Metal detector splitter
 Metal SeparatorApplication:
Metal separator is used for the detection of industrial products of iron, stainless steel, copper, aluminum and all other metal impurities, such as in the food, plastics, pharmaceutical products production process,it's easy to mix metal impurities, not only affect the quality of products, also do a lot of harm to consumers.
During the plastic molding process, thin metals inside the raw materials always present invisible hidden hazards to our molding equipment, for example, screws of molding machines are abnormally worn and torn and nozzles are blocked, etc. Most of those hazards are caused by metals existing in the raw materials. HADRDEGA also has perfect solution for hazards of that field Technical parameters:
| MODEL | MATERIAL INLET DIAMETER |
Production output (processing capacity) |
Detection accuracy |
| BH-20 | 20mm | 100L/hr | Fe:0.2mm SUS:0.5mm Cu/Al: 0.35mm |
| BH-30 | 30mm | 400L/hr | Fe:0.3mm SUS:0.7mm Cu/Al:0.45mm |
| BH-40 | 40mm | 1000L/hr | Fe:0.4mm SUS:0.75mm  Cu/Al:0.5mm |
| BH-46 | 46mm | 2000L/hr | Fe:0.5mm SUS:0.8mm  Cu/Al:0.55mm |
| BH-50 | 70mm | 5000L/hr | Fe:0.8mm SUS:1.4mm  Cu/Al:0.85mm |
| BH-60 | 100mm | 12000L/hr | Fe:1.2mm SUS:2.0mm  Cu/Al:1.35mm |
| BH-70 | 150mm | 30000L/hr | Fe:1.8mm SUS:2.2mm  Cu/Al:2.1mm |
Â
Main Feature:
(1) The rapid separation of various metals in plastic materials, including "ferrous" and "non ferrous"
(2) High sensitivity, small metal particles such as 0.4mm, which can be adjusted according to the actual production
(3) Full automatic operation, saving manpower
(4)Each package of plastic processing time is about 4 minutes
What can we bring for you?
Reduce damaging risks of metals existing in the raw materials to screws of the molding equipment and decrease the maintenance costs;
Avoid production halts which are caused by blockage of nozzles of the moldings machine;
Improve quality of the products and the production efficiency
Equipment installation
Can be installed on the charging basket;
Can be installed on the molding machine;
Can be installed inside the pipeline.
The vertical calico light box can be made of single and double sides, and can be installed with batteries. It is convenient to move and can be placed wherever you want.
Soft film light box mainly consists of four parts: picture, aluminum alloy profile, LED light and base plate; The four sides of the light box are surrounded by aluminum alloy profiles to form a box and fixed with connectors. The picture is stuck at the bayonet of the aluminum alloy profiles. The LED light is installed on the board. When the light is turned on, the picture is lit by the light.
Advantage:
1. Energy saving: The light of the Kabu light box has no infrared and ultraviolet radiation. [1]
2. Color: Cabo light box uses the principle of three primary colors, so the changes are very bright.
Applicable scenarios:
Mobile shop billboards, airports, parking stations and other indoor and outdoor occasions can be installed by hanging, erecting, hoisting and other installation methods. Pictures are easy to change and save, which is convenient for use in general activities.
Stand Light Box,Lightbox Stand,Aluminum Light Box,Led Light Box Display Stand
Guangzhou Jinshiming advertising equipment Co., Ltd , https://www.gzjsmad.com