority of the enterprises in the drying equipment industry in China's drying equipment industry have gradually generated early-stage enterprises, relatively concentrated geographical locations, and serious defects in the personnel structure. So far, the enterprises are mainly distributed in Jiangsu, Zhejiang, Shanghai, Liaoning, and black. These enterprises account for almost 50% of the total number of the entire industry. In sharp contrast, some regions do not have dry equipment manufacturing in China. Business. In a highly competitive industry, some companies focus on immediate results, do not need any systematic development, improve the overall quality, and progress slowly, which seriously hampers the normal development of the industry.
Although there are many of our dryer equipment dryers, advanced countries still have far fewer industries than this consensus. How to improve the level of drying technology in China's accession to the World Trade Organization to deal with competition from all parties is the most thought of the dry industry. Combine expert opinions with the following suggestions on the water scarcity situation in China.
Increased user identification capabilities, drying equipment
Drying plant in China so much, and can be based on the market. It should be said that a large number of drying equipment in the factory production equipment technology and certain differences, the quality of the product, but why survive, it has the ability to establish a good relationship with other user groups. Drying equipment and other general machinery equipment, in addition to the quality of the appearance of different factors that indicate the technical content, the use of effects can not find the user. Drying due to fewer users is able to identify an objective, inferior dry plant that provides living space. Promote market penetration and purify dry knowledge, integration can play an active role in the market. Only in this way can the manufacturer survive and develop in the market where the fittest survives. Although the drying equipment is a special product rather than the user can not determine their own advantages and disadvantages in selecting a drying equipment drying equipment to deal with the following plants should be investigated.
(1) A visit to the factory plant research should first understand whether or not there is any material in the plant laboratory equipment, and the experimental results of the experimental data. Seriously listening to the phenomenon of plant experiments. The model needs to know if there is a manufacturing capacity of the processing plant means that it can ask to listen to the processing method in the factory type declaration.
(2) The level of factory performance depends to a certain extent on fulfilling its performance under normal conditions, with stronger capabilities to equipment manufacturers. Because by improving the production equipment technology. If it is the first time to create the model must be careful when the user's mature technology should seriously argue.
(3) Reliable drying equipment and maintenance to keep users from using the process sometimes difficult to solve this problem. Some common non-consumable parts factories can provide users with permanent technical advice, and the parts suppliers must consider when selecting drying equipment. Respond to other users to visit the factory in order to understand business reputation.
(4) The model mentioned earlier in the same study as the drying process during the amplification process will also appear in this issue in one or another way. Investigate whether there are user requirements, experience, and specifications for the same model of the manufacturer. If the accumulated experience of the equipment is relatively high success rate in this area.
(5) Examine the same or similar materials for further study, if drying the best plant material is dry, provide the same experience. This can improve the credibility of the project. Despite this kind of drying is very professional subjects non-professionals are hard to master in a short period of time. If possible, the best access project to hire expert quality dry options can enhance reliability of the plant equipment.
Strengthening basic research work
For many years, domestic drying equipment was mainly equipment, lacking the characteristics of imitation, and they themselves lacked competitiveness in the international market. First of all, according to the level of drying equipment drying technology is the current drying equipment manufacturers have created a lot of research, development of less dry, but technical staff. Drying equipment and some foreign companies engaged in technological development of some droughts and even more than some manufacturing personnel have been fighting for high technology in the market. If you want to have some professional standards that are highly competitive at home and abroad, refer to a complete test and development base. An effective way is to establish an integrated research and production institution, and the production of scientific research departments at the same time again to support research and production enterprises to improve the level of skills of dry goods in order to increase the technical content and production potential. The main points of technical development in the process are the following:
(1) Strengthen basic research on basic theory The basis of the research is that the development of new technologies is not only to strengthen the drying technology in the field of basic research, the continuous development of drying, and the development of drying technology to promote the progress of drying equipment. The basic research of a fully controlled basic research laboratory equipment should be established at our universities and research institutes to dry bases. The in-depth study of the mechanism, technological development, and thus laid the theoretical foundation, such a drying equipment in China to take a gradual approach to independent innovation.
(2) The physical properties of the research materials cannot be separated from the characteristics and requirements of the dry materials. Due to the different nature of the material, drying equipment will constitute a complex and versatile structural machine. For those who have been industrialized mechanisms, the structure of drying equipment and drying equipment is not difficult to grasp more difficult adjustments is the specific structure of the material to meet the requirements of the material drying. Drying equipment and technicians are more than factory machinery and equipment, school-based professional drying equipment, they are often regarded as a purely mechanical product. The limitations of professional teaching materials, which make them relatively neglected physical defects of the material nature of the resulting equipment are not ideal. Therefore, successful machine design is first and foremost a correct understanding of material and mechanical design is reasonable. Therefore, the amount of drying equipment design should focus on the study of the physical properties of the material.
(3) The automatic low-level automation of drying equipment is controlled by a common problem behind. It is not difficult to solve the control problem with the current degree of automation of the drying equipment, but the most important is the lack of a combination of professional self-controlled drying equipment and reasonable issues. The different materials mentioned in the previous machine also have different requirements. The same material has different requirements for different control methods. The role of automation control is well known as a clothes dryer, but it is also a investment control device that one-time investors are most concerned about, sometimes even exceeding the dry price of the mechanical parts. Unreasonable or if the program cannot handle the waste caused by the request or investment, these are the concerns of investors. Should be applied to the drying and drying process to determine the most reasonable means of control, dry specific projects to determine the appropriate control means should be carried out.
(4) Specially high value-added dry research In recent years, various new materials have successfully covered all aspects of the country's products. Many new materials, stable product quality, strict control of the drying process, high-tech, high value-added materials. At the same time, new materials seem to be drying up with new challenges. Ultrafine powders, such as physics, materials made of large-viscosity powders, and dry nanoparticle powder capsules are a pressing specialty for drying.
(5) Amplification studies: This process of drying equipment, expanding geometry is not just about fluid mechanics amplification, mechanics, thermodynamics, heat transfer, materials science, corrosion removal, and electrical control subjects. Some problems may occur during the amplification process. The drying equipment is enlarged and therefore not a simple geometric enlargement. In this respect, it depends to a great extent on the experience of industrialization, the physical properties of materials and the knowledge of drying equipment. The phenomena that may occur during the amplification process should be reasonable and objective and corresponding prediction procedures. The amplification effect The so-called research is to grasp the theory of drying and drying techniques, accumulate practical experience, and at the same time pay attention to the expansion of the engineering experience of the amplification equipment.
Cummins Truck,Cummins Industrial,Ht3B Turbocharger,He551V Turbocharger,hc5a turb
Fengcheng Fire Turbocharger Manufacturing Co; Ltd. , https://www.fireturboexpert.com