The transmission is a transmission device on the suction truck used to coordinate the engine speed and the actual traveling speed of the wheels, and is used to exert the best performance of the engine. The transmission can produce different speed ratios between the engine and the wheel during the process of the suction truck driving, and the engine can be operated under its optimum power performance state through shifting. The role of the transmission is very great. If the oil leakage from the transmission will be detrimental to traffic, let's talk to you today about what we should do if the suction truck leaks oil.
First of all, to understand the causes of transmission oil leakage, transmission oil leakage reasons:
First, the suction truck is filled with too much lubricant and causes the oil to diffuse.
Second, transmission oil drain plug loose.
Third, suction truck transmission transmission fork shaft oil seal at both ends of the poor sealing caused by oil spills.
Fourth, the transmission shift ball head out of round, ball head and seat is not tight, carburetor tempering, exhaust pipe blasting and so on.
From the above reasons we can see, if the suction truck transmission oil leakage, we can first check whether the transmission of oil is too much; then check the bolt is not loose; seal gasket is not damaged; transmission ventilation port is maintained Smooth. If there is no problem in these places, then seal the leak, that is, after the surface of the sludge is cleaned and sealed. If it is found that there is damage inside the transmission of the suction truck, it must be sent to a regular repair shop for repairs, and check that the shaft journals and the joint surfaces seal well. Do not ignore the problem of the suction truck transmission, so as to avoid the problem of small problems.
Description: Spray Dryer drying is the technology most widely used in the liquid technology shaping and in the drying industry. The drying technology is most suitable for producing solid powder or particle products from liquid materials, such as: solution, emulsion, suspension and pumpable paste states ,For this reason, when the particle size and distribution of the Âfinal products, residual water contents, mass density and the particle shape must meet the precise standard, spray dryer drying is one of the most desired technologies. Work Principle: High Speed Centrifugal Spray Dryer Series of LPG is gas-liquid co-current flow drying equipment, using high-speed centrifugal atomizer, the liquid will be atomized into fine droplets, then mix with the hot air from the distributor in the dryer, heat and mass transfer exchanges rapidly during the mixing process. In a very short period of time the liquid become dry powdered products. Production control and product quality control is convenient and reliable. It is widely used in the drying production of different types of liquids materials.
Food Engineering Industry,Food Powder Drying,Engineering Industry,Chemical Engineering Industry
Changzhou Ruide Drying Engineering Technology Co., Ltd , https://www.rddryer.com