In the use of Ito generators when we should pay attention to what matters, Ito company here to give you a brief introduction to the operation of Ito when the precautions, I hope to be helpful to everyone.
1. The nature of diesel has a great influence on the power of diesel engines and the reliability of economic performance.
2. Use oil with CF above or VOLVO oil for engine oil.
3. The cooling liquid coolant should provide sufficient heat transfer capacity, in addition to the main anti-corrosion, anti-freeze. Coolant should be mixed with water and glycol or corrosion inhibitor. The PH value of water is between 6 and 8, must use the clean water that meets the requirements of ASTM 4985, or distilled water, the specific mixing ratio is 50% VOLVO antifreeze and 50% pure water, can not freeze when the temperature is as low as about -40. Should be used throughout the year.
4. The operating machine pressure should be within the range of 2-5Bar. Check whether there is any oil leakage or water leakage at the connection between the piping system and the parts. Smoke exhaust color is normal, with or without abnormal noise. No-load low-speed operation time should not be too long. Trial operation When the temperature and oil pressure of the diesel engine of the Ito generator set are normal, the rotation speed is increased to the rated value, and the operation should be stable.
5. Gradually increase the load and speed increase should be gradually and evenly, no sudden or sudden load reduction under special circumstances.
6. The normal generator shutdown should be conducted a comprehensive inspection to observe whether the machine has any faults, so that it can be processed after shutdown. When shutting down, it should not be stopped by opening the decompression mechanism or closing the tank switch. Before the stoppage, the load is gradually unloaded, run for 3-5 minutes without load, and many departments evenly cool. This is particularly important for turbocharged oil engines. Shutdown by stopping device, such as stop solenoid valve, electromagnet and so on.
In any of the following cases, you must stop the machine:
1. Oil pressure gauge indicates sudden drop or no pressure
2. The cooling water temperature or oil temperature rises sharply.
3. The speed increases automatically and there is a racing phenomenon.
4. Abnormal knocking noise or loosening of the transmission mechanism.
5. The explosive use of diesel engines occurred on site. At present, the unit control system has many self-protection systems, such as oil pressure, water temperature, and overspeed protection, and there is an emergency stop device. By closing the throttle, the diesel engine stops working. If necessary, it can also be stopped by blocking the air filter.
Related reading :
Shanghai Ito Power Co., Ltd. Main : Ito Gasoline Generator , Ito Diesel Generator , Ito Small Pump , Ito Digital Generator , Ito Electric Welding Machine
In Maxmach (hangzhou roll forming machinery co.,ltd),there is a strong technical team .we can design different profile with different thickness Special Profile Roll Forming Machine.
such as Rafted mill Roll Forming Machine ,Strut Rafted Mill Roll Forming Machine,post roll forming machine,Grain Silo Plate Roll Forming Machine,Acoustic Panel Post Roll Forming Machine,rolling forming machinery,cold roll forming machine, Rolling Forming Machine ,custom roll forming and so on.
Special Profile Roll Forming Machine
Strut Rafted Mill Roll Forming Machine,Grain Silo Plate Roll Forming Machine,Acoustic Panel Post Roll Forming Machine
HangZhou Roll Forming Machinery Co.,Ltd , http://www.m-rollformingmachine.com