Ou Ke frequency changer dredging boat in the application

Ouke inverter dredging can achieve the start and stop can be controlled by the inverter keyboard to make control easier. A frequency converter frequency given way is the keyboard potentiometer given another frequency converter frequency given way is given an external potentiometer, in order to distinguish between the two machines color, the other one, you need to reverse the operation, During the operation of the conveyor belt slower, it is recommended that customers use relatively large speed reducer, to solve the problem of low frequency inverter torque. Before starting the entire mechanical transmission system and machine oil to check, and then open ...

Ouke inverter dredging can achieve the start and stop can be controlled by the inverter keyboard to make control easier. A frequency converter frequency given way is the keyboard potentiometer given another frequency converter frequency given way is given an external potentiometer, in order to distinguish between the two machines color, the other one, you need to reverse the operation, During the operation of the conveyor belt slower, it is recommended that customers use relatively large speed reducer, to solve the problem of low frequency inverter torque.

Before starting the machine, check the entire mechanical transmission system and machine oil, and then start pulling the conveyor belt behind the diesel engine, pull the clutch, start the diesel engine, slowly loose the clutch, the speed to normal. Then start the front zipper fighting diesel engine.

Two diesel engines after starting. Adjust speed to speed. Then release the boom brakes. Slowly down, wait for more than 2/3 of the sand in the hopper, you can stop decentralization, to be funded until the next 1/3 of the arm. When the boom and the water surface into a 45 degree angle (ie about 5 meters), should park the boom. At this time, the amount of sand in the hopper is switched to traction control. When going forward, it is necessary to check the number of sand in the bucket. The forward and backward movements should be flexible. In case of hard working of collapsed sand machine, Retreat until digging. If there is a big stone or muddy layer in the water, the hull will have violent vibration phenomenon. At this moment, the dredging boom should be lifted immediately to avoid the obstacle.

Waste Lube Oil Distillation Plant

1. Introduction of waste lube oil distillation plant

Waste Lube Oil Distillation Plant ,is the new technology which can refine the waste lube oil into base oil(which can be made into diesel and gasoline after processed by our catalyst). The oil quality is better than the original normal pressure distillation technology, which show on purity ,transparence, lightness .this technology will do deodorization and destinke process to the raw material oil automatically by "dry type" vacuum pressure distillation method. With the vacuum distillation technology, the distillation temperature is considerably reduced, and the oil output will higher 5%-10% compared with original normal pressure distillation technology. It makes more profits to the enterprise virtually.

2. Raw material which can be used

a. Waste oil .example: waste diesel, waste oil residue etc.

b. tire/rubber oil

c. plastic oil

d. crude oil

e. waste engine oil

f. waste motor oil

g. waste lube oil

h. waste transformer oil

i. underground oil

3. Models of waste lube oil distillation plant

4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the waste lube oil distillation plant ,and buyer will be in charge of the food, accommodation and round air tickets.

5. Waste Lube Oil Distillation Plant Exporting Experience:

Waste Lube Oil Distillation Plant,Continuous Lube Oil Distillation Plant,Lube Oil Recycling Plant,Essential Oil Refinery Plant

Shangqiu Sihai Energy Technology Co., Ltd , https://www.sihaienergy.com