"Ten thousand pieces of red rosewood palace chairs cracked," "Hundreds of thousands of rosewood office tables arched up..." In the early years, users such as mahogany furniture users often complained. After all, this is due to improper drying of mahogany furniture.
Since the Zhongshan People's Political Consultative Conference has promoted the development of Zhongshan's industry through internal information and research, etc., as an important demonstration project of transformation and upgrading and technological innovation, Dayong Hongmu Drying Center has its own leading vacuum drying sheet technology, and has achieved technological innovation in the Redwood industry. Walking in the forefront.
"Sawn timber drying" and "finished product drying"
Many of the furniture circulated in the mahogany furniture market have dried lumber for the drying process before the furniture is formed. Even some companies use the oldest natural air-dried products.
According to experts from Hong Guxuan, in the drying of mahogany wood, if the balance between wood and local humidity can be fully ensured, the moisture content of the wood is controlled within the range of 8% to 16%, and the furniture made can hardly be cracked and deformed. . The so-called drying of sawn timber is actually a “cluster†treatment of wood. It is a process of drying and processing the thick and thin plates after saw logs. It does not change the “group†processing because of the difference in sales to the place. method.
She said that because of the different climatic conditions in each city, the “group†treatment of “dry sawn timber†can hardly avoid the problems of cracking and deformation in the production base to the user’s home. This is the most fundamental reason why mahogany furniture imports "dry products."
Drying of the finished product is “finished furniture†made of wood that is used to dry sawn timber in mahogany furniture. According to the temperature and weather changes in the user's location, the appropriate drying temperature control is adjusted and the drying process lasts for about 7 days.
Insiders pointed out that the tropical hardwood drying is a recognized technical problem at home and abroad, and it is also a technical bottleneck for the development of the mahogany furniture industry. The two-pronged drying method of “sawn lumber drying†and “finished product drying†today has increased the manufacturing cost, but it has improved the quality and quality of furniture, and has also pushed the personalized quality control and service of mahogany furniture to a New situation.
Annual drying capacity reaches 50,000 cubic meters
According to the “Introduction of Dahong Town Redwood Furniture Industry†issued by the Dazheng Township Government, the Dayong Town Redwood Furniture Association has established a wood drying center for the long-life cycle of the original drying method, high wear-out rate, and the tendency to cause wood deformation and deterioration. Purchased the most advanced complete set of automatic wood drying system in the country, shortening the timber drying cycle from 6 months to 15 days, and increasing the production rate of high-quality wood from 60% to 95%. Only this one is 216 mahogany trees in the town. Furniture companies reduce the loss of more than 12 million yuan.
In 2002, Dayong Hongmu Furniture Engineering Technology Center cooperated with Guangzhou Energy Research Institute of Chinese Academy of Sciences to develop and develop an intelligent control system for wood drying, which was developed from the first generation to the fifth generation. At present, Dayong Town has formed an international leading vacuum-dried red wood veneer technology. In 2008, it established a mahogany drying center with an area of ​​30 acres and an annual drying capacity of 50,000 cubic meters.
Dayong Hongmu has already made breakthroughs not only in the aspect of drying but also in the treatment of paint pollution. For example, in 2004, Dayong Hongmu Furniture Engineering Technology Center cooperated with Xi'an Jiaotong University to develop environmentally friendly waterborne polyurethane furniture paint and cracked the bottleneck of mahogany furniture paint pollution.
At present, Da Yongzheng has gradually carried out a variety of levels of cooperation in various forms of government, industry, research, and research. In the cooperation practice of production, education, and research over many years, a multi-level and multi-modal cooperation model has been initially formed and the effectiveness of cooperation has been achieved. The company has formed its core competitiveness as "Dong Chung Innovative Product Design", "Dong Chung Advanced Timber Drying Technology", "Dong Chung Perfect Standardization System" and "Daiyong Hongmu Furniture Regional Brand".
Vulcanizing agent is to make the rubber linear molecular into a three-dimensional network structure and mechanism through the vulcanizing agent for bridging, so significantly improved the rubber mechanical and physical properties. Ningbo Actmix produce a varierty of rubber vulcanizing agent, including S-80 masterbatch, non-sulfur odor curing agent CLD-80 can be substituted DTDM; AEM/ACM rubber vulcanizing agent HMDC-70 & TM-70(TCY-70); HVA-2-75(PDM-75) is a sulphur-free vulcanization agent, can be used for rubber cable, solve the copper wires due to exposure to sulfur vulcanzing agent generated black copper sulfide pollution problems.
Vulcanizing Agent, Non-sulfur odor curing agent CLD-80, HVA-2, Vulcanizing agent for AEM/ACM, Sulphur-free Vulcanization Agent, S-80 Masterbatch
Ningbo Actmix Rubber Chemicals Co.,Ltd. (Ningbo Actmix Polymer Co.,Ltd.) , https://www.actmix-chemicals.com